Currently in monitor mode, links are released to WBM through the
SW2WBM_RELEASE ring and WBM will feed the links back to RXDMA
through the WBM2RXDMA_LINK_RING.
WCN6450 uses SOFTUMAC architecture where WBM is not present.
Hence the WBM2RXDMA_LINK_RING is repurposed to SW2RXDMA_LINK_RING
where host will directly release the links to RXDMA using this ring.
Change-Id: I110f607e38c4c2ab10eb1bd7b1f5a7bce2f03692
CRs-Fixed: 3493368
Direct link refill ring HTT setup fails due to srng
ring id mismatch. IPA uses a max of two RXDMA_BUF
rings but the hal srng ring id has a max of 3 RXDMA
ring ids which is causing the ring id mismatch for
direct link refill ring.
The fix is to remove the addition IPA related hal srng
ring id and move the macros appropriately to make
it consistent for both IPA enabled and disabled
cases.
Change-Id: Ieb4bbf646f5f0360e4013ae3e235cc7368087731
CRs-Fixed: 3523851
In WBM2SW Rx Error path for BE
specific functionality
1) HAL API's/Function pointers are replaced
with specific function calls.
2) Efficient read/write of WBM Error Info
from HAL Rx desc.
3) Minimize reading data from Nbuf TLV.
4) Peer_id fix for MLO clients with security
Change-Id: I1c9e6e767bbf6565567d998ae8e1357398de5803
CRs-Fixed: 3486304
Add Tx TLV recording support for monitor 2.0
Also add support to control Rx and Tx TLV
recording
Change-Id: I27a0d2c9ea8bdfacd46e6b7188b45b08ed47bbcd
CRs-Fixed: 3422787
ring history array size is large. Change is aimed
to split the allocation into small trunks to avoid
memory allocation failure.
Change-Id: If977baab23718d0186ad2ce6d33319b52096f2f9
CRs-Fixed: 3479226
Currently QCA_MONITOR_2_0_SUPPORT macro is used for both TX and RX 2.0.
but on MCC side, only RX 1.0 is supported and as part of this feature
TX 2.0 need to be supported.
Enabling QCA_MONITOR_2_0_SUPPORT will enable both RX 2.0 and TX 2.0, but
to support RX 1.0 and TX 2.0, we need to separate out code under
QCA_MONITOR_2_0_SUPPORT to TX and RX 2.0 macro.
As part of this change, introduce separate macros for TX 2.0 and RX 2.0
and move the common code under both macros.
Change-Id: I7ef7e488800934291538a0bca9acd21e28901214
CRs-Fixed: 3415740
In WBM2SW Rx Error path for BE
specific functionality
1) HAL API's/Function pointers are replaced
with specific function calls.
2) Efficient read/write of WBM Error Info
from HAL Rx desc.
3) Minimize reading data from Nbuf TLV.
4) Peer_id fix for MLO clients with security
Change-Id: I760694073a06c1829f28e7e92cd1657560d8eb06
CRs-Fixed: 3472220
MC/BC frames are routed to FW ring based on routing config for MC/BC
data as SRC: FW2RXDMA and DST: RXDMA2DFW.
Data offload features in FW will take care of routing the MC/BC frames
to FW in both active and low power modes.
Make this change only for kiwi/peach using hal ops.
Change-Id: Id8665261a512c9db3e808f95082ff82b47f01ade
CRs-Fixed: 3464036
NSS value derived from HW, need plus 1 to match the sniffer capture.
Added fix to increment NSS after parsing the TLV.
Change-Id: I1e0ef3949cefa1453290e400fa4a66000a3b5dea
CRs-Fixed: 3444508
1. Check Tx halt during umac reset and avoid halt if set already.
2. Perform SRNG disable only in case of umac reset
Change-Id: Id364a6460a64e83002b5c96e08031ad2a0bc8fd7
CRs-Fixed: 3459427
Add support for 4 byte TLV tags for platforms like peach for which we
have 4 byts TLV tags.
Change-Id: Iebf48a6992c21246df3fb813b5d6ae418311f062
CRs-Fixed: 3460205
Increase the DBR ring to support DBR module
DBR_MODULE_CBF standalone sounding CV data
for QCA5332 target.
Change-Id: I4ab0741d92c7c7a32243173c87d022befa702399
CRs-Fixed: 3456418
In WBM2SW Rx Error path for BE
specific functionality
1) HAL API's/Function pointers are replaced
with specific function calls.
2) Efficient read/write of WBM Error Info
from HAL Rx desc.
3) Minimize reading data from Nbuf TLV.
Change-Id: Ic8793ffcbeb2411c9b81fb32acae062e8a1f40cc
CRs-Fixed: 3362828
setup to correct value by shifting intr_timer_thres_us
by 3 for interrupt timer to take less time.
Change-Id: I0eb799bf3a3443a7ca4a43512b7ec03444da81bc
CRs-Fixed: 3439468
HAL changes to populate agc gain, CFO, rx_start_ts, mcs_rate and
gi_type to CFR info.
Change-Id: I20b4ce1b8c065349106cd999054ff08c7f3521ec
CRs-Fixed: 3453631
Received window ppdu are dropped in work queue context as it doesn't
have ppdu timestamp. Added fix to populate ppdu timestamp.
Change-Id: I3276284351f27ae2e8bfb787aa96fb031e4025ac
CRs-Fixed: 3439473
1.Enable undecoded metadata capture feature for york radio.
2.Added support to extract and handle Phyrx abort request and reason
for york target.
Change-Id: Iae42c9f1bbce63d28983f87b3282264c6a4230cc
CRs-Fixed: 3432389
Add srng pointer register writing history, it is helpful
for debugging srng HP/TP update issue from host side.
(1) if host faced UMAC source ring, record the HP value and timestamp
when host write the register.
(2) if host faced UMAC destination ring, record the TP value and
timestamp when host write the register.
Change-Id: Ib98e48e1d32defb0d8b30b854b5b0c23691cca59
CRs-Fixed: 3427908
Add generic HAL APIs changes for Rhine architecture under
hal/wifi3.0/rh/ which are generic across Rhine chipsets.
Add wcn6450 specific HAL API changes under hal/wifi3.0/wcn6450.
Change-Id: I0964e0f610faa402c00fb68e4c6e901a92f6d7a7
CRs-Fixed: 3383304
