When the length of a 802.11 frame is more than the
size of the posted receive buffers, it is split across
multiple buffers, which have to be accumulated before
submitting to network stack.
For all-but-last buffer which are used for the above
mentioned large 802.11 frame, the MSDU_CONTINUATION
flag will be set indicating that remaining data of the
same msdu has been DMA'ed to the next buffer.
The current implementation in monitor-1.0 works for
legacy chipsets, where MSDU_START tlv is available and
hence the aforementioned information was available in
all the buffers containing the large 802.11 frame.
For kiwi target, there is no MSDU_START tlv, and hence
a lot of information eg: mpdu_len_err, decap_format and
l2_hdr_offset are not available in the buffers where the
msdu_continuation flag is set. This leads to an attempt
of mpdu_restitch using incorrect data from tlv, and hence
the mpdu_restitch fails for such large 802.11 frame.
Fix this issue for kiwi target, by gathering all these
information which are available in the last buffer and
are used to process/accumulate the entire 802.11 frame.
Change-Id: I1c4fc9fd574c1c5fabc845407aa6f2d990c60906
CRs-Fixed: 3261494
Compilation is failing when Monitor support is disabled
Moved monitor related API and structure to monitor header files.
CRs-Fixed: 3257872
Change-Id: Ie1b3dc16b38c88bfd73fc89aaa395d4b57a61e5c
Update RSSI specific parameter from beryllium
specific path to common path as part of
extending feature for lithium also.
RSSI calibration parameters are received as part
of WMI event from FW, update these parameters to
monitor pdev via CDP interface.
Change-Id: I4e35d873db6d1ad03d86694a8d36decffe409a0e
CRs-Fixed: 3231120
Changes to configure the rxdma ring for CFR. Move existing
API of legacy chipsets to dp_mon_1.0 and add Waikiki
specific API in dp_mon_2.0.
CRs-Fixed: 3231265
Change-Id: Id7276bb7bb7f58461c7e10a0695c3e78a1c39b0c
Add history to track the monitor status buffer entry.
Currently the below 3 events are added:
- Monitor status buffer reap from ring
- Buffer enqueue to a local list
- Buffer dequeue from local list for parsing.
Change-Id: I7c17070ffee25a9a9dc4af0b48bfa8808e18887d
CRs-Fixed: 3225647
Split tx and rx monitor buffer add function so that
they can be indivudually called when lite monitor mode is enabled.
Change-Id: I9996d0261f1912237bd6fa45058d410698b9fa28
CRs-Fixed: 3206170
Since more than one components depend on reap timer of
monitor status ring, add bitmap to record the trigger
sources of the timer and refine the APIs/calling functions
accordingly.
With this change:
When a new start request comes, if the source is
CDP_MON_REAP_SOURCE_ANY, skip bit set, and start timer
if any bit has been set in the bitmap; while for the
other sources, set the bit and start timer if the bitmap
is empty before that.
When a new stop request comes, if the source is
CDP_MON_REAP_SOURCE_ANY, skip bit clear, and stop timer
if any bit has been set in the bitmap; while for the
other sources, clear the bit and stop timer if the bitmap
is empty after that.
Change-Id: Idaa7837c4b93b247ff2236aa5072d309fa9548c2
CRs-Fixed: 3190347
Module unload is getting trigered in between
Vap restart due to channel switch
while waiting in monitor module unload for 500ms VAPs are coming up.
And after wait, during monitor pdev deinit
HOST start receiving stats indication.
Monitor pdev is getting dettached while processing stats indication.
Move register/derester of stats handler to intr ops.
Change-Id: I821c144f54bfe78c567039ab57fcf1eac7cb4f46
CRs-Fixed: 3192980
Currently, for kiwi, the tlv parsing from monitor
status buffer stops when it encounters MPDU_START
tlv. This happens since the return value after the
parsing of MPDU_START is not one amongst the allowed
return values for the tlv parsing to be continued.
Add MPDU_START tlv parsing return value to the allowed
return values, in order to continue the parsing of tlvs
from monitor status buffers.
Change-Id: I51cfecb7df8d8055a37e1b898419ec322dad63db
CRs-Fixed: 3203708
Add WAR to skip multiple ring entries in case if DMA is not
done for more than one entry in monitor status ring
CRs-Fixed: 3206692
Change-Id: Id24deb18d173e521efda38716244f375a409d7f5
calculate rssi_comb and rssi per chain values using
parameters received from the fw.
Change-Id: Ide56549c7d7ee9bde609dc6764013d509f7ccac0
CRs-Fixed: 3157484
Add function to setup/reset lite monitor filters
whenever lite monitor mode is enabled/disabled
respectively through cmd line.
Also add function to configure rx header tlv dma length.
Change-Id: Ia5d8bc36e1d033b3e15737bb6b9854f6a7cdd5df
CRs-Fixed: 3143570
With new configuration changes for enable_peer_extended stats, update
code to peer_extended_stats naming for clean codebase.
Change-Id: I97a7ee331042232098382683fefebd05e6b099c3
CRs-Fixed: 3149920
a. For decapped frames, convert frames from 802.3 t 802.11
b. for non-decapped frames no conversion is needed
c. Apply radiotap header and deliver MPDU to osif layer
CRs-Fixed: 3074441
Change-Id: Ia03b4bad35d69aa292958782cd424f3df56dabbc
The per packet info feature can be enbaled to support enhanced
stats independent of mesh mode.
Change-Id: I852e7a958c520901b6f418d30deb53fa2f68fb68
CRs-Fixed: 3079000
There is a possible race condition that target_start can be
called during load unload leading to htt_srng_setup being
called before monitor srngs are initialized. This check will
prevent the srng_setup_call from soc_start. The rings will
subsequently be initialized when monitor modle is loaded.
Change-Id: Ie697b45425e38e6d709b7466bb495a20bef4f820
CRs-Fixed: 3125255
1. Drop the received undecoded frame if error code
abort reason not matched with configured error mask.
2. Reset phy error mask during undecoded capture mode reset.
Change-Id: I162ac1b60ceb5a4b5a87ff2d2186f2e67815f580
CRs-Fixed: 3134562
Update enhanced Tx stats from Tx HTT PPDU completion path in WKK.
Define and use function pointers for architecture specific
functionality.
Change-Id: I4ba443647dbd81c83e899c0f88c5d9a4cc695e14
CRs-Fixed: 3132255
During undecoded mode capture reset expected to reset
only phy error filter flags. But disabled monitor mode
capture filters as well. This resulted a backpressure
in monitor mode destination ring.
Added an appropriate check to disable only phy error
filter without disturbing monitor mode filter setting.
Change-Id: If3ef8e9f41f32dff30773aeb939256920c515800
CRs-Fixed: 3137636
dp_is_hw_dbs_enable() is checking DBS and update number of
MAC rings value, current function name makes confusion.
rename it to dp_update_num_mac_rings_for_dbs().
Change-Id: I82540a943445560a99e27067e58d59035147208b
CRs-Fixed: 3131546
The monitor status ring is configured for filtering
in undecoded phy error packets. Each phy error can
be controlled using a specific error mask configuration.
Added below cfg80211tool command to configure phy error
mask for filtering undecoded phy error packets.
cfg80211tool wifix set_phyrx_error_mask mask_0to31 mask_32to63
cfg80211tool wifix get_phyrx_error_mask
Change-Id: I5e4f6a49458cc534d6d1d0f7f2a7424f3cc747b4
Added change:
1. Set/reset RXDMA MON STATUS ring filter setting and send HTT
message to capture undecoded frame
2. Handle undecoded frame to update cdp_rx_indication_ppdu structure
from hal ppdu_info rx status and generate WDI event to deliver it
to upper layer
Change-Id: I14485f28333b113b5a2fab639611551c2b08af2b
Currently the monitor buffers allocation is attempted
for 2 RXDMA monitor status/destination rings.
For certain targets, eg KIWI, there is only one RXDMA
monitor status/destination ring, and the monitor buffer
allocation for the second ring fails. This return status
is not handled properly.
Fix the monitor buffer allocation to use the number of
rxdma rings from cfg context and handle the return status
properly.
Change-Id: I86718dbd790d96d794963b17a4c9bdf32792d854
CRs-Fixed: 3128299
MO stands for Monitor Other which is a filter setting specified by
host to hardware to receive TLVs for non-associated clients.
In case of enhanced stats and smart monitor, non-associated clients
are not considered and therefore disable filter settings for MO for
these features.
Change-Id: Ic533072ff668c7ab54188101a889882c4ee4ba4a
CRs-Fixed: 3123784
Changes for vdev and pdev stats as per the new peer stats
re-organization architecture.
Change-Id: I48f9fb4b0915c40f4add83f2e2dd074cc97874fd
CRs-Fixed: 3092123
Changes to get and reset peer stats as per the new peer stats
re-organization architecture and taking MLO scenario into
consideration.
Change-Id: I1c49e11d502585cc955ad087ffe3a606be23d83e
CRs-Fixed: 3092123
* Initialize stats in dp_txrx_peer and dp_monitor_peer as per
the stats re-organization.
* Update peer calibrated stats on every timer expiry of 1 second.
* Define APIs to reset monitor_peer stats and to fetch rdkstats_ctx
from monitor peer.
* Place check to make sure that monitor peer related APIs are
are called only for legacy peer or MLO Link peer.
* Update peer based pktlog flag, tx and rx capture feature flags
in monitor_peer.
Change-Id: Idadbe19e85d4a9fdf77fb6dabe0c8a4952b024b8
CRs-Fixed: 3092123
Check physical address of nbuf with ring addr. If they
don't match, move to the next descriptor. Activated with
build flag.
Change-Id: Ibd6b38679d677a59f14450db3224104396c88d2e
Add function pointers to free buffer address stored in status buffer
and support tx monitor in legacy and Waikiki flow.
Change-Id: I28612d388009292ff751fe514183fb801909f485
Introduce a new flag "BE_PKTLOG_SUPPORT" for beryllium specific
pktlog support.
Change-Id: If91156541b322905ad5d97cf2d9d7ae687290ecb
CRs-Fixed: 3115832
- Fixes for compilation issues after enabling
monitor 2.0 support.
- change copyright year for all files in the chain.
Change-Id: I885e257bd8ca83850656d8a1f408c1bc34920d7a
CRs-Fixed: 3086483
For WCN7850, the first mac (i.e.. MAC0) is capable of
2G/5G and 6G data transfer. Hence initialize and use
only on RXDMA monitor status ring.
Change-Id: Idb6e23a887a9ed32a52dd54765e5ed3c6a12df06
CRs-Fixed: 3094138
