It is observed that in some corner cases msdu count received
in montior destination ring descriptor is unreliable as a
result some of the link descriptor and associated monitor buf
descs are not returned. This change return such missing link/buf
descriptors and free associated buffers.
Change-Id: Iaad476b8e7a0372122981fd29c1f6e4685137817
CRs-Fixed: 3483157
In the monitor mode case if some entry status entries are
not received then after the next monitor interface up host tries
to process pending old destination ring entries. As host drops
1 destination entry after processing 16 status entries if the entry
is not present in the status ring. which in case there is a high
number of old entries in the destination ring will result in the
destination ring getting full.
To fix the issue force flush monitor destination ring
during vdev delete.
Change-Id: Ie23a57add7b5bd372ab66f801e29e55cfacb5d4d
CRs-Fixed: 3411943
Use monitor pkt tlvs size and monitor buffer size
instead of data pkt tlv size and data pkt buffer size.
Change-Id: I3099f6526aa11b353c8a5178de450d48f141a461
CRs-Fixed: 3406962
Move cfr monitor filter cdp func ptr to cdp mon ops structure.
cfr monitor filter cdp function is different for 1.0 and 2.0
hence moving the func ptr to mon ops structure ensures that
func ptr is initialized appropriately.
Change-Id: I82b9c85e96f2f219521ae6ed908ade120081c748
CRs-Fixed: 3428791
Move smart monitor cdp func ptrs to cdp mon ops structure.
Smart monitor cdp functions are different for 1.0 and 2.0
hence moving the func ptrs to mon ops structure ensures that
func ptrs are initialized appropriately.
Change-Id: Ic827b44f36d76349f397e5b72dec0a127f90aa7a
CRs-Fixed: 3428778
Initial changes for York scan radio bringup in monitor mode.
Update monitor filter settings.
Change-Id: Ib9468f11b71d0439d0bd63526f64f454ed6b5b4d
CRs-Fixed: 3421412
For beryllium target in monitor mode host only subscribe
to MSDU end and MPDU start tlvs, but during monitor mode
up as part of monitor filter reset host is subscribing to
all the tlvs.
To fix the issue only subscribe to MSDU end and MPDU start tlvs
on target basis
Change-Id: I1599559b1af0b5121a7c361db403da857988cc01
CRs-Fixed: 3429044
Currently for the monitor status ring history,
the event type is not being logged.
Fix the event type logging in the monitor status
ring history.
Change-Id: I43f07bf9a4232a203b7a996db6038a081249ffc9
CRs-Fixed: 3425325
Add support to enable/disable MLO Link Peer stats through
ini and cfg80211tool enable_ol stats command
Change-Id: Id1229a149befa416d060e1b07eee150e6b295abf
CRs-Fixed: 3397721
The pointer to next TLV in status buffer is considered
as valid, only if atleast the TLV header size is available
within the status buffer.
Change-Id: Ic222bfab4790853ee012de4b0a860ab037972ff5
CRs-Fixed: 3378058
The kernel-doc script identified a large number of documentation
issues in dp/wifi3.0/monitor, so fix those issues. In addition,
there are a number of instances where public functions have their
implementation documented instead of having their interface
documented, so move that documentation.
Change-Id: I27e14544ef88193bbfe6ee409fe58c59d6b5bea2
CRs-Fixed: 3373167
Currently for jumbo RX monitor MPDU, it will spread across multiple
RX buffers(N). host set length 112 bytes for (N-1) skbs(not include
the last skb), while the expected length should be (2048 - 400
- 112) = 1536 bytes for them, this lead to last skb length
calculation incorrectly, which will be total MPDU length -
112 * (N - 1), this will be over boundary of skb buffer room
easily.
Set length 1536 bytes for (N-1) skbs to fix it.
Change-Id: I4e73673887d5d8197cf64bed5da34a3751df1e33
CRs-Fixed: 3381528
remove unused var and declarations in
dp/wifi3.0/monitor/1.0/dp_rx_mon_status_1.0.c
CRs-Fixed: 3284798
Change-Id: Iea3f8e2213fef9d10fe20c90c2ac0017f7d17692
remove unused var and declarations in
dp/wifi3.0/monitor/1.0/dp_rx_mon_dest_1.0.c
CRs-Fixed: 3284798
Change-Id: Ibfeaca928fe43e6f0cc5b52a2114708810c09805
remove unused var and declaration in
dp/wifi3.0/monitor/1.0/dp_mon_filter_1.0.c
CRs-Fixed: 3284798
Change-Id: I289aac6ae32c22539c98d02673b9af9a48d46192
IOMMU map and unmap RX buffers into LPASS SMMU context
bank for LPASS to access RX buffers in direct link
usecases.
Change-Id: Ie72a008309e3abdf3fbc7198bb5d3af5e9497180
CRs-Fixed: 3356568
Currently, in case of station+monitor mode on KIWI target,
we are not attempting to drop the entries received in the
monitor destination ring, when no channel has been
configured for the monitor interface. This leads to the
monitor destination ring full condition and an eventual
backpressure on the ring.
Fix this issue, by dropping the entries in the monitor
destination ring, which have been received before the
monitor channel has been configured.
Change-Id: Ic9c432b438d0a5dce2d2bb38053c31ce508c27f5
CRs-Fixed: 3332327
As part of mac address filtering feature for scan radio in special
vap mode, on addition of first NAC entry or deletion of last NAC entry
the corresponding monitor filter needs to be set or reset
Add change to support ops callback function required to set or reset
monitor filter settings are runtime.
Change-Id: I916c0b246bb180363f1a181ef49618af763b261d
CRs-Fixed: 3317409
Currently the monitor mode processing assumes the
rx pkt tlv to be consisting of RX_PACKET_HEADER tlv.
This assumption is incorrect in case of sta+monitor
mode, where the RX_PACKET_HDR tlv has not been subscribed.
Due to the above incorrect assumption, a certain portion
of the actual payload is being discarded, when the
rx_pkt_hdr tlvs are stripped off from the received buffer.
To mitigate this issue, use the rx_pkt_tlv length based
on the tlvs which are enabled, and configured to the
rxdma for reception.
Change-Id: I8f29db85bbd50316e3c2073ae9a2e79fd724be05
CRs-Fixed: 3318038
Currently the monitor mode filter settings are set
for both the PMAC. Hence it is possible that the
non-monitor PMAC (the PMAC on which monitor vdev
is not running), can receive packets and forward them
to the monitor destination ring.
The above scenario will lead to a ppdu_id mismatch
when reaping the monitor status ring and comparing
the ppdu_id in status ring with the one in monitor
destination ring, since monitor status ring will
have ppdu_id from the PMAC on which monitor vdev is
running, whereas monitor destination ring will have
packets from both the PMAC.
In order to mitigate the above issue, detect the
packets in the monitor destination ring, which are
not from the PMAC where monitor vdev is running, and
drop them.
Change-Id: I32392ceeadffd9cb7a4dd76336004a9dcbb99404
CRs-Fixed: 3318036
Add control frame stats accounting support.
Accumulate both per peer BAR and NDPA counts in Tx and Rx per PPDU stats
path. Accumulate per peer RTS success and failure count only in per PPDU
Tx stats path.
Change-Id: I78fb3546cd831559e208a7330feb2eb67b9a28de
CRs-Fixed: 3313435
Before we are updating RSSI params directly into mon_rx_status
this structure will reset every PPDU this breaks iwconfig,
wlanconfig and monitor packet RSSI values.
Fix added to storing the values in the mon_pdev.
Change-Id: I9f8fa776c65cbad84fac5e8c2f65b3fce1386e20
CRs-Fixed: 3276503
When the length of a 802.11 frame is more than the
size of the posted receive buffers, it is split across
multiple buffers, which have to be accumulated before
submitting to network stack.
For all-but-last buffer which are used for the above
mentioned large 802.11 frame, the MSDU_CONTINUATION
flag will be set indicating that remaining data of the
same msdu has been DMA'ed to the next buffer.
The current implementation in monitor-1.0 works for
legacy chipsets, where MSDU_START tlv is available and
hence the aforementioned information was available in
all the buffers containing the large 802.11 frame.
For kiwi target, there is no MSDU_START tlv, and hence
a lot of information eg: mpdu_len_err, decap_format and
l2_hdr_offset are not available in the buffers where the
msdu_continuation flag is set. This leads to an attempt
of mpdu_restitch using incorrect data from tlv, and hence
the mpdu_restitch fails for such large 802.11 frame.
Fix this issue for kiwi target, by gathering all these
information which are available in the last buffer and
are used to process/accumulate the entire 802.11 frame.
Change-Id: I1c4fc9fd574c1c5fabc845407aa6f2d990c60906
CRs-Fixed: 3261494
Compilation is failing when Monitor support is disabled
Moved monitor related API and structure to monitor header files.
CRs-Fixed: 3257872
Change-Id: Ie1b3dc16b38c88bfd73fc89aaa395d4b57a61e5c
Update RSSI specific parameter from beryllium
specific path to common path as part of
extending feature for lithium also.
RSSI calibration parameters are received as part
of WMI event from FW, update these parameters to
monitor pdev via CDP interface.
Change-Id: I4e35d873db6d1ad03d86694a8d36decffe409a0e
CRs-Fixed: 3231120
Changes to configure the rxdma ring for CFR. Move existing
API of legacy chipsets to dp_mon_1.0 and add Waikiki
specific API in dp_mon_2.0.
CRs-Fixed: 3231265
Change-Id: Id7276bb7bb7f58461c7e10a0695c3e78a1c39b0c
Add history to track the monitor status buffer entry.
Currently the below 3 events are added:
- Monitor status buffer reap from ring
- Buffer enqueue to a local list
- Buffer dequeue from local list for parsing.
Change-Id: I7c17070ffee25a9a9dc4af0b48bfa8808e18887d
CRs-Fixed: 3225647
Split tx and rx monitor buffer add function so that
they can be indivudually called when lite monitor mode is enabled.
Change-Id: I9996d0261f1912237bd6fa45058d410698b9fa28
CRs-Fixed: 3206170
Since more than one components depend on reap timer of
monitor status ring, add bitmap to record the trigger
sources of the timer and refine the APIs/calling functions
accordingly.
With this change:
When a new start request comes, if the source is
CDP_MON_REAP_SOURCE_ANY, skip bit set, and start timer
if any bit has been set in the bitmap; while for the
other sources, set the bit and start timer if the bitmap
is empty before that.
When a new stop request comes, if the source is
CDP_MON_REAP_SOURCE_ANY, skip bit clear, and stop timer
if any bit has been set in the bitmap; while for the
other sources, clear the bit and stop timer if the bitmap
is empty after that.
Change-Id: Idaa7837c4b93b247ff2236aa5072d309fa9548c2
CRs-Fixed: 3190347
Module unload is getting trigered in between
Vap restart due to channel switch
while waiting in monitor module unload for 500ms VAPs are coming up.
And after wait, during monitor pdev deinit
HOST start receiving stats indication.
Monitor pdev is getting dettached while processing stats indication.
Move register/derester of stats handler to intr ops.
Change-Id: I821c144f54bfe78c567039ab57fcf1eac7cb4f46
CRs-Fixed: 3192980
Currently, for kiwi, the tlv parsing from monitor
status buffer stops when it encounters MPDU_START
tlv. This happens since the return value after the
parsing of MPDU_START is not one amongst the allowed
return values for the tlv parsing to be continued.
Add MPDU_START tlv parsing return value to the allowed
return values, in order to continue the parsing of tlvs
from monitor status buffers.
Change-Id: I51cfecb7df8d8055a37e1b898419ec322dad63db
CRs-Fixed: 3203708
Add WAR to skip multiple ring entries in case if DMA is not
done for more than one entry in monitor status ring
CRs-Fixed: 3206692
Change-Id: Id24deb18d173e521efda38716244f375a409d7f5
calculate rssi_comb and rssi per chain values using
parameters received from the fw.
Change-Id: Ide56549c7d7ee9bde609dc6764013d509f7ccac0
CRs-Fixed: 3157484
Add function to setup/reset lite monitor filters
whenever lite monitor mode is enabled/disabled
respectively through cmd line.
Also add function to configure rx header tlv dma length.
Change-Id: Ia5d8bc36e1d033b3e15737bb6b9854f6a7cdd5df
CRs-Fixed: 3143570
With new configuration changes for enable_peer_extended stats, update
code to peer_extended_stats naming for clean codebase.
Change-Id: I97a7ee331042232098382683fefebd05e6b099c3
CRs-Fixed: 3149920
