The wlan_minidump_remove function utilizes the updated kernel API.
So, modify the function definition and parameters accordingly.
Change-Id: Ib62a46688400d5d9c2ff45c17dc41d5f0b7f58d0
CRs-Fixed: 2860432
For STA mode with STA CAC enable in auth/assoc state of assoc sm,
a northbound disconnect request would have to wait until CAC and
assoc is completed and connect request is removed from serialization
queue. During which OSIF timeout is seen as CAC can exceed the
serialization timeout of 60s.
Add change to handle EV_DOWN in disconnection progress state which
brings down the connection immediately on receiving a disconnect
request.
Change-Id: I301e49164c69df99e4617dd6fbc012e449963521
CRs-Fixed: 2882876
This change notifies MLME about DFS CAC WAIT state,
and removes code, which releases PDEV RESTART and
enqueues STOP-START command
Change-Id: Iaaf4b657c4f95330e3ac383adc74211b23006718
CRs-Fixed: 2862724
If STA DFS is enabled before vdev creation through etc/config/wireless
then VDEV START is sent to F/W as a part of the normal flow to bring
the VAP up. However, if STA DFS is enabled/disabled on the fly for a
running VAP then do a VDEV STOP, followed by a VDEV START of the STA
VAP and set/unset WMI_CHAN_FLAG_STA_DFS flag in VDEV start.
Change-Id: I032ffa53d89eaafcb43c648670af3b3f2134561f
CRs-Fixed: 2843248
Currently on vdev start WMI_CHAN_FLAG_DFS flag is being set
irrespective of the device mode which may lead to unexpected
behavior in FW.
To address above issue set WMI_CHAN_FLAG_DFS flag in vdev
start only if vdev is operating in ap mode.
Change-Id: I96b291ad137b96e40c6620c86f50860670595ae0
CRs-Fixed: 2808013
Add support to send preferred_xt_streams and preferred_rx_streams
in multivdev restart.
CRs-Fixed: 2833470
Change-Id: I2c06a8bd9a64b15126e216eeb65699e104cbca64
Add change to support mlme ops to enable enqueuing stop-start
cmd to serialization queue when CSA is triggered for a DFS channel.
Change-Id: I9f2dca3bc4ccfe40bd40c7e04b3ce035df56d19d
CRs-Fixed: 2825760
Compiling with gcc 9.3 will cause many implicit-fallthrough
compile errors.
Fix is to add keyword fallthrough to resolve such compile error.
Change-Id: I2e7dd1525861d951e3be44f6665e149499f0f5d6
CRs-Fixed: 2785178
dfs_curchan isn't reset when start vdev on 2G channel, can't use it.
Reproduce steps:
1. DUT vdev1 SAP started on 5G DFS channel with HE160,
WMI_CHAN_FLAG_DFS_CFREQ2 is set.
2. DUT vdev1 SAP switched to 2G channel.
Found WMI_CHAN_FLAG_DFS_CFREQ2 still set.
Change-Id: Ic5282ddf667af92365f3e43274a010a26a5a0715
CRs-Fixed: 2787305
This will help to configure desired rate mask. It can be
used to optimize link performance.
Change-Id: I15b6fbc512d9b0869a6ad6a6f24f1593abf14dae
CRs-Fixed: 2758871
This change allow Tx VDEV of MBSS mode to configured
dynamically by reset the VDEVs.
This change includes FW service bit parsing, checking
VDEV state of all VDEVs, sending MBSS information in
VDEV start command
Change-Id: I46b13629bd1c07be86b408d72c2967642ce8542e
CRs-Fixed: 2759229
For SAP on DFS channel, the PCIe link down should be prevented
so that HalPhy can access DDR memory to report Radar found event.
Change-Id: I5eb1076196c509f0279781dbe3269d62132aeabc
CRs-Fixed: 2712800
Special vap type is used by scan radio solutions.
Indicate special vap type to FW through
vdev create WMI command.
CRS-Fixed: 2746724
Change-Id: Ie5e4b059306c5c80d93dba0ebb4810b3e570878f
Both (ETSI) PreCAC and RCAC are going to use use the same state
machine. The state machine drives the Agile engine and not very specific
to RCAC or PreCAC, therefore let the state machine be called agile state
machine and change the names of all the associated variables accordingly.
In this preparatory change, modify names of all APIs, states and events
to make them common to Agile RCAC and Agile PreCAC
Change-Id: I67858839589145bf4377a7eafec7c21ca4823141
CRs-Fixed: 2711104
In case of MBSSID, fils or 20tu unsolicited probe response frame
is required to be sent only by the tx-vdev. 20tu frames (fils or
probe response) sent by the tx-vdev carries the specified information
about the non-tx vdevs.
Currently, fils_enable wmi cmd is being sent by default to fw at
vdev_up of each vdev. Avoid sending this cmd in case of non-tx
vdev in MBSSID mode.
Change-Id: I6d6f85489baf34b282f012227f211388647fdb4e
CRs-fixed: 2727143
There are different version of SSID structure used in driver, replace
them with struct wlan_ssid.
Also move struct element_info from scan module to generic structures.
Change-Id: Ia32f82d943980c23b4ff478f5a06c5c053036de5
CRs-Fixed: 2721872
Add change to return the error value to the caller in case when
the VDEV start fails for STA VDEV.
Change-Id: I8585e1233609113158231ec7104cf5046af23cd5
CRs-Fixed: 2698826
Add change to define restart bitmap using the generalized bitmap
declaration. Also use generalized function to check if any of the
bits are set in the bitmap.
Change-Id: I06859fc089f121559231a7e13bcab63322e5ef9b
CRs-Fixed: 2690914
Enhanced Multi-BSSID Advertisement is an enhancement to the
existing Multi-BSSID feature in terms of advertising
non-transmitted bssid profile using the transmitted bssid
beacon. Mandatory inclusion of RNR IE in lower-band AP
beacon to support Out-of-Band Advertisement of colocated
6Ghz AP may impose limitation in the beacon size. EMA AP
provides a standardized way of overcoming such a limitation
Relevant UMAC changes are:
1. Add fw_caps_ext support bit WLAN_SOC_CEXT_EMA_AP
2. Add vdev_control_flag WLAN_VDEV_MLME_FLAGS_EMA_MODE
3. Support of 32-bit ema_params in beacon_tmpl_params.
The 4 octets in this param field will respectively
indicate ema_beacon_profile_periodicity, ema_beacon_tmpl_idx,
ema_first_tmpl and ema_last_tmpl in the order of low to high
CRs-fixed: 2677701
Change-Id: I3d96fd3becd7609abb2529f977362bfa5401d600
Trigger Rolling CAC SM events from
- NOL expiry (EV_RCAC_START) to trigger RCAC START with a
new channel if possible and not already running.
- Agile radar (EV_ADFS_RADAR_FOUND) to restart RCAC with a
new random channel.
- vdev restart (EV_RCAC_STOP) to stop the running RCAC when
the primary channel changes. Start will be based on the
availability of the new channel.
In case of the rolling CAC feature, a channel is programmed to
the agile detector on which CAC is running continuously.
Introduce an API that finds an RCAC completed channel and return
the channel params which will be used for the next channel
change.
Also add a boolean argument in dfs_set_current_channel api to
indicate if the dfs current channel is updated in the API
"dfs_set_current_channel".
CRs-Fixed: 2674621
Change-Id: Ica54a57f131cd54e47138f1cbeef2dd0023390ed
Support synchronization of Tbtt in multi SoC case.
Add WMI to send vdev details of one soc to another.
Info includes beacon interval, bssid and tbtt calculated
in host wrt to other Soc.
Change-Id: I465140268b0fe5e0cb69f636ebeb08dc80667cf7
As a part of vdev responses from the FW, the driver fetches the
appropriate vdev_response_timer info using the vdev_id. This vdev_id is
taken from the response coming from FW. Currently, this vdev_id is not
being validated and is being used to access the array psoc_vdev_rt. This
can potentially lead to out of bounds access.
Add validation to the vdev_id before performing the fetch operation.
Change-Id: I6f25a14ccc3c8a96a1b6c863a760809c29de4003
CRs-Fixed: 2658462
Changes to support Beacon protection. Additional key ix 6 and 7
support BIGTK. Update beacon template for Beacon protection support.
CRs-Fixed: 2632290
Change-Id: Ic37d17f5076bb28d2e1f2430da039cc8b9f759b6
When staDFSEn option is enabled in the UCI, radar detection fails on a
STA VAP.
In the function vdev_mgr_start_param_update,since there is a condition
check for QDF_SAP_MODE and QDF_P2P_GO_MODE, the
tgt_dfs_set_current_channel_for_freq function does not get calledin case
of STA opmode.
As a result, DFS flag does not get set for the dfs->dfs_curchan,
and DFS_RADAR_EN flag does not get set for dfs->dfs_proc_phyerr.
Therefore, within the function dfs_process_phyerr, the function returns
without processing the radar pulses.
To fix this issue, add a new function
vdev_mgr_check_opmode_and_des_chan_freq under a macro
QCA_MCL_DFS_SUPPORT. If QCA_MCL_DFS_SUPPORT is defined, check the opmode
of the vdev, and frequency band of des_chan_freq. If QCA_MCL_DFS_SUPPORT
is not defined, return true.
Change-Id: I66fe3d4ccc0b75b70652b04f9bf93b199268f1fa
CRs-Fixed: 2640208
Add support for WMI event to host to process
dynamically selected Muedca values and update
the mgmt frames with the new set of values.
Extract the params and store in Muedca_param
struct from control path, to be used for
updating mgmt frames.
Change-Id: I6cc7756d1a246ff994edef195f6191d280bc5c47
Handle minidump logging using dynamic
configurablity options. Data structures
to be logged in minidump can be configured
using internal INI file.
Change-Id: I99f12b3f98c4a9c0e15c3e5d611019e6b8d0909a
Add change to increase vdev id bitmap size to the number of vdev ids
bitmap as sent by the FW to avoid memory overflow on host.
Change-Id: I92a2ae31cf0079c989b1788afc61e7f3153dc426
CRs-Fixed: 2626887
Remove pdev, vdev and peer dp handles from umac objects,
and also remove corresponding APIs used to set and get
these handles
Change-Id: I1abc8ba91e9a697b85d1711a9a37ce675e1f6d3d
CRs-Fixed: 2602133
SAP not advertising 20TU probe response when
FILS Discovery is disbaled through ini.
Updated WMI fields to enable 20TU probe response
when 6Ghz SAP is operating.
Change-Id: Idc4b95047d2149f68a68a434afda4d325a5d0547
CRs-Fixed: 2600485
6Ghz SAP needs to send either a probe response or fils
discovery at every 20ms.
Add a new feature to configure the probe response or
fils discovery frame.
Change-Id: I3b9842021db94515ae4dccbcdc573a4cd84caa56
CRs-Fixed: 2591147
Currently cdp ops are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev_id or vdev_id or peer mac address,
which will be used to get the respective handles,
and hence avoiding the unwanted access of the
handles if it has been deleted.
- txrx_peer_unmap_sync_cb_set
- txrx_fw_stats_get
- txrx_get_ctrl_pdev_from_vdev
- txrx_get_mon_vdev_from_pdev
Change-Id: I4472dc0905edb7700acb4401b117c8876ba455f3
CRs-Fixed: 2541460
Add WMI and objmgr support for maintaining RNR
buffer cache and receive tbtt events for all
vdevs using existing tbtt offset WMI.
Change-Id: Idfed63e104e629fbe455d1cf6202cd9b332f5cf9
Add code to change the vdev_mlme timers to psoc_mlme timers
and also change code to send vdev_delete to FW while physical
destruction of vdev obj.
Change-Id: Ie041182155c75d0cc3825dc97b26abc6be38d76c
CRs-Fixed: 2563931
As part of the new changes, vdev mlme object will be freed before
the vdev delete response is received from the firmware. Hence do
not use the vdev_mlme object in the vdev delete response handler.
Change-Id: I6b2db32ac0ef415bf1b879b2cd222de67d9a69b7
CRs-Fixed: 2563404
Wakelock is system level lock not required to be taken
for every vdev, Hence move the wakelock to the psoc
hierarchy.
Change-Id: I525baf5f4b5dcadb493d84900dbd0a2e7c6407f6
CRs-Fixed: 2563406
Move the vdev response timer from the vdev object manager structure
to the psoc mlme structure.
Change-Id: Ieb87ac6549aa23e0beb61441fea459d3db78c2f3
CRs-Fixed: 2563410
