qcacld-2.0 to qcacmn propagation
Add support to include only selective IEs in probe requests in
order to improve user's privacy.
Change-Id: I59cf4181f60f5b4cd87a32fbcf29160d87ca59c8
CRs-Fixed: 1105495
FW implementation is updated to add more fields in chan info event.
Update host implementation to extract these fields.
Change-Id: I4935f3aa1c2e87d27a13a29651db8d8835cb4f91
CRs-Fixed: 2090787
Enable WMI PDEV parameters to configure per TID AMPDU and AMSDU in TLV implementation
Change-Id: I12982e78f880bf9bf8858aaa99aa416d7f775c17
CRs-Fixed:2089935
Add a field ldpc_rx_enabled to vdev start parameters so that
this information can be propagated from the upper layers to
WMI and further to firmware.
Change-Id: I25fd148f77d86eb646a0e40fef6ac99c4fbcdf22
CRs-Fixed: 2023893
qcacld-2.0 to qcacmn propagation
Randomize probe request's source address and sequence number to
improve user's privacy.
Change-Id: I265f15476f1a23a268f159a44b6a3e4243fb9068
CRs-Fixed: 1105081
kmsg is flooded with excessive logs from wmi_control_rx.
Fix is to change log level to debug.
Change-Id: I327463387a5dac318ecc0ad7e773006cfc09b42a
CRs-Fixed: 2073718
Use sme session id in send_set_ric_req_cmd_tlv() as vdev_id, otherwise
it causes target assert when WMI_ROAM_SET_RIC_REQUEST_CMDID is sent to
firmware.
CRs-Fixed: 2037815
Change-Id: Ic3cb08fc62b3ca006abb78ce3b5d5fa028935783
Add support for rssi based assoc rejection from a bssid and
Try to connect to this bssid only after time interval indicated in
Assoc reject or when rssi has improved by margin indicated in Assoc
reject.
On connection send OCE rssi reject BSSID list to firmware so that
firmware will avoid connecting to these BSSID until RSSI improve or
delta interval has elapsed.
Change-Id: Ic14f85894a4a2f47bcdde9ce977c7b92aeaf8fce
CRs-Fixed: 2076654
Remove redundant header file inclusion from wmi layer by abstracting
the dependency with in WMI layer.
Change-Id: Ie113b69006a960b70d781134775bc44c7508fc4c
CRs-Fixed: 2023825
Fix the number of buffers being passed in ROAM_INVOKE command
to the firmware. Fill it only if there is a valid beacon or
probe response being sent to the firmware
Change-Id: I0f569b847091bb9eb92a92de949c90ace0ab51fe
CRs-Fixed: 2077075
Fix implicit conversion from enumeration type 'A_STATUS' to different
enumeration type 'QDF_STATUS'
Fix implicit conversion from enumeration type 'QDF_STATUS' to different
enumeration type 'A_STATUS'
Fix implicit conversion from enumeration type 'WMI_START_EVENT_PARAM' to
different enumeration type 'WMI_HOST_START_EVENT_PARAM'
Change-Id: I1d8c7781baaaf6461273298e8eb82ff841d3c8fc
CRs-Fixed: 2063149
HT cap bit map is different for tlv and non-tlv based firmware.
Convert target cap to host cap bitmap to abstract out the differences.
Change-Id: Ia803efa3a895c7faa159d8051277d2a926b365a5
Populate tx params tlv that includes information related to power,
chainmask, bandwidth mask, preamble type, frame type etc to the mgmt
and offchan tx WMI fixed param
Currently, we send the command with TX params valid set to zero always
and hence target does not look for the TX param TLV. This change
implements API to populate TX params TLV that facilitates configuration
of parameters per TX frame be it data or management frame
If the TX params valid is set to false, target decides the values
to use for each of the mentioned TX parameters
Change-Id: I90a1b5e1c9bf0a54a907876ed3629c2d627b3c98
CRs-Fixed: 2070454
The length of buffer used to send wmi roam scan filter cmd is not
properly calculated and thus the length is less than the actual data
to be copied.
Fix it by properly calculating the length of the buffer.
Change-Id: I6a3baa5ca5560d2d04f9bd41a709a37abc1b95a9
CRs-Fixed: 2072057
TX management retries is configured by host through pdev param sent
to the target. Populate pdev param enum to support configuration
of management retries during TX
Change-Id: I3f8b976ef089a0455481923ce18147f167733b14
CRs-Fixed: 2073391
In worst case, different pdevs can be in different countries and
hence different reg-domains. Also there could be differences due
to front-haul and back-haul.
Change-Id: Ib9e998b5f7de4e42a1736d07e9e5602d8506e7b6
CRs-Fixed: 2048784
Currently, for world regd and some other regds where conformance test
limit is NO_CTL, host is sending invalid CTL info to fw instead of
NO_CTL (0xff) due to type conversion issues.
To fix this, use proper unsigned type for CTL info.
Change-Id: I0407d30c6cd6f7f485d767c97bc5381c9c731440
CRs-Fixed: 2056847
implicit conversion from enumeration type 'A_STATUS' to different enumeration type 'QDF_STATUS'
implicit conversion from enumeration type 'QDF_STATUS' to different enumeration type 'A_STATUS'
CRs-Fixed: 2063344
Change-Id: Id3613d0b7fca58c3d94c5af59838b0bff3ef26de
Add host support for detecting SOC power collapse failures in FW and
communicating the same to framework.
Change-Id: Icee39c896802c4d7136e0b8ef442a33feeb4799c
CRs-Fixed: 2016580
WMI_ROAM_INVOKE_FLAG_REPORT_FAILURE flag is not set correctly,
bit(1) in flags represents WMI_ROAM_INVOKE_FLAG_REPORT_FAILURE,
fix the same.
Change-Id: I8311b1e6999f3c741ec8be87536a73f3e7e3cb93
CRs-Fixed: 2044160
Set the WMI_ROAM_INVOKE_FLAG_REPORT_FAILURE flag in the
WMI_ROAM_INVOKE_CMDID requesting the firmware to always
report the failure to the host
Change-Id: Ie1a10ba774cf43e791b48a2f675225c74e94b958
CRs-Fixed: 2023893
Remove unwanted prints from the dirver and also change tha log levels
from some of the prints which could be useful in debug pruposes only.
Change-Id: I2b4e0c94fcf1571b332fc005b34bc4b7bcb4b7c5
Firmware now supports PMK caching in addition to OKC
(Opportunistic Key Caching). Use additional bit flags to enable
PMK caching in PMK configuration in roam offload scan request.
CRs-Fixed: 2004963
Change-Id: I536a4d45d5d915ab02dc13db6124a1ce8949fe48
The tx_iv flag of wapi has been changed
from an array of type u32 to array of type u8
this change adds support for it .
Change-Id: Ia0e57e25c151e7f7f232cf8dc07d59d5a19b47e0
Firmware expects pdev suspend to be sent per pdev. Fix odev_suspend
command to use proper pdev_id.
Change-Id: I17489bbfc55c0c49371a857148af80f66b342378
CRs-Fixed: 2062400
Target stop and (re)start will free htc_handle and re-negotiate endpoint
ids. Change wmi_unified_get_pdev_handle to update htc_handle and
endpoint data in wmi_handle to reflect latest values.
Change-Id: I2385a73bd1d61a6f36db8bdaca4a22115f6bf68c
CRs-Fixed: 2062439
Add min_candidate_rssi to wmi_per_roam_config. This is added to
provide the configured min candidate AP threshold to fw to be used
for PER(Packet Error Rate) based roaming.
Change-Id: I6e0ae1ebe578bcd6d858e1d5252dead6e849d54a
CRs-Fixed: 2050039
There are two implementation of WMI beacon template wmi cmd.
Remove redundant code by converging WMI beacon template
cmd implementation.
Change-Id: Icc9e1f5326c3197a7994ed10ea1ef6386edc7efd
CRs-Fixed: 2061681
