RSSI calibration parameters are received as part
of WMI event from FW, update these parameters to
monitor pdev via CDP interface.
Change-Id: I5060795918571763ad467aae93729040fbca96a1
CRs-Fixed: 3147897
To calculate average delay for hist-stats, use the below
formula : new-avg = (current-avg + new-delay) / 2.
During accumulation of delay-stats for all the TID's for
a peer, only the hist-buckets with non-zero counts should
be considered for calculating the various delay levels.
Change-Id: Ic930116bd650baab6a2b43e077cf55f5c79681d5
CRs-Fixed: 3178032
In the case of ME6, Backhaul WDS, NAWDS
1. Send the igmp pkt on the same link where it received,
as these features will use peer based FW metadata.
2. Bypass the reinjection.
Change-Id: Idf0058e182257fbcedd8eb5fc8bcde945e8a91bc
CRs-Fixed: 3171558
When TX completion is released from FW, dp_tx_notify_completion()
will not be invoked, then TX DCHP ACK will miss
hdd_softap_notify_tx_compl_cbk() which then
WMI_PEER_CRIT_PROTO_HINT_ENABLED with value 0 will not send to FW.
(1) move dp_tx_notify_completion() from dp_tx_comp_process_desc_list()
to dp_tx_comp_process_tx_status(), so that both TX completion release
source FW or TQM case will call it.
(2) clear TX notify flag for intra-bss forwarding BC/MC to avoid
unnecessary TX completion notify.
(3) Set ts.status for release source FW case otherwise it will be value
0 always.
Change-Id: I2bf9900a3d16ba162a83b061f0b96e7d2f79423a
CRs-Fixed: 3178423
Check for mld peer id instead of link peer id in the case of
intra bss forwarding between MLO NAWDS repeaters
Change-Id: I7af7f43e7f88c95b0debee85c0976fdb9a1c5519
CRs-Fixed: 3142943
Enable smart moniotr operations to add/delete
NAC clients and to get NAC client rssi value.
Change-Id: Ifc933d474da15101293cf3e1c07261917fb634f9
CRs-Fixed: 3169256
Add function to setup/reset lite monitor filters
whenever lite monitor mode is enabled/disabled
respectively through cmd line.
Also add function to configure rx header tlv dma length.
Change-Id: Ia5d8bc36e1d033b3e15737bb6b9854f6a7cdd5df
CRs-Fixed: 3143570
With new configuration changes for enable_peer_extended stats, update
code to peer_extended_stats naming for clean codebase.
Change-Id: I97a7ee331042232098382683fefebd05e6b099c3
CRs-Fixed: 3149920
In Beryllium architecture, PPDU_START_USER_INFO TLV carries
the user specific info for each user in a given ppdu.
Add subscription for this TLV by host for enhanced stats use case.
Change-Id: Ia12c5c3ab36198e7cd40dad0c0d92b945d2b49c6
CRs-Fixed: 3166305
a. For decapped frames, convert frames from 802.3 t 802.11
b. for non-decapped frames no conversion is needed
c. Apply radiotap header and deliver MPDU to osif layer
CRs-Fixed: 3074441
Change-Id: Ia03b4bad35d69aa292958782cd424f3df56dabbc
dp_peer hold the peer ref_cnt outside of dp_tx_notify_completion()
already, so dp_vdev can not be freed during that period if dp_peer
exist, it's not necessary that hold dp tx_desc pool lock in
dp_tx_notify_completion() which will introduce lock contention with
TX/TX Comp path.
Remove tx_desc pool lock to optimize it.
Change-Id: I5fdb9143bbc0800db74f8595f77c5a2c96d8e7d6
CRs-Fixed: 3170805
As the value of min_delay is initialized to 0,
during the updation of min_delay per-packet,the
new value is compared with 0.This results in the
value of min_delay always becoming 0.Fix this by
initializing min_delay to very high value.
Change-Id: I6dfdd88a44f68d21240c148bd5c591e04fdff92e
CRs-Fixed: 3170996
Populate punctured pattern from WIFIPHYRX_COMMON_USER_INFO_E
And get puncture type from puncture pattern.
Change-Id: I3a5ba4c7c478d15cf3c3cfdcfd0573775ae342ca
CRs-Fixed: 3166010
1. Since peer id is reused for reconnection in MLO case,
old entries for queue desc addr is cleared. Clear the reo
internal storage and reset it back on client connection.
2. Send Qref feature WMI cmd to FW to enable the feature.
Change-Id: I6705ce121c8c25d9a2ace039dab21312fa5ea4b1
CRs-Fixed: 3156642
parsing
HW desc provides 'end_offset' which can be used as delimiter
to identify status buffer boundary
Change-Id: I265ab328b80615fd2386402f0ea3797d124b8f8f
CRs-Fixed: 3157554
When a packet s destined to ML STA from a legacy peer, use
the ML peer id to identify the primary link and redirect the
packet to primary vdev for Intra-BSS.
Change-Id: Id8e6fcc9e2dd638e6d923eef50f55325fa538c49
CRs-Fixed: 3169484
Parse the tqm bypass frames packet count and byte count and consider
them for stats updation in the vdev.
Change-Id: I644eb9819b8a68fbf9da2e2f2588c80dfaa61fa5
CRs-Fixed: 3163215
Add support for tx monitor flush/drop/truncated handling
and few minor fixes from txmon
CRs-Fixed: 3158502
Change-Id: Ic13476984cd591a381941cfa1501307e9cca2b5a
Log level was accidentally increased hence reducing log level
to info to avoid unnecessary prints on console.
Change-Id: Idbe495cbdc8a17112f034083c2f8ebf297dcdc6b
CRs-Fixed: 3157393
Currently, max monitor status buffer count per ppdu is 32.
In case of multiclient test cases, number of status buffers per ppdu are
33 and leading to assert.
Increase per ppdu max monitor status buffer count 128 to take care of future
use cases like MU-MIMO, OFDMA.
Change-Id: I083304ef23a1d58af24062441d8ad9b2d229f7b1
CRs-Fixed: 3156689
Even if HW cookie conversion is enabled on KIWI, there is some
case HW cookie conversion might not be done by HW, check the cookie
conversion done bit and get Phy Address accordingly.
Change-Id: I4ee7ed9776086812774637f07da1e4504898c3c4
CRs-Fixed: 3153433
This feature can be enabled runtime using sysfs interface.
Support is added to dump and clear the histogram stats.
The lower delay regions has to be more granular to indicate any
medium related issues for time sensitive XR applications.
Change-Id: I0a44a54d12d92ce016de349810cb2bedebaf9a58
CRs-Fixed: 2981006
Populate rate index in user specific rx ppdu indication.
Also correct the computation of total retries in rx ppdu indication.
Change-Id: I07c55260def9d2f1490729b6390bca3d98085c63
CRs-Fixed: 3156428
Update the MPDU start and MSDU end word mask while setting
up rx monitor filter.
Change-Id: I17c5d809300cd2d4fc8d3b63d5e8a3d40f599a7a
CRs-Fixed: 3145449
Update dma length and mpdu logging for different packet
types while setting up monitor filter
Change-Id: I408860f15686c7999655c1e84dce5a3f7ffbbed7
CRs-Fixed: 3145400
Add support to send unit test command to FW to dump
stats on suspend failure due to pending tx completions.
Change-Id: I6afb69a862c366c66a1e1f3dc009964272dfb75a
CRs-Fixed: 3151458
Remove redundant field for rxmon global enable
and fix writing global enable field to correct
dword
Change-Id: I4efc0da559dce873bcb8721aeb0d7b7410b39dd9
CRs-Fixed: 3150784
Kiwi target does not used TX status ring.
Hence disable the tx status ring for Kiwi.
Change-Id: If3a39a0017a884bee2320188621b1f05e0c6d568
CRs-Fixed: 3150815
