This command is used to send OEM data binary blobs
from application/service to firmware.
Change-Id: Id806638bf8c53c65b32177969d965290da5701b9
CRs-Fixed: 2477337
Add WMI support for vdev delete all
peer request which will replace individual peer
delete of peers under a vdev during vdev down.
Change-Id: Ia41ae5fbf96a75d2a3e608564742d2a43e0ed2cc
CRs-Fixed: 2456858
Add changes to remove usage of void pointer for wmi_handle
Instead use an opaque pointer(set 2)
Change-Id: I06a89adaf15c6b398dbc901518aa83927b7ca16a
CRs-Fixed: 2479298
Add changes to remove usage of void pointer for wmi_handle
Instead use an opaque pointer(wmi_handle_t)
Change-Id: I7c6dce564f34352c75e0b9d0c90591de625f1959
CRs-Fixed: 2479299
Featurize PKTLOG cmd handle under feature flag FEATURE_PKTLOG
as part of CONFIG_MCL cleanup.
Change-Id: Iae8c7e7caad001d7d37a8e17c1eb892f96009066
CRs-Fixed: 2467198
Channel RF info contains metrics that signify the throughput
availability of all the supported channels. This information
is sent in as discrete TLVs (per channel) as part of the WMI
extended service ready event.
Each TLV contains the frequency, bandwidth represented and
the actual channel metric.
Add support to read the above-mentioned TLVs from the extended
service ready event
Change-Id: If947e179c1ca41466997cc48840a8d36b6236780
CRs-Fixed: 2441921
Convert host param id to target param id using arrays
instead of switch case. This enables removal of CONFIG_MCL
compile time macro and use specific macro
ENABLE_HOST_TO_TARGET_CONVERSION for conversions
Change-Id: I223141d47e92521e6600fc0e160ab2deef43d7d2
CRs-Fixed: 2418030
Send idle roam trigger monitor command to firmware based on
the SET SUSPEND mode command received from the user space.
The set suspend mode value sent will be used by firmware as
one of the parameters in determining if the device is in
idle state. When set suspend mode is 1, device is not in
idle state else the device is considered idle if idle state
data packet count, idle rssi, inactivity time criteria are met.
Add changes to send the idle trigger monitor value over the
wmi command WMI_IDLE_TRIGGER_MONITOR_CMDID.
Change-Id: I34632814a1e653fa87cfbab90c72ee1622dfd63c
CRs-Fixed: 2436222
Add support to get the various Coex data from the debugfs.
This commit adds the support to get the various coex data:
* COEX STATE
* COEX DPWB STATE
* COEX TDM STATE
* COEX IDRX STATE
* COEX ANTENNA SHARING STATE
The specific state information can be read via the debugfs.
Example to read the COEX STATE logging:
sm6150:/ # echo "1" > /d/wlan/mws_coex_status_info
sm6150:/ # cat /d/wlan/mws_coex_status_info
Reading for command MWS_COEX_STATE.
vdev_id = 0
coex_scheme_bitmap = 0
active_conflict_count = 0
potential_conflict_count = 0
chavd_group0_bitmap = 0
chavd_group1_bitmap = 0
chavd_group2_bitmap = 0
chavd_group3_bitmap = 0
Change-Id: I92272ad7edf44df22730ac0fa992d876840ba632
CRs-Fixed: 2413955
Add the necessary support for peer_extd2 stats in the WMI layer. The
stats contain rx_bytes, rx_err and rx_mpdus
Change-Id: I9f787e28a8e128471489c8f47ac03fef77dae930
CRs-Fixed: 2395636
Convert pdev and vdev param conversion array to pointers
and allocate them only if conversion is required.Use run-time
NULL check of pdev and vdev param pointers for conversion
and remove CONFIG_MCL compiler flag.
CRs-Fixed: 2393422
Change-Id: Ica1c81f5f3c3a4b7e31dcb70c63471898c36933d
There are multiple issues with the Link Layer Stats Unified API:
- struct ll_stats_clear_params and struct ll_stats_get_params both
incorrectly use the identifier "sta_id" to refer to a vdev_id.
- struct ll_stats_set_params has an unused "sta_id" field.
- Functions wmi_unified_process_ll_stats_clear_cmd() and
wmi_unified_process_ll_stats_get_cmd() pass the MAC address as a
separate parameter rather than adhering to the commonly used
unified signature: func(handle, param).
- Not all of the functions and data structures are correctly protected
by the WLAN_FEATURE_LINK_LAYER_STATS feature flag.
Refine the Link Layer Stats Unified API to address these issues.
This is co-dependent with Ifd7c8de2358121dae4752525ff57021a32be85d3
("qcacld-3.0: Use the refined Link Layer Stats Unified API").
Change-Id: Ifdc1fada55a559f3b3d0837ec20cceb653c45c40
CRs-Fixed: 2409293
In son_ol_send_null(), check for the return value of
GET_WMI_HDL_FROM_PSOC() before using it.
Also, pass argument of type wmi_unified_t in calls
to wmi_unified_stats_request_send().
Change-Id: Idfedae2fcbde6d18b1829adefcabac0adbc55859
CRs-Fixed: 2371368
Populate Spectral capability structure with scaling parameters
from extended service ready event parameters. Send the spectral caps
via cf80211 interface.
CRs-Fixed: 2379652
Change-Id: Id0372bdd40843c2101df32d2e71920027a24909f
Flag WLAN_FEATURE_NAN_CONVERGENCE was added to protect the
converged NAN code inside NAN Component. Since the original
NAN Discovery related code has now been moved inside NAN
component, keeping this flag separate doesn't make sense.
Combine this flag with WLAN_FEATURE_NAN flag which is the
original NAN feature flag.
Change-Id: I0045dcccd36524cbcd4253347c9e0a5704193c2b
CRs-Fixed: 2377393
The original implementation of the "get link status" feature contains
some design and implementation details that are not ideal, so fix the
following deficiencies:
- The link_status_params struct contains three fields that are unused.
- The only link_status_params field that is used, session_id, uses
legacy terminology instead of converged terminology
- The wmi_unified_link_status_req_cmd() implementation uses a void
pointer instead of the correct underlying type for the WMI handle.
Note that change I508ec083298caa45d4cbb1ba28b21e47e379a804
("qcacld-3.0: Align with revised "get link status" Unified WMI") is
interdependent with this change.
Change-Id: I057ca0aff4a627c7fcdb9f90a5da46473813f60a
CRs-Fixed: 2381364
Callback signature in wmi_process_fw_event_default_ctx
is different for WIN and MCL. Make it same.
Change-Id: I28ad8e6068742095bdb9bc265e46dead8bfb217d
CRs-Fixed: 2372980
Change Ie6c4a9847f2daa9ba2aebd17f386d584201b86d6 ("qcacld-3.0: Remove
obsolete set/reset ssid hotlist") in the qcacld-3.0 project removed
the only client of the WMI SSID hotlist infrastructure. Since this
infrastructure is obsolete, remove it.
Change-Id: I4a1de39c982947bbf4958d976426f95e3217f1a3
CRs-Fixed: 2381277
wmi_unified_bcn_buf_ll_cmd in wmi_unified.h had compilation flag
CONFIG_MCL. To get rid of the compilation flag, a separate header
file is created
Change-Id: I0bbcdf749f461f6880aacc1e3ef4e8e8fdc08ff6
CRs-Fixed: 2366773
This FR is to enhance existing pktlog debug tool
This feature will allow to capture pktlog for particular
peer mac address.
Change-Id: I3676095536185f25b0d498e03f70246260a324fd
Requirement to provide various msdu retry stats to host:-
1. successfully transmitted msdus
2. Retried msdus
3. msdus retried for more than once
4. failed msdus
Change-Id: I4cd7dfceae16b4223df605fa174299858a8651c8
In the existing converged component, WMI TLV APIs are implemented in
a generic manner without proper featurization. All the APIs exposed
outside of WMI are implemented in wmi_unified_api.c and all the APIs
forming the CMD or extracting the EVT is implemented in wmi_unified_tlv.c.
Since WIN and MCL have a unified WMI layer in the converged component and
there are features within WIN and MCL that are not common, there exists a
good number of WMI APIs which are specific to WIN but compiled by MCL and
vice-versa. Due to this inadvertent problem, there is a chunk of code and
memory used up by WIN and MCL for features that are not used in their
products.
Featurize WMI APIs and TLVs that are specific to MCL -
- DSRC
- NAN
- P2P
- PMO
- roaming
- concurrency
- STA
- Generic MCL specific WMI (STA)
Change-Id: I03a68b0db30a3aa585b269ab0a1745b37bc7e0b7
CRs-Fixed: 2316935
FR: TDMA Support for Wave2 Radios (host support)
Added a wmi cmd for configuring the interval between successive sifs
trigger frames given by the user app. Added a separate wmi cmd instead
of wmi param with reference to further scope.
Change-Id: Ifa778a761e3495ef7abab5f63a49661b307034ae
CRs-Fixed: 2330484
In the existing converged component, WMI TLV APIs are implemented in
a generic manner without proper featurization. All the APIs exposed
outside of WMI are implemented in wmi_unified_api.c and all the APIs
forming the CMD or extracting the EVT is implemented in wmi_unified_tlv.c.
Since WIN and MCL have a unified WMI layer in the converged component and
there are features within WIN and MCL that are not common, there exists a
good number of WMI APIs which are specific to WIN but compiled by MCL and
vice-versa. Due to this inadvertent problem, there is a chunk of code and
memory used up by WIN and MCL for features that are not used in their
products.
Featurize WMI APIs and TLVs that are specific to WIN
- Air Time Fareness (ATF)
- Direct Buffer Rx (DBR)
- Smart Antenna (SMART_ANT)
- Generic WIN specific WMI (AP)
Change-Id: I7b27c8993da04c9e9651a9682de370daaa40d187
CRs-Fixed: 2320273
Add wmi layer support to get firmware roam scan statistics which includes
scoring of roam candidates, channels, old and new bssids etc.,
Change-Id: I3a0aafbe66d12eea40e71ceb4c7c3a60b9d6e04f
CRs-Fixed: 2203904
In wmi_unified_cmd_send() function, pass function name and
line number of caller and log the same in case of failure,
this approach helps to remove error logs in caller function
there by reducing text segment.
Change-Id: Ib70d55959087021c4495c175d5363375037afe00
CRs-Fixed: 2281983
