Add init sequence handling to support AFC device deployment type
Set AFC device deployment type to regulatory private obj
Change-Id: Ib041d2010552412aaaa41395915d948aa2ea2bba
CRs-Fixed: 3190288
Currently host driver defines 11d offload APIs under
HOST_11D_SCAN feature flag which is not correct.
Add 11d offload APIs under TARGET_11D_SCAN feature flag.
Change-Id: I0d3205b215c9fc363a71c4e7a6b54e40fb10a964
CRs-Fixed: 3183200
Currently the 6G edge channel feature is MCC specific.
Make the 6G edge channel feature common for WIN and MCC.
Change-Id: I723b6db1d74dca5a911eede4ec6e6167f6b3e6bc
CRs-Fixed: 2976871
Enable lower 6G edge channel ch2 (5935MHz) for APL2 6G regdmn
using a service bit WMI_SERVICE_ENABLE_LOWER_6G_EDGE_CH_SUPP,
which is not enabled by default.
Also, disable upper 6G edge channel (7115MHz) using another
service bit WMI_SERVICE_DISABLE_UPPER_6G_EDGE_CH_SUPP, that
is enabled by default.
Change-Id: Ia7cb7f7d3165375178adbe70adb19b8671496b6d
CRs-Fixed: 2885623
In order to support different power levels of 6G AP and client,
the channel list event from FW namely "REG_CHAN_LIST_CC_EVENTID"
is modified to add few parameters specific to 6GHZ devices.
Hence the existing event is replaced by REG_CHAN_LIST_CC_EVENT_EXT for
all 2G/5G/6G pdevs in FW. Therefore, after the service ready event, FW
sends the channel list for the configured country/regdomain via
REG_CHAN_LIST_CC_EVENT_EXT. This mandates that all host software need
to have the processing capability of REG_CHAN_LIST_CC_EVENT_EXT to bring
up the AP.
As there can be host software which has not yet implemented the
version of "REG_CHAN_LIST_CC_EVENT_EXT", backward compatibility is lost
if "ONLY REG_CHAN_LIST_CC_EVENT_EXT" is sent by FW.
Hence a 3 way handshake between host and FW is established.
1. FW advertises its capability of processing REG_CHAN_LIST_CC_EVENT_EXT
id via wmi service bit 'wmi_service_reg_cc_ext_event_support'.
2. If the host is capable of processing the "REG_CHAN_LIST_CC_EVENT_EXT"
event id (which is done based on registration of this event), host
sends the capability in WMI_INIT_CMDID setting a bit in host_service_flags.
3. Based on host capability advertised in WMI_INIT_CMDID, FW decides to
send the old event ("REG_CHAN_LIST_CC_EVENTID") or the new event
("REG_CHAN_LIST_CC_EVENT_EXT").
4. If there is no flag indicated by host to FW in WMI_INIT_CMDID, FW
by default sends the old event ("REG_CHAN_LIST_CC_EVENTID").
CRs-Fixed: 2876360
Change-Id: Ibe95f414ad9fff0e5641bcc6e60450ef9afe245b
The host will send TPC power to FW via the new WMI cmd
WMI_VDEV_SET_TPC_POWER_CMDID going forward instead of
WMI_VDEV_PARAM_TX_PWRLIMIT to accommodate 6GHz channels.
But, to support backward compatibility for New Host+old FW
the TPC power will be sent to FW via legacy WMI cmds
WMI_VDEV_SET_PARAM_CMDID (during initial connection) or
WMI_VDEV_PARAM_TX_PWRLIMIT (power value change during RRM
req/bcn processing from connected AP) with the help of a
service bit WMI_SERVICE_EXT_TPC_REG_SUPPORT.
Change-Id: I22e11ff847cd384fac8ea0061e5df42cea0c8de8
CRs-Fixed: 2874245
Add new channel bonding pairs as well as frequency
pairs for 40, 80 and 160 MHz with the support of
three new 5.9 GHz channels 169, 173 and 177.
Add new API reg_modify_chan_list_for_5dot9_ghz_channels
to enable/disable these new channels based on
INI value and service bit.
Change-Id: I8598e705ba4047e96e7167661ba70d4236cde251
CRs-Fixed: 2696211
Add API to know whether 6ghz is supported. Also add API to know
whether an operating class is 6ghz operating class.
Change-Id: I75747502c0033e31d119e58a2254b220646bba10
CRs-Fixed: 2556998
Currently 11d offload functionality is in reg_host_11d.c and
reg_host_11d.h files and are getting controlled with a
feature flag HOST_11D_SCAN.
HOST_11D_SCAN flag is to enable host 11d scan and 11d offload
feature should not be controlled with this flag.
Move 11d offload functionality to separate files
reg_offload_11d_scan.c and reg_offload_11d_scan.h.
Change-Id: Ia56fe7009f2f5f9317da9e0e22f15040fe19a20d
CRs-Fixed: 2382486
Remove 11d and LTE feature specific code from target_if_reg,c file.
Removed code is present in target_if_reg_11d.c and target_if_reg_lte.c
files.
target_if_reg.c file has the common code used by both WIN and MCL.
Change-Id: I976efbfadc6b01289cb258be4856b81d4783456a
CRs-Fixed: 2349173
Create target_if_reg_11d.c and target_if_reg_lte.c files.
Move 11d and LTE feature specific code from target_if_reg.c file to
these files.
These files has only MCL specific code.
Change-Id: I016c6e6c8b6d54670496367e08ac5d83ad94bebd
CRs-Fixed: 2349173
In the scan channel list, host sends both 2.4GHz and 4.9GHz channels to FW
because there are ieee channels which have same value in 2.4 GHz and 5GHz
bands. Example: channel 1 is 2.412 in 2.4GHz and 4.942 in 5 GHz.
When converting a channel to freq, the host uses low/high 2GHz and 5GHz
frequency ranges. For a partial-offload 5GHz pdev, both low/high 2.4 GHz
and 5 GHz frequencies are set and hence 4.9 GHz channel is converted to
2.4GHz frequency.
To fix the above issue, based on the wireless modes remove either low/high
2.4 GHz or low/high 5 GHz frequency based on the wireless modes.
Change-Id: I1fb0a56c70d1dc0ffc2731da3f25c910af46bb41
CRs-Fixed: 2239771
Implement service ready, ext service ready
ready event handler, init command preparation
and other required APIs
Change-Id: Iaf707227c1e94bb492dd86bd2d0916a1cf875498
CRs-Fixed: 2177109
Add event handler for WMI_REG_CHAN_LIST_CC_EVENTID.This handler
would be called from psoc_open object manager framework
initialization.
Change-Id: Icfd52fdb7056fdb77afdbd1be576d160719b7285
CRs-Fixed: 2002892
