For legacy codecs, the line buffers are calculated by assuming
OPB size (worst-case). However, for AV1D, the line buffer size
can be smaller than required if OPB is assumed. Hence, add an
exception for AV1D.
Change-Id: I25b6ae630994e8c4c216499c10d7c217ad550d2b
Signed-off-by: Mihir Ganu <quic_mganu@quicinc.com>
When client called streamoff on capture port, driver needs
to flush out pending last flag buffers, if any, to avoid
session errors.
Change-Id: I733ba1a39374f38a1d63a876fb4d2fc06aa6daf7
Signed-off-by: Maheshwar Ajja <quic_majja@quicinc.com>
AV1 bitstream frames can have different resolutions than
sequence resolutions. Subscribe to BITSTREAM_RESOLUTION and
CROP_OFFSETS metadatas and exopose them to clients so that
clients can receive per-frame resolution and crop.
Change-Id: I7c0503f25ddde201979d13ff18028681f685d649
Signed-off-by: Mihir Ganu <quic_mganu@quicinc.com>
Currently driver doesn't support CMD_STOP in open state.
But according to v4l2 std, the call to VIDIOC_DECODER/ENCODER_CMD()
should not fail even if any of the queues is not streaming,
but at the same time it will not initiate the Drain sequence.
So with this fix, not rejecting CMD_STOP in open state but
at the same time not initiating drain sequence.
Fixes: v4l2-compliance :
VIDIOC_(TRY_)DECODER_CMD on decoder.
VIDIOC_(TRY_)ENCODER_CMD on encoder.
Change-Id: Ie94288cca88009a8a945bd7bca70d04239a4678c
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Decoder needs to support VIDIOC_TRY_DECODER_CMD and
Encoder needs to be support VIDIOC_TRY_ENCODER_CMD.
Partially Fixes: V4l2-complience:
testDecoder(VIDIOC_(TRY)_DECODER_CMD) for decoder.
testEncoder(VIDIOC_(TRY)_ENCODER_CMD) for encoder.
Change-Id: Ia68587412ed316f0c871397da83d6c56665cfbb5
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
- Do not clear V4L2_FL_USES_V4L2_FH flag because this
flag indicates that file->private_data points to
&struct v4l2_fh.
- Initialize v4l2 ctrl handler with driver ctrl handler.
- Add ctrl ops for g_volatile_ctrl to return updated
value of volatile ctrls from driver.
Fixes: v4l2-compliance:
testPrio (VIDIOC_G/S_PRIORITY).
testQueryControls (VIDIOC_QUERYCTRL).
Change-Id: Ibe4b6fa67d2c02a5afeb627f2060e4761c5ef717
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Add support to set AV1 operating point to firmware.
Change-Id: If0f31c2bf04cb6d4f783264fb3ce706b1bf98261
Signed-off-by: Mihir Ganu <quic_mganu@quicinc.com>
Add support to set AV1 decoder bitstream format
(low-overhead or Annex-B).
Change-Id: Ie36eefe0488bf33af91802c0bee51b3fec2024ac
Signed-off-by: Mihir Ganu <quic_mganu@quicinc.com>
Reset video_cc_mvs0_clk_src value to resolve MMRM high video
clock projection issue.
Change-Id: I0c549d7537a82792e9de708c96c265f0dce5908d
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
The clock video_cc_mvs0_clk_src will be automatically prepared and
unprepared when video core cpu clock is prepared and unprepared. So
skip explicit prepare/unprepare video_cc_mvs0_clk_src from video driver.
Change-Id: Ibe41b0b4ecfce27959c29d8024c91af8c1162aa7
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Following changes are done in power collapse sequence
1. AXI2AHB bridge is reset during power collapse.
2. controller regulator is disabled after disabling the
clocks.
3. disable core clock before axi clock.
Change-Id: I8be672728f349620deea22950597ca7766078697
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
New dma_buf_vmap api takes dma_buf_map struct as argument,
instead of kvaddr.
Change-Id: I2843a28b2c0c2de2d9cd1bfa96fb1a86ffba6059
Signed-off-by: Chinmay Sawarkar <quic_chinmays@quicinc.com>
Use correct macros and values for fps calculations
in kalama platform files.
Change-Id: Ib58903228032b1107363a98ce21b3bcb95aca0f5
Signed-off-by: Mihir Ganu <quic_mganu@quicinc.com>
Add AV1 codec, profile and level defintions and controls in UAPI.
Add these controls as private controls in video driver.
Change-Id: I58edec2d7fabceaa405708c99a75997c9f454022
Signed-off-by: Mahesh Kumar Sharma <quic_smahesh@quicinc.com>
Add the required config and platform files to enable
kalama platform with iris3 VPU.
Change-Id: Ia65d2212b946d0d37fc99e30e25fe408882bdec3
Signed-off-by: Mihir Ganu <quic_mganu@quicinc.com>
Fix compilation errors on parrot which has a
different lunch combo other than taro/diwali.
Change-Id: I35aee69bc8e18d50395a01b97d282c21e75da193
Signed-off-by: Priyanka Gujjula <quic_pgujjula@quicinc.com>
Publish h264 decode level value with in the
supported level.
Change-Id: Id1cecdfda0336eec3fdba7ad994d2381351065c5
Signed-off-by: Priyanka Gujjula <quic_pgujjula@quicinc.com>
dma_buf_vmap() api changed from kernel version 5.15 and hence
check kernel version to use the updated api.
Change-Id: I05b7c72199cedfe9c33a8888fffb5e38da875f7e
Signed-off-by: Maheshwar Ajja <majja@quicinc.com>
HLOS doesnot have access to raw region. Instead,
read from sw_range4 region which are sense
registers for raw region.
Change-Id: I662266b6557756d9bf6ef687f81b7869a792e7f7
Signed-off-by: Priyanka Gujjula <quic_pgujjula@quicinc.com>
Max mbps has to be calculated using max fps.
Change-Id: Ic0e3b337c7327e9a9bd4ada6b2008ccb6fa1be04
Signed-off-by: Priyanka Gujjula <quic_pgujjula@quicinc.com>
Add instance data for v1 and v2 sku's.
Change-Id: I13a03ebb55d2ccb9044ac667054fc3aadbd2977f
Signed-off-by: Priyanka Gujjula <quic_pgujjula@quicinc.com>
Reject any unknown buffer received from fw.
Change-Id: Icfc639cce364566a5479f5c12e13f7cb4fc06b00
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
check max mbpf as well while allowing
the real time session.
Change-Id: I1091582a02e01a4daa9c58ec5b50400b7d856610
Signed-off-by: Manikanta Kanamarlapudi <kmanikan@codeaurora.org>
1.) New dma_buf_vmap() returns SUCCESS or FAIL unlike legacy dma_buf_vmap()
which return type is vmap address. dma_buf_vmap() takes two arguments now.
Now it returns vmap address in pointer passed as second argument.
2.) If defined, use V4L2_CTRL_CLASS_CODEC else use V4L2_CTRL_CLASS_MPEG.
3.) iommu_dma_enable_best_fit_algo is commented temporary.
4.) remove subsystem_resart.h
Change-Id: I73c6a840fa6028f021debff33b88178ac74dcef9
Signed-off-by: Mahesh Kumar Sharma <smahesh@codeaurora.org>
