In case when ACK_BA_STATUS is not received, the ppdu phy tx time is not
getting calculated even though the media is used for the ppdu.
Add fix to ppdu phy tx time irrespective of ACK_BA_STATUS
Change-Id: I23d29b2d282edf6e5d49ce18aecd81e5239a118b
CRs-Fixed: 3288380
Check peer_monitor is valid before processing.
This is required for new boot flow where vap creation starts
before monitor ko insmod.
This check makes sure that monitor_peer is valid which indirectly
means that monitor ko is insmoded.
Change-Id: Ifd132cd6717e3537dd1aa7b7b37e95012d7fe8fc
CRs-Fixed: 3272747
Monitor vdev attach is called both AP and Monitor VAPs
AP vap creation are started prior to monitor install.
So, add the check to determine whether valid monitor vdev or ap vdev.
Change-Id: If7a83a6826499574f88a4a1220ba3642c028f66a
CRs-Fixed: 3240300
Update RSSI specific parameter from beryllium
specific path to common path as part of
extending feature for lithium also.
RSSI calibration parameters are received as part
of WMI event from FW, update these parameters to
monitor pdev via CDP interface.
Change-Id: I4e35d873db6d1ad03d86694a8d36decffe409a0e
CRs-Fixed: 3231120
To avoid memory fragmentation during wifi down/up,
initialize ppdu info flex mem pool during pdev attach
instead of pdev init.
CRs-Fixed: 3235962
Change-Id: I7970ab056e600ccfe28ae1ccdc50a66d5ae0ade8
- Handle scenario where decap type may be invalid when
buff address tlv is received.
- Add check for min number of frags during restitch process.
- Minor fixes during rx mon tlv processing.
Change-Id: I0120d97e297701362183189e29c1d5df91affdc1
CRs-Fixed: 3216050
Changes to configure the rxdma ring for CFR. Move existing
API of legacy chipsets to dp_mon_1.0 and add Waikiki
specific API in dp_mon_2.0.
CRs-Fixed: 3231265
Change-Id: Id7276bb7bb7f58461c7e10a0695c3e78a1c39b0c
a. Fix memleak issue due to RX_HDR not received for a MPDU
b. Compute appropriate packet offset for non-decapped packets
c. Add correct DMA_LEN while adding a frag to SKB.
d. Add debug stats
Change-Id: Ie946f79df94df05789220b97c159c60d608bf1b2
CRs-Fixed: 3213698
This change fixed compilation issue when enabled two configures -
CONFIG_WDI_EVENT_ENABLE and CONFIG_REMOVE_PKT_LOG.
Change-Id: I121ea61bd3681b834a36c0bc8017b855897023a4
CRs-Fixed: 3223552
Remove unused local variable mon_soc in the dp_pktlogmod_exit to
address the compiling issue when PKT log enabled.
Change-Id: I5de03433603988e6f8125285a58c141551d7a149
CRs-Fixed: 3225370
In case of MLO, peer consumpiton stats are getting incremented only for
primary peer as the API was called after primary peer check.
Add fix to call the API before primary peer check so that the stats are
updated for all the link peers
Change-Id: I603e7a37564858e030d8f0f5f16792f516728f60
CRs-Fixed: 3222984
Since more than one components depend on reap timer of
monitor status ring, add bitmap to record the trigger
sources of the timer and refine the APIs/calling functions
accordingly.
With this change:
When a new start request comes, if the source is
CDP_MON_REAP_SOURCE_ANY, skip bit set, and start timer
if any bit has been set in the bitmap; while for the
other sources, set the bit and start timer if the bitmap
is empty before that.
When a new stop request comes, if the source is
CDP_MON_REAP_SOURCE_ANY, skip bit clear, and stop timer
if any bit has been set in the bitmap; while for the
other sources, clear the bit and stop timer if the bitmap
is empty after that.
Change-Id: Idaa7837c4b93b247ff2236aa5072d309fa9548c2
CRs-Fixed: 3190347
For telemetry agent, some more statistic support is required.
Hence, add support for telemetry agent required stats.
Change-Id: Ieb2210a4a5dfe6fa0a0dd46a85f2d9ae483bb746
CRs-Fixed: 3210797
Module unload is getting trigered in between
Vap restart due to channel switch
while waiting in monitor module unload for 500ms VAPs are coming up.
And after wait, during monitor pdev deinit
HOST start receiving stats indication.
Monitor pdev is getting dettached while processing stats indication.
Move register/derester of stats handler to intr ops.
Change-Id: I821c144f54bfe78c567039ab57fcf1eac7cb4f46
CRs-Fixed: 3192980
During frequent channel changes in corner case we observe
that mpdu ppdu id does not match dest ring curring ppdu id.
Such mpdus are dropped. Add stats to count such dropped mpdus.
Change-Id: If52e81f4e718ce0d7f83a41f4f0121394525b9df
CRs-Fixed: 3144784
calculate rssi_comb and rssi per chain values using
parameters received from the fw.
Change-Id: Ide56549c7d7ee9bde609dc6764013d509f7ccac0
CRs-Fixed: 3157484
Enable smart moniotr operations to add/delete
NAC clients and to get NAC client rssi value.
Change-Id: Ifc933d474da15101293cf3e1c07261917fb634f9
CRs-Fixed: 3169256
Add function to setup/reset lite monitor filters
whenever lite monitor mode is enabled/disabled
respectively through cmd line.
Also add function to configure rx header tlv dma length.
Change-Id: Ia5d8bc36e1d033b3e15737bb6b9854f6a7cdd5df
CRs-Fixed: 3143570
With new configuration changes for enable_peer_extended stats, update
code to peer_extended_stats naming for clean codebase.
Change-Id: I97a7ee331042232098382683fefebd05e6b099c3
CRs-Fixed: 3149920
Populate punctured pattern from WIFIPHYRX_COMMON_USER_INFO_E
And get puncture type from puncture pattern.
Change-Id: I3a5ba4c7c478d15cf3c3cfdcfd0573775ae342ca
CRs-Fixed: 3166010
Log level was accidentally increased hence reducing log level
to info to avoid unnecessary prints on console.
Change-Id: Idbe495cbdc8a17112f034083c2f8ebf297dcdc6b
CRs-Fixed: 3157393
The per packet info feature can be enbaled to support enhanced
stats independent of mesh mode.
Change-Id: I852e7a958c520901b6f418d30deb53fa2f68fb68
CRs-Fixed: 3079000
Display phyrx aborted undecoded frame count and the aborted
reason statistics as part of pdev rx mon stats.
Change-Id: Ia86074e62af3179855734b47801715abd1899fe1
CRs-Fixed: 3123540
Update enhanced Tx stats from Tx HTT PPDU completion path in WKK.
Define and use function pointers for architecture specific
functionality.
Change-Id: I4ba443647dbd81c83e899c0f88c5d9a4cc695e14
CRs-Fixed: 3132255
During undecoded mode capture reset expected to reset
only phy error filter flags. But disabled monitor mode
capture filters as well. This resulted a backpressure
in monitor mode destination ring.
Added an appropriate check to disable only phy error
filter without disturbing monitor mode filter setting.
Change-Id: If3ef8e9f41f32dff30773aeb939256920c515800
CRs-Fixed: 3137636
dp_is_hw_dbs_enable() is checking DBS and update number of
MAC rings value, current function name makes confusion.
rename it to dp_update_num_mac_rings_for_dbs().
Change-Id: I82540a943445560a99e27067e58d59035147208b
CRs-Fixed: 3131546
