Query final values of session params like stage,
pipe and quality mode from FW and check if they
are the same intended values as configured by
the driver.
Change-Id: I1a504401a599860ab971e34e1e184e67631d6120
Signed-off-by: Chandrakant I Viraktamath <civirakt@codeaurora.org>
add support for HFI_PROP_MAX_NUM_REORDER_FRAMES.
add ctrl for this metadata for avc and hevc.
Change-Id: I9a7b95f130e58f810255aff23e9b605304841072
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Decoder is not supposed to support VIDIOC_ENCODER_CMD.
Encoder is not supposed to support VIDIOC_DECODER_CMD.
To do the same define separate ioctl ops for encoder and decoder
and remove unsupported ops.
Fixes: v4l2-compliance:
testEncoder(VIDIOC_(TRY_)ENCODER_CMD) on decoder.
testDecoder(VIDIOC_(TRY_)DECODER_CMD) on encoder.
Change-Id: I1560bd2f64c5df1e4b4f125d5b6d542eb9eb42e3
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Any video device which supports capture multiplanar buf type
should implement VIDIOC_TRY_FMT.
Fixes: v4l2-compliance: testTryFormats (VIDIOC_TRY_FMT).
Change-Id: Id7ec171115c9374c6173fcf74a609382c3acf2d0
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
- Added change to print buffer statistics like total and avg
etb, ebd, ftb, fbd counts, client set fps, actual fps,
bitrate values in 1 sec window and these stats currently
configured to print at every 1sec boundary.
- Convert meta buffer prints to low level logs.
Change-Id: I1c93eea90fbd5460eb51bbf133c513157003d51e
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Migrate to threaded IRQ from workqueue based
IRQ handling.
Change-Id: I5cf2ecaa6d9b8d67698bbaf41e8d5ff77249ab1c
Signed-off-by: Priyanka Gujjula <pgujjula@codeaurora.org>
Cap chroma qp offset value other than -12 as 0.
Change-Id: I0ca9c4844ab835a9365e695f38deff90768191aa
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Enumerate supported color formats based on preference.
Compressed format should be populated first, then linear formats.
Change-Id: I82ebd9b9386098575c257b193be37e07ab476d9a
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Ignore input port or output port streamoff if corresponding port is already
streamed off.
Change-Id: I708126b24758ee0f76bc2646527d1baee59e5178
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Sequence change property would configure firmware to generate psc at every
key frame. This property is configured based on low latency settings from
the client.
For cases, when client sets low latency from 1 to 0, the hardware would
continue to run in direct mode (low latency mode). Since the sequence
change property gets disabled, there would not be psc from firmware to
change the mode to 2 stage. Hence the sequence change property to be reset
only during psc handling.
Change-Id: Ie8e17e44c921f036763f6f390397d4d812120e23
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Decoder base cycle requirement of B frames has increased to 80.
Also, updated cycle count requirement for Encoder HIER B usecase.
Pulled from CL: 3302650.
Change-Id: I0f56166b7261e161630feeb8793473491dacccd7
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
During power_collapse & core_deinit sequence, always flush debug
queue irrespective of firmware logmask, to get more info about
failure.
Change-Id: I4ef328d27a77eb0807df6dc33fe0b2b92bf1feda
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Added change to avoid unnecessary list iteration during
msm_memory_free also added logic to catch double free
request.
Change-Id: Ie3fb8019fd039e95ea75ba8f3fbd266af515e5cd
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Track dmabuf refcount during dma_buf_get() and dma_buf_put().
So if any dmabuf present with non-zero refcount during close,
then i.e a dmabuf leak. So during session close print error
and call dma_buf_put_refcount_completely() api to recursively
reduce the count to zero and will call dma_buf_put() to avoid
dmabuf leak from video driver side.
Change-Id: I2028c18ca067977eac3cdf0ce7d6cc4200739408
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Add support to dump all queues(cmd, msg, dbg) as part
of handle_system_error using devcoredump framework.
Change-Id: Ia1b011a29e6bc657eb002dbba09deab62dc0b2b2
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Include errno.h explicitly and fix the order of
includes
Test:
compile on Android for arm64
compile off-target on host-linux for x86_64
Change-Id: I77e2469f576369d4dcea672f40413ec21ff7f3f9
Signed-off-by: Praveen Chavan <pchavan@codeaurora.org>
- make B and P frame QP controls as dynamic.
- enable I/P/B QP to fw as and when these
controls are set to the driver.
- remove HEIC qp support.
Change-Id: I7f45ab0bda75df8128bbbdfcebe66c2cae208b06
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
1. Calculate framerate based on buffer timestamp
2. If framerate changed and stable for 2 frames,
update it to firmware and in driver internally.
Change-Id: I7feda86dec8fcfc1dff6defac8c15a97c1b8393e
Signed-off-by: Priyanka Gujjula <pgujjula@codeaurora.org>
- Maintain free & busy pool to track buffers separately
- track double-free cases during msm_memory_free()
- track memory leak, by checking busy pool buffer count.
it is expected to be zero at the end of a session.
- maintain common api's to init, alloc, free, destroy
for all below buffer types.
- struct msm_vidc_buffer
- struct msm_vidc_alloc
- struct msm_vidc_map
- struct msm_vidc_timestamp.
Change-Id: Ib8655047c3883ea6601344661058d7a629ffd5bd
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Refine log level checking, to avoid some logs are
always printed if multiple level specified.
Change-Id: I151a5b8cce8d234d6d22450c43cf50d3b0065286
Signed-off-by: Qiwei Liu <qiweil@codeaurora.org>
Add support to dump video FW region during FW crash
using devcoredump helpers.
Change-Id: I64c47160f04644223f4e831c35f7a059d38f7d83
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Client can choose to run an encode session to acheive maximum
performance rather than maximum quality.
Add the handling to configure video core accordingly for the
configured video session.
Such configuration is only applicable for non-realtime session.
Change-Id: Ife290b377c844e5b1d3be93b2509c787f8e05c59
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Amend power on and off sequences for iris2 video hardware.
Change-Id: Icada0b95ba5990a6911803ee9fa650a296c357db
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
modify scanlines alignment for linear rgba color
format to 32.
Change-Id: Ide64322bc872bfda64d8f48474ef2d37a4f314b7
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Enable HFI_PROP_SECURE when secure session is enabled
in encoder. Same behaviour as Decoder.
Change-Id: I5edfe3d735fda8edea9e491ae17546945b4431a1
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
- To determine if session is admissible, check only the
decoder input width/height and encoder crop width/height.
- Update session MBPF Calculations.
- Amend work mode setting to consider decoder input width,
height and GOP size.
Change-Id: If4053c222de2a55ad5b85a8ab96c12c47b145aa3
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
Priority level was not determined at few sequences.
Determine the priority level and set to firmware, if
there is a change in driver and firmware priority.
Change-Id: I97861fd4ce8cfb7cf828a8da9a5ce8ba900280ef
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Currently driver prints hex values for codec type, pixel
format and port number. So added change to print strings
instead of hex values.
Removed unnecessary logs to avoid overlogging timeout
issues.
Change-Id: Ia44401990797dc20eae0a35631e9ed6a0b094c20
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
- misc fix for setting frame qp, min qp, max qp.
- seperate LEVEL database entry for encoder and
decoder as max level supported by encoder is 6_0,
but decoder supports upto 6_2.
Change-Id: Ia0a0a717e73e55a8b6933421e3eb55c3831524b2
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Currently session_error check is scattered at multiple places,
So check for session error at ioctl entry point itself(for set
type controls only).
Cleanup &inst->response_works.list as part of session close to
avoid leaks and remove unused variables from inst struct.
Change-Id: I349ec845cc71814b33a94ac07c7628304ddae564
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
qbuf will be deferred on all ports before streamon,
So explicitly queue pending buffers at the time of
streamon.
Change-Id: I673a14f0d43563184aac887f5f23b63ed13d59df
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
