At present, driver doesn't check the set mon channel parameters
for HT40-, driver always set HT40+ for 2G channel 5 at present
by command "iw dev wlan0 set 5 HT40-".
Fix by check secondary channel offset from set channel parameters.
Change-Id: Ia69f193c72e9e97a4d6988e86bcfd3727089452e
CRs-Fixed: 3019982
Currently, wmi_roam_stats_event_id data is extracted and
processing is also done in wma. This is not inline with component
model where target_if takes care of data extraction and handover
the extracted data to corresponding component(connection mgr in
this case). Add changes to support the same.
Change-Id: I5e336b01e1a2183e49b3e6eeb125c7c9fd0fd73c
CRs-Fixed: 3003125
When operating in 6GHz band, don't send the peer legacy rates as it can
cause a rate mismatch and eventually a crash.
Change-Id: Idda718daaa66aeb5a80ed036055317e64f8226a2
CRs-fixed: 3005578
For platforms that don't have IPA module, 4 RX rings can be
enabled to map to 4 RX threads. This Change is to implement a
feature flag to separate the number of threads used for
different platforms.
Change-Id: I23744ca6333f29667b0860f386dc9fc45f29abe4
CRs-Fixed: 3018613
In SAP mode, the get sta info vendor command gets called for both
connected and disconnected state. If peer client is connected then
driver returns the SAP power save parameters to the userspace.
If peer client is disconnected then driver returns -EINVAL status.
Userspace cannot differentiate using this error code whether driver
is not able to handle the vendor command or peer client is
disconnected.
So, if peer client is disconnected then return -ENXIO error code
instead of -EINVAL.
CRs-Fixed: 3014906
Change-Id: I3ce5cd53e79c3bfaeed6571ea28b28ce2dfe26b3
mscs_pkt_threshold - This ini specifies the Voice pkt count
threshold to Send the MSCS action frame to AP. To disable MSCS
feature in driver set mscs_pkt_threshold = 0 in ini file.
Change-Id: Ie1d8d3f3289d8f41a16f187bf9256b959019d998
CRs-Fixed: 3013686
The purpose of the multicast Domain Name System (mDNS) is to resolve
host names to IP addresses within small networks that do not include
a local name server.
It utilizes essentially the same programming interfaces, packet formats
and operating semantics as the unicast DNS, and the advantage is zero
configuration service while no need for central or global server.
Based on mDNS, the DNS-SD (Service Discovery) allows clients to discover
a named list of services by type in a specified domain using standard
DNS queries.
Here, we provide the ability to advertise the available services by
responding to mDNS queries.
Change-Id: Id2a0468d49237c21062cfd1988e34903658cdad9
CRs-Fixed: 3008549
When driver gets rrm request it tries to get country from beacon IE
and if country is not present in beacon IE it sets the current
country information from regulatory and does not sets the op class
which is not the right way.
If AP does not send country in beacon IE, driver should set
GLOBAL_OP_CLASS for rrm request.
Change-Id: I4797d03f38817ac580f3bfea08f1939dad4da5d1
CRs-Fixed: 2996921
NUD_FAILURE event is processed after wlan bus suspend is
successful. This results in disconnect active command, which
is triggered as part of honoring NUD failure, to timeout since
WMI commands to FW will be dropped at WMI level as target is
suspended.
Fix is to ignore NUD events received when wlan is suspended.
Change-Id: If348e2043013dcab9bd16f1cfa3f8de2f81db4dc
CRs-Fixed: 3016230
Currently, the WLM mode could be recovered after disconnection
or interface down/up about random MAC feature. Since some OEMs
have different mechanisms to config WLM mode on their framework
implementation and don't expect recovering the WLM mode.
So add logic to set default WLM mode when disconnection happens.
And add ini wlm_latency_reset_on_disconnect to differentiate
the implementation in driver. By default
wlm_latency_reset_on_disconnect is false.
Change-Id: Idcb3baf6ab8f0533eb01c28ff1c12513f9995946
CRs-Fixed: 3006875
Fixes in this change include:
- Add debug prints
- Don't disable roaming in case of MLO link connection
- Minor compilation fixes
Change-Id: I0aa9e8b2fd634b6dba1926796d95db997946aac3
CRs-fixed: 3013039
Add configuration support for broadcast TWT support and Rx control
frames to MultiBSS HE capabilities.
Change-Id: I2b3075a21c919c120e7a1ff674ac33fdd5d73801
CRs-Fixed: 2979513
In case if .set_power_mgmt command comes with ps disable,
then driver needs to teardown all existing twt sessions on
STA interface and if any TWT setup request command comes
after ps disable then also driver rejects the command.
Change-Id: Ib7c86fd257c52b9bac57124b744dc7a9e8405560
CRs-Fixed: 2997260
Currently addba response is not updated with ini configured rx aggregation
size.
This change is to reject peer addba request if rx aggr size is 1 and
for other sizes select min value of peer and configured sizes.
Change-Id: Ia375b1e031dfecf948429e0baea19faa8fe42ffa
CRs-Fixed: 2962314
Currently during SAE roaming, if the DUT exhaust SAE retries
(i.e. DUT doesn't receive SAE auth confirm/commit response even
after max retries), host driver stops retrying and cleans up the
internal counters/frame. But, the failure is not notified to firmware.
So, firmware may go out of sync. Therefore, Notify the failure to
firmware through WMA_ROAM_PRE_AUTH_STATUS in such cases. So that,
firmware can abort roaming.
Change-Id: Ic769dcabc15c1052f5d7d43f3ef754dd7b7c1f40
CRs-Fixed: 2981666
If there is single chain support then driver should disable
beamformer instead of enable
As part of fix, check the number of chains by intersecting the
firmware capability and ini config. If it is 1 then set
su_bformer, mu_bformer and num_soundingdim as 0
Change-Id: I84434c741cbf774f368657b2c57668f6e7b99991
CRs-Fixed: 3003257
Configure FW to prevent entering into power save during the
TWT suspend and resume when the STA role is testbed device.
Change-Id: If0d1d93076d60a3cd72e5c07f7e5b8519a039988
CRs-Fixed: 2995102
When TSPEC session is deleted, the access category of the data packets
should be downgraded to next lower AC. But this is not happening due to
acm mask is not getting updated when bss descriptor is NULL.
To fix this ssue, update acm mask from bss descriptor only when beacon
IEs are not present.
Also move qos related logic to LIM and bring missig changes which were
there before connection manager.
Change-Id: I9da80cf492b01762b4cc0a7b73271a0f5fe4b4a4
CRs-Fixed: 3011069
For 11a/g mcs 0, preamble:OFDM 0, nss 1x1:0, channel width:20M, 0,
mcs 0 rate:0.
so (((_pream)) | ((_nss) << 3) | ((_bw) << 5) | ((_rate) << 8)) is 0,
so wmi_rate_stats.rate is 0, rx_mpdu is set to 0.
Fix it by not setting rx_mpdu to 0 when rate is 0.
Change-Id: Ie12660480af42e26c2ea957b6576dbd395730522
CRs-Fixed: 3008693
Currently driver frees the radio stats memory from wma
in error cases, there is a possibility that if hdd gets
time out for the stats request, it tries to free the radio
stats memory and at the same time if wma receives invalid
stats from fw in that case wma also tries to free the radio
stats memory which may lead to double free.
To aoid above issue, do not free the radio stats memory from
wma, in error cases hdd will free this memory after it gets
time out.
Change-Id: I6f6073a1a8e0be1b87efce288b7567e8fc8d69b0
CRs-Fixed: 3013842
In LTE coex SAP restart scenario, currently SAP new channel is selected
base on 20M bandwidth, and channel bandwidth is determined after
channel frequency determined, if new channel bandwidth is greater than
20M, it is possible channel boundary fall in unsafe channel range,
because bonded channel is fixed with different bandwidth.
If select new primary channel with determined bandwidth, it would
violate MCC to SCC limitation if concurrency, to make it simple,
just shrink SAP bandwidth to 20M if check unsafe channel failed.
Change-Id: Id9bc5e6e807c0446138ca816bc3ada22443fe7a2
CRs-Fixed: 3005333
