Add support to send link recommendation command. This will
allow the user to pick the link that they want to utilise.
It is now the WFA prerequisite for AP.
Change-Id: I7d4459a65ce599aa5f674a3cc4a54185595ede40
CRs-Fixed: 3534151
Add nstrinfo in ml_partner_info and parse sta info.
Add nstr_info in ml_peer_ctx and peer_assoc_params
and send to FW
CRs-Fixed: 3483776
Change-Id: I255fc671b84a2048c6057a61a6de8d81db36c681
Add wmi pdev param support for long range phy param like cts timeout
slot time etc as part of enabling user config.
Change-Id: If1f3d86e09e634cde43ef8211831511781e96672
CRs-Fixed: 3520970
Add support in driver to check if FW supports per link stats
in case of mlo connection, using the wmi service event
WMI_SERVICE_PER_LINK_STATS_SUPPORT
Change-Id: I85ea50877455efc3646d3b1892ce855dc07b1dbf
CRs-Fixed: 3520338
Add WMI command support to force power save on all the
active MLO links for a defined number of beacon periods.
Force power save allows the firmware to suspend STA links
for X beacon periods and remain asleep even if the AP
advertises TIM as opposed to regular power save mode where
STA links wake up if the AP indicates that it has buffered
data to send.
Change-Id: I381a107f3f5f479b0eee4f526a49d6fc886aced0
CRs-Fixed: 3509543
Firmware sends NDP_HOST_UPDATE event as an immediate response to this
request and starts cleaning peers one by one. Once an NDP session is
ended (indicating NDP_END to peer + internal cleanup), firmware sends
NDP_END_IND to host.
Currently, host driver stops the wait timer and change state from NDP
end to disconnected upon receiving the NDP_HOST_UPDATE. But firmware
might still be in the process of NDP cleanup. As the NDP_END_ALL
context is unblocked, driver may send NAN disable request to firmware.
This may cause inconsistency in firmware state machine and firmware may
drop the ongoing NDP_END request. So, peer doesn't get the NDP_END frame
in such cases.
Unblock the NDP_END_ALL-wait call only upon last NDP_END indication to
avoid such issues. This change moves the major functionality of
NDP_HOST_UPDATE processing to last NDP_END indication. Cleanup/remove
the processing of NDP_HOST_UPDATE as it's not needed anymore.
Change-Id: I00e73d211de4626484ffb2483c00adce1a7302c1
CRs-Fixed: 3512923
Add 'max_simultaneous_links' in peer_assoc_params
and send it to FW via peer_assoc_add_mld_params.
Change-Id: Ie4c3492cf03ef43e1bb02122019cda3679fb5f3a
CRs-Fixed: 3476565
Add structure peer_vlan_config_param for
WMI_PEER_CONFIG_VLAN_CMDID to support vlan peer config
Change-Id: I2f93ce2bd10d1920d33ee0e26d1b7d344813852b
CRs-Fixed: 3492156
Add APIs to init the TSF sync capability based on
WMI_SERVICE_MLO_TSF_SYNC service bit sent from FW,
per ML group.
Change-Id: I5dad3fef7ebfa2af330b95d45cac3bef862f46f0
CRs-Fixed: 3491364
Add support to trigger UMAC reset with mode1 teardown request
for mode1 target recovery SSR.
Change-Id: Ib2d1679162a2084488081c76f6753287a6e4d5c4
CRs-Fixed: 3458369
In case of MLO connection, firmware sends each vdev's
status information using extended vdev stats event.
Add support in driver to extract it.
Change-Id: I95f2a96cb7034b5b070cc6f37a97591e01e5893a
CRs-Fixed: 3483730
Adding support for reset PN value using
WMI_HOST_PEER_FT_ROAMING_PEER_UPDATE peer command.
Change-Id: Ib486d09c80878d41efa299756e655d66babd825d
CRs-Fixed: 3490034
Set flags in WMI peer assoc to inform FW if node is
1. QCN Supported
2. Operating in Multi-AP mode
If node is 3rd party and operating in Multi-AP mode,
FW and uCode will change crypto register for each Rx/Tx from/to such nodes
Change-Id: If4cf9ec39fa11a90733df45fffa473a672643f8e
CRs-Fixed: 3488865
Add code changes to handle new wmi_mlo_link_disable_event
Extract the wmi event params and store in host defined
structure.
Change-Id: I6893bfa4da7b27f4a9b1ce2936057bb3576a317c
CRs-Fixed: 3458680
1. Read the new service capability:
WMI_SERVICE_CCA_BUSY_INFO_FOREACH_20 MHz: Via this host knows
whether FW supports reporting of CCA busy info for each 20 MHz
subband of wideband scan channel or not.
WMI_SERVICE_VDEV_PARAM_CHWIDTH_WITH_NOTIFY_SUPPORT: Via this
host knows whether FW supports VDEV param channel width switch
with OMN/OMI notification or not
2. Register osif callback to send scan done indication to upper
layer
3. Add 2 new scan flags pause_home_channel and
report_cca_busy_for_each_20 MHz
Change-Id: I63d561a3c5f8e49a3ca42d956e6b630c63edeaf4
CRs-Fixed: 3460901
Get the bit value from ini config and populate the resource_cfg,
flags2 bit related to rf_switch which will be later passed via
WMI INIT command to FW.
Change-Id: Ic642dda55850a49944bcf43838c7c5c79bed3587
CRs-Fixed: 3475088
Currently the DebugFS logic in utils/fwlog/dbglog_host.c is protected
by the flag WLAN_OPEN_SOURCE. The WLAN_OPEN_SOURCE flag is a legacy
flag which had a specific use that is no longer valid. So replace the
use of WLAN_OPEN_SOURCE with a feature-specific flag.
Change-Id: I82c51efff8dfe6673c6b9d956f974cae2d21bb69
CRs-Fixed: 3464911
Add APIs to init the TSF sync capability based on
WMI_SERVICE_MLO_TSF_SYNC service bit sent from FW,
per ML group.
Change-Id: Ie8ca48f8f6065f02eefaea85ad967e32d09787fc
CRs-Fixed: 3470139
After receiving WMI service ready ext2 event and htt msdu index to
qtype map is derived, call CDP API to evaluate whether TX ILP can be
supported or not, update the TX ILP capability to DP, also send WMI
INIT CMD to FW to notify if host has enabled the TX ILP support or
not.
Change-Id: I472ebc5c7fa4b2996b790b58274fa3c048f6d7f9
CRs-Fixed: 3447519
Extract htt_msdu_idx_to_qtype_map array from wmi service ready
ext2 event, it is needed for DP TX ILP feature enablement.
Change-Id: I64766f5b6ebc6632ce4994a8d53224d98beb5879
CRs-Fixed: 3445507
New TLVs for MLO link state information is introduced for
get link info command. Add WMI changes to add these TLV in
get link info command
Change-Id: Ib8d12a727ac6f59257dcce69174271330a065c77
CRs-Fixed: 3431076
This change is to populate wmi service for 11az TBR rsta.
Also, this adds host based enum id for corresponding wmi service.
Change-Id: I9687855651bff222616adb3a8cf346e6264688ee
CRs-Fixed: 3437035
Since special vendor roam log is not need for common roam,
add flag to filter the log.
Change-Id: Ide67de16ae68c507a7b4e81672cbf5e0fc0e4c5d
CRs-Fixed: 3442621
Add support for WMI_CSA_IE_RECEIVED_EVENTID as:
1. Register the handler
2. Handler to extract the event
Change-Id: I9f476c7fbc51d9686d05fbdb5f46dec3bcd3c29e
CRs-Fixed: 3431363
Read the new service capability:
WMI_SERVICE_TDLS_CONCURRENCY_SUPPORT for TDLS concurrencies
support. With this service capability below concurrencies are
supported:
STA+TDLS+P2P
STA+TDLS+P2P+P2P
STA+TDLS+P2P+SAP
Host driver will check this capability to disable TDLS
off channel when concurrent interface comes up. If this
service cap is not advertised by the firmware then
existing TDLS connection will be teared down when concurrent
interface is started.
Change-Id: I744775080a22ca8f3bc88894c349916eea27fd3a
CRs-Fixed: 3414266
Added change,
1. Define new DBR module DBR_MODULE_CBF to handle TxBF
standalone sounding CV data and corresponding ring
initialization.
2. API to extract new meta data TLV added for CV data.
3. API to handle standalone sounding complete.
Change-Id: Id28c5561bb8b3bf08de7ddd9aa2365e2ae99f1c2
CRs-Fixed: 3415627
