Re-factor vendor event buffer length calculation for NDP events
to a separate function call.
Change-Id: I6828067d0e81987d7c903fd7f7df05b3a4eadbe3
CRs-Fixed: 2183658
Define ucfg api to free stats_event, since it will be called from
osif and hdd.
Change-Id: Ifeea3e970ddca1ed508960c39a2a39f0ed755bd9
CRs-Fixed: 2231150
Added NL80211 testmode if directives to enable compilation when not
supporting the feature.
Change-Id: I00b8d982035b78f5893bd1bec79309c7ffa48d05
CRs-Fixed: 2231059
Check for interface name only when ndp response is "accept" from user. In
case of "reject" discard interface name provided and instead use first NDI
available.
CRs-Fixed: 2222041
Change-Id: Ib02fe7d5b93f8e388658e511317664a4999b5fa6
The service layer need not provide the iface name in the
responder request to the driver if the request is being rejected.
The service layer maps the ndp_instance_id only after accepting
the request, if the ndp indication is rejected, the user space
has no knowledge of the iface name on which the NDP would have
gotten mapped if it were successful
CRs-Fixed: 2222041
Change-Id: I94a7de0c98c14dbe2389dd8364b6dd78858a9d0a
Send correct channel list to Firmware. When cfg80211 is enabled, STA
is scanning in a set of wrong channels. When scan callback happens
from cfg80211 module the cfg80211 module gives us the channel numbers.
There are some channel numbers which are same in both 5GHz and in
2.4Ghz bands. For example, channel number 1 maps to frequency 4942MHz
in 5GHz band, but in 2.4GHz band channel number 1 maps to frequency
2412MHz. So cfg80211 may give us a wrong channel number. Since we have
the exact frequency of the channel we should use that instead of the
one given by cfg80211.
The channel object given to the driver by cfg80211 during scan callback
is the same as the one registered to cfg80211 by the driver. So we can
use the channel frequency inside the channel object for scan which is
not changed by the cfg80211 module.
Use regdb function to convert channel number to frequency while receiving
scan entries from FW. Use pdev band (5/2.4GHz) information to map to
correct 2.4Ghz/5Ghz channel frequency.
Half/Quarter rate flags in the scan_ctrl_flags are not set. Set
Half/Quarter rate flags in scan_ctrl_flags.
Change-Id: I9df8f0e90938f86f6987574f8259a5cf66b672aa
CRs-Fixed: 2180273
Move hdd_request_manager to qcacmn osif layer, which will be used
by CP_STATs component.
Change-Id: Iebf7f9d259793b56cc70c5b3f9dec14a5ef35b25
CRs-Fixed: 2220035
Based on the scan request flags from kernel, modify the
adaptive dwell time and DBS scan request policy.
In high accuracy mode, disable DBS scan and adaptive dwell
time scan mode.
In a low power/span mode, enable aggressive adaptive dwell time
and DBS scan to save power and time.
Change-Id: I23498799c05a252cbc9c9f6d50b847130dd0ceac
CRs-Fixed: 2197171
cfg80211_inform_bss_frame_data() takes an extra reference of
bss and it shall be freed by caller.
Change-Id: I6e2a37327fc369d01d237e7ff57221333709b53f
CRs-Fixed: 2205608
Add new attributes to vendor subcmd
QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_SET.
This carry the requisite information to
start / stop the connectivity stats collection.
CRs-Fixed: 2168412
Change-Id: Ie8a60754780433f40ed4d103b737c5e8d4e59c28
Add vendor command that provides the current
information of WLAN hardware MAC and its
associated WLAN netdev interfaces.
Change-Id: I70ffbdf44ddc45fe606d0ad6e69f1b284cffc6fe
CRs-Fixed: 2194757
Define os_if_spectral_netlink_deinit to close the Spectral socket and
de-register the os_if callbacks
Change-Id: I3d054c2a2d630d4d959861d3620592010d04c09a
CRs-Fixed: 2186113
There are scenario where indoor channel operations
(like active / passive scan/connect/roam etc)
are not desired / permitted specially in sap case.
Hence add support of disabling indoor channel
on sap start and revert it on sap stop.
Change-Id: Id6e01534532e3076a3e662e6a4f71e8be924165a
CRs-fixed: 2161319
Add vendor wifi test config command attribute to send
addba request with user configuration and to set the
no ack policy.
Change-Id: I2afd62478961a774d16becba49889e855ecf7415
CRs-Fixed: 2196977
In existing code scan queue cleanup is done during radio detach,
leading to access of freed vdev netdev.
Extend cfg80211 scan cleanup API to support netdev level cleanup.
Change-Id: Ice6b6d262788e71c6d229ed7de6ab0e17f270b6c
CRs-Fixed: 2185302
The qdf_str APIs have recently been moved from qdf_mem. Reference the
new qdf_str.h header file where appropriate.
Change-Id: If97c9c37a7d720a7b93e50ec228da67a8e980c2e
CRs-Fixed: 2196129
A recent commit changed the return type for qdf_str_len() to size_t from
int32_t. Update call sites for qdf_str_len() to store the return value
as size_t to match.
Change-Id: Ib8bfad2c1fc7de1f6fc601d1be69e734d3a49dcf
CRs-Fixed: 2196858
Add support to send the per chain rssi to upper layer
for each beacon and probe responses.
Change-Id: Ife6cb9e8e65591baf485c54a985f84d842400321
CRs-Fixed: 2177638
RX mgmt frame is from interrupt thread, it may be access freed roc
ctx for low rate case. Save vdev id of current roc ctx in p2p psoc
object. Low log level of P2P RX and TX conf since too many output.
Change-Id: I4c944244f32b844d78bb69d66e341a1f3bf13abf
CRs-Fixed: 2180116
Add QCA vendor command and attributes for vendor specific command to
set MSDU queue depth threshold in target per peer per tid. This command
contains mac addrees, tid, update mask and threshold value.
Change-Id: Ie119ff5aa333bcffcec0850464982dec59fb6a07
CRs-Fixed: 2162455
Define new vendor sub command for configuring the device with
wifi test configuration. Add new test config attributes for this
sub command that are used to configure the device for testbed
configuration.
Change-Id: Ic866d54ba528525c94bcc7b4a5a8cf9c5c1408d0
CRs-Fixed: 2186214
-Initialize the default Configuration as
gen2 for spectral module on MCL.
-Add support to general netlink socket.
Change-Id: Iab06f66d18c4791f0ff5483781634df2a7268ddb
CRs-Fixed: 2183870
Spectral Netlink related APIs are currently present in
target_if layer, move them to os_if layer.
Change-Id: I86a5495f6ec8aa85a2e9639902503a522b023f8e
CRs-Fixed: 2151548
Move wma_get_buf_start_scan_cmd logic to common code in
ucfg_scan_update_params.
Change-Id: I4c9dcb48b4862ad10f64e260d87938251e270185
CRs-Fixed: 2180960
When wide band scan is enabled, host configures all possible
channels with all possible phy modes. In his case if a scan
is invoked with 0 channels, target will end up scanning each
channel with all possible phy modes which increases scan time
exponentially.
If wide band scan is enabled and scan is issues with 0 channels,
configure target to scan all available channels only in 11A/11G mode.
Change-Id: I7c678ccf43c3238aacbfc59cc7e7bd19763453cc
CRs-Fixed: 2165025
Wrapper API is required to support building against multiple
Linux Kernel versions.
CRs-Fixed: 2184496
Change-Id: Ic4f3f6cf10910bd20b89dee0b250ea3ff265be70
QDF_MAC_ADDRESS_STR has been depreciated in favor of
QDF_MAC_ADDR_STR. Replace all usages with the new macro.
Change-Id: I534923783a32288f7861caf9ae52ca3aac965809
CRs-Fixed: 2179126
When invoked wlan_cfg80211_cleanup_scan_queue, it will try to clean
up pending scan requests in queue from kernel. However, when the
netdevice is down, this request could be already freed by kernel.
To fix this issue, also add the pointer to netdevice in scan_req
so what we can check the status of netdevice in scan_req instead
of cfg80211_scan_request which might already be freed for this case.
Change-Id: I6189c52b638bc4f408e4d4c694c178c7d2f3de52
CRs-Fixed: 2164404
Adds support for vendor attribute to enable RSNIE test mode. Once test
mode is set the driver will use the RSN IE's as-is from the connect
request. Exclusively used for the scenarios where the device is used as
a cert test bed and not recommended for production.
Change-Id: I5ae9856fe9fb0785a625cadd9a1fed1752bcb08a
CRs-Fixed: 2164530
The Linux kernel version 4.12 introduced an API change to
nla_parse_nested(). Add conditional compilation to call
nla_parse_nested with the correct parameters based on the
version of the linux kernel being compiled against.
Change-Id: I878a29b352c998a751a979f66a9c3c4c7ecfd442
CRs-Fixed: 2167861
Refactor NAN target_if to make it wmi-type agnostic. Specifically
do not access wmi structures in NAN target_if. All the access to
wmi structures should happen in tlv and non-tlv specific wmi files.
Change-Id: I944b678fc501723d7cd26c9b21c4cc6ddb7fda4e
CRs-Fixed: 2159876
Avoid possible null pointer dereferece and out of bound access
in NAN component.
Change-Id: I40ba4e340e34e8975c782c0a6329322e3c151326
CRs-Fixed: 2160751
Add QCA vendor command and attributes for vendor specific
Representative RF Operating Parameter (RROP) information. This
information is intended for optional use by external ACS. It provides
guidance values for some RF parameters that are used by the system
during operation, so that external ACS can utilize these to compare
between channels, bands, etc.
CRs-Fixed: 2152786
Change-Id: I911a96ad860331ab7af718c166806ffc7d1c5052
WLAN Latency module (WLM) is added by fw to gain latency
because of schedule out of service like power saving,
scanning, roaming etc. per the level set by framework.
Change-Id: I6b8775e5f492b6f287d60d39610a544114185a23
CRs-Fixed: 2152290
