Add support to invoke HIF runtime PM APIs in TX packet path based on
throughput level. Essentially at high throughputs, where runtime PM is
not expected to provide power gains, invoking the APIs is deterimental to
performance.
Hence invoke runtime_pm APIs based on throughput level.
CRs-Fixed: 3059712
Change-Id: I49d111bffa8a37c68abbdd54911f9ecc22430562
Add disconnect wake lock reason code to add a wake lock
for WiFi disconnection.
Change-Id: I2ac33239c9df76d7c92429b9ada0380ad79fc72c
CRs-Fixed: 3045132
Add BW_320MHz in mgmt_ch_width in host diag module.
Also remove WLAN_FEATURE_11BE feature flag within enum
mgmt_dot11_mode for 11BE related modes.
Change-Id: I2914735edd5aa21ad1d94b0e5fcf718b189fc432
CRs-Fixed: 3009301
There is potential risk when starting CFR and resume happens at same
time, so this change adds wake lock for enhanced CFR.
Change-Id: Ifbde12cb73092b7fc4ef517e57051af4ffe7a79f
CRs-Fixed: 2974733
Fill peer assoc mlo params in peer assoc request command.
Also add definitions to the WMI_SERVICE_11BE.
Change-Id: Ied7959e022ee27f3bd698b84dc801491175f85b3
CRs-Fixed: 2934417
netlink_broadcast() will return -ESRCH when diagLog socket in
userspace is not present, then massive and repetitive error log
shown as below will be print. To address this, don't print
error log if netlink socket is absent.
"Ptt Socket error sending message to the app!!"
"ptt_sock_send_msg_to_app:Failed sending Msg Type [0x5050] to pid"
CRs-Fixed: 2801137
Change-Id: I14858625732c06442561e9a2e76fe2cfb6dabc12
There are multiple places in the driver where the diag events
are reported and if the unload has started these diag events
are logged and dropped if there is storm of diag events because
of some thread message flushing this logging of the message will
cause excessive logging.
Remove the log as driver is unloading and it won't be sending it
userspace logging either.
Change-Id: Ie4c5caf44ad509da213f1bc76ff6ef6dfeecde2d
CRs-Fixed: 2716899
Add a new wakelock for idle shutdown in order to prevent suspend
from occurring during idle shutdown.
Change-Id: Ia0c7422d3a12e7ff27d5acf9f57a81be13e5ef7d
CRs-Fixed: 2706461
Fix array index overrun by changing index size
WLAN_MAX_ROAM_CANDIDATE_AP from 8 to 9 in a roam
scan API
Also, replace local macro WLAN_MAC_ADDR_SIZE with
global macro QDF_MAC_ADDR_SIZE to avoid issues in
future
Change-Id: Ib546d18e1d85e87064eb5b78c08168db583acf2d
CRs-Fixed: 2621600
Update the diag log codes for below excluding the LOG_1X_BASE_C
offset, as its added explicitly:
LOG_WLAN_AUTH_ASSOC_TX_RX_INFO_C
LOG_WLAN_ROAM_TRIGGER_INFO_C
LOG_WLAN_ROAM_SCAN_INFO_C
LOG_WLAN_ROAM_RESULT_INFO_C
LOG_WLAN_RRM_TX_RX_INFO_C
Change-Id: I7f4918542760b518a9ea5ffa90ca554a5c9c5c8a
CRs-Fixed: 2599120
Add the diag log structure for protocol data packet
info to be sent as diag log to user-space.
Change-Id: I604a8e4d4355c39e66cd1b6b877aecb7f658b316
CRs-Fixed: 2595797
Add data structures to support diag log payloads. Define
new diag logs with the log id defined at the global diag
logs definition.
Below new diag logs are introduced:
LOG_WLAN_AUTH_ASSOC_TX_RX_INFO_C
LOG_WLAN_ROAM_TRIGGER_INFO_C
LOG_WLAN_ROAM_SCAN_INFO_C
LOG_WLAN_ROAM_RESULT_INFO_C
LOG_WLAN_RRM_TX_RX_INFO_C
Change-Id: I08b8ce156b405e555bc9c981b46ee8924bc76364
CRs-Fixed: 2595648
Idle restart needs to prevent system suspend and hence, add new
reason code for idle restart.
Change-Id: I15f7be551f00bd910a61080c087a8f85dd2fe7da
CRs-Fixed: 2490992
Add Diag log support for logging cold boot calibration
data sent by firmware via cold boot cal wmi event.
Change-Id: I932fd5f87667498b77ee13ca5b3ce08d6001cdf0
CRs-Fixed: 2413451
Currently there are no diag events to inform user space about
algo num, Tx Seq num and status code of auth req.
Add such diag events which can be useful in automation.
Change-Id: I0fb698b62a114c867113a89aa67f9778b80de118
CRs-Fixed: 2331702
Currently there are no diag events to inform user space about
used AKM Suite, requested pairwise cipher, group cipher, and
group key management in assoc request and algo num used in auth
req.
Add such diag events which can be useful in automation.
Change-Id: I25336d541f507bfa16e3b6e10b0653fcce898021
CRs-Fixed: 2225883
MGMT frame's subtype enums are not correctly displayed on debugging tool
due to incorrect enum values.
CRs-Fixed: 2252180
Change-Id: Ib7e7111e43e95166e3ba87a758295948eb72ba0f
Add APIs for ACS diag event:
- EVENT_WLAN_ACS_REQ
ACS request event indication
- EVENT_WLAN_ACS_SCAN_START
Indicates the diag event for ACS scan start request
- EVENT_WLAN_ACS_SCAN_DONE
Indicates the diag event for ACS scan done
- EVENT_WLAN_ACS_BEST_CHANNEL
Indicates the best channel has been selected after ACS
- EVENT_WLAN_ACS_CHANNEL_SPECTRAL_WEIGHTCHAN
Indicates a diag event for ACS channel weight evaluation result
Change-Id: I508449c597caddba14a49aa9cf5da671b80e5bc4
CRs-Fixed: 2238687
Address the following issues in the utils folder:
CHECK: 'interupt' may be misspelled - perhaps 'interrupt'?
CHECK: 'ommitted' may be misspelled - perhaps 'omitted'?
CHECK: 'TRESHOLD' may be misspelled - perhaps 'THRESHOLD'?
Change-Id: Ic9c2fdf2566f3bdd8c37906e52ed65d4dc1d1563
CRs-Fixed: 2241587
Add diag event and its structure to log various connection statistics
after the connection has been made.
Change-Id: I3572cd9230d89e2d4154fd43579c258a2e2bdb58
CRs-Fixed: 2208509
Add ini to configure BTM offload configuration
which is sent to firmware as part of RSO start
via wmi btm config cmd.
Change-Id: I69c792705b208014af8f1878f7645d957dde6c06
CRs-Fixed: 2105112
Propagation from qcacld-2.0 to qcacld-3.0
Add diag event for wow packet counters stats.
The event EVENT_WLAN_POWERSAVE_WOW_STATS will be used to
inform the wow stats packet counters.
Change-Id: I9d1760aa6b790544b9879e7ef18d4f5359e0e245
CRs-Fixed: 1087714
Add IFACE_CHANGE_TIMER wake lock event to track
apps power collapse is prevent due to change
interafce timer is running.
Change-Id: I6df238ec2092d3190d0ae52748427955f7c35a9e
CRs-fixed: 2105189
Add new diag events for the wlan disconnection these
events will be used to inform the wlan disconnection scenario.
Change-Id: I6bdddb2d3f45deca2dc92a94e2abf59f46d7c38f
CRs-Fixed: 1108380
