Extend the peer queue flush command with following attributes
1. Enable to flush per TID peer queue
2. Enable to configure when to flush the peer/TID queue
Change-Id: I1c8a9ca82cdfdd67eaf69b73a8a7076ca9c02dab
CRs-Fixed: 3130761
This change is to vendor attribute for peer TID flush vendor
cmd QCA_NL80211_VENDOR_SUBCMD_PEER_FLUSH_PENDING.
Change-Id: If112ec288a64622b9bf7fe625f7ac9e127d0ecbe
CRs-Fixed: 3170381
Add support to reset eLNA bypass configuration to default behavior.
If value of 2 is configured, the driver can choose either to
disable/enable eLNA bypass control and there is no enforcement
from userspace.
Change-Id: I813abe5beda49e394ff381aae57c78069ca28784
CRs-Fixed: 3172147
Add a QCA_WLAN_VENDOR_FEATURE_USE_ADD_DEL_VIRTUAL_INTF_FOR_NDI
flag to indicate that the driver requires add/del virtual interface
path using the generic nl80211 commands for NDP interface create/delete
and to register/unregister of netdev instead of creating/deleting
the NDP interface using vendor commands.
With the latest Linux kernel (5.12 version onward), interface
creation/deletion is not allowed using vendor commands as it leads to a
deadlock while acquiring the RTNL_LOCK during the register/unregister of
netdev. Create and delete NDP interface using NL80211_CMD_NEW_INTERFACE
and NL80211_CMD_DEL_INTERFACE commands respectively if the driver
advertises this capability.
Change-Id: Icb1782b147cf7ef7fed7bb4ba28ece23d4b0dc21
CRs-Fixed: 3167119
Add support for new QCA nested attributes to pass the AFC channel
information as part of the external ACS request command,
EXTERNAL_ACS_EVENT_CHAN_INFO.
Change-Id: I9ab4b8bfce64ea31226dad90f39bee22086b94d9
CRs-Fixed: 3152230
Add kernel timestamp attribute in enum qca_wlan_vendor_attr_diag
for subcmd QCA_NL80211_VENDOR_SUBCMD_DIAG_DATA to send it from
driver to userspace. Also, QCA_WLAN_VENDOR_ATTR_DIAG_HOST_TIMESTAMP
attribute indicates the system timestamp but is documented as kernel
timestamp wrongly. So correct the documentation of this attribute to
reflect the correct behavior.
Change-Id: I9559345185cb75ae6adc6792126fc6679b089e5d
CRs-Fixed: 3150783
Add QCA_WLAN_TWT_NOTIFY command type to send event to userspace when AP
changes TWT required bit field in its capabilities.
Change-Id: I6333213f4e8ca4fe9ca637db287759fd6c6622f4
CRs-Fixed: 3143525
Add support to receive the fft_recapture arg value
from spectraltool, handle the FFT recapture config and
pass this to FW. The recapture feature must be
enabled only for spectral scan period > 52 us and
Normal Spectral scans.
Change-Id: Ied637704d25bb15bff2139a215da7481d4f80e4f
CRs-Fixed: 3140890
Introduce a new vendor command QCA_NL80211_VENDOR_SUBCMD_RATEMASK_CONFIG.
This is used to set the rate mask config to be used in mcs rate selection
per PHY type.
Change-Id: I013a547be89dac187bc48531a674f3dde8a3f6e9
CRs-Fixed: 3137604
Add support for the QCA_WLAN_VENDOR_ATTR_PEER_NDPE_SUPPORT
and QCA_WLAN_VENDOR_ATTR_NDP_SERVICE_ID vendor attributes
in the driver.
Change-Id: I8835f363f8327315c9ec91acfb3770cd3313f572
CRs-Fixed: 3128863
Add QCA_NL80211_VENDOR_SUBCMD_MCC_QUOTA. When two or more interfaces are
active on the same band and two different home channels (MCC), the
target may allocate quota of "on channel" time for each home channel.
The target will indicate the quota information to application layer with
this event. Application may do TX bitrate control based on the
information. The user may also set the MCC quota for an interface by
using this command.
Change-Id: Ic8d8c5a5f2a6f0c55fd46394fa8e2062a37abefc
CRs-Fixed: 3101791
Currently the moderate latency level is not used. Rename the moderate
latency level to XR latency level to be used in XR (extended reality)
applications.
Change-Id: Ie5ca8983c17800131bb554dbb14f5cf94023aa1c
CRs-Fixed: 3128109
Add a QCA vendor netlink interface to start/stop periodic TSF sync
feature and also support configuration of interval value as part of TSF
sync start command. In addition, improve documentation for the related
attributes and values.
Change-Id: Ia39609a3cc72c0194fe4685e43f08f1c49f8b412
CRs-Fixed: 3108416
Add additional attributes in QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_EXT
vendor sub command to avoid usage of unsafe frequencies on wifi
interfaces sent from userspace to the driver/firmware.
The driver/firmware shall use restrictions and power cap accordingly
to restrict the usage of these frequencies on operating interface(s).
Change-Id: Ib2234137e436f1ddfe1163aed6e1d4b291f19aa8
CRs-Fixed: 3098836
Add QCA_WLAN_VENDOR_ATTR_ACS_EHT_ENABLED flag attribute to conduct ACS
for EHT mode. The driver can consider EHT specific parameters such as
puncture pattern for ACS when this flag attribute is indicated by
userspace.
Change-Id: I9cb0b7a6bc830a5f4f01a7a7fa5212cc6b2c3a95
CRs-Fixed: 3108987
Add support for a new QCA attribute to pass the puncturing
bitmap as part of the DO_ACS vendor command.
CRs-Fixed: 3102366
Change-Id: Ic0e54d82e48bae695baf3be4fd388ec15f81a416
In the new wifi specification 11be mode support is added, add a new
11be dot11 mode to qca_wlan_802_11_mode.
Change-Id: I9c5238ffaac96fcdf83e7c342a053dda7fc1f205
CRs-Fixed: 3050936
Add the attribute QCA_WLAN_VENDOR_ATTR_SCAN_PRIORITY to configure the
priority of vendor scan relative to other scan requests.
Add the valid values that this attribute can take.
Also, add an API to convert NL80211-based scan priority value to internal
scan priority value.
Change-Id: I6c62166c2dd6ea0880b332496b1e4bb0b41840c6
CRs-Fixed: 3044332
Introduce a new vendor command QCA_NL80211_VENDOR_SUBCMD_ROAM_EVENTS
that aims to configure/trigger the roam events from the driver.
Change-Id: Ifd9464cc8cb485890c8d171dc136d377f7a59fa1
CRs-Fixed: 3028404
Add a QCA vendor attribute to indicate agile spectral scan support for
320MHz mode. Add another attribute to indicate the number of
detectors used for spectral scan in 320MHz mode.
CRs-Fixed: 3045445
Change-Id: I4667e93e8074af122bfe9e08bededc439811afbf
Add new vendor command to configure monitor mode packet filter
parameters which includes data/mgmt/ctrl frame types.
Change-Id: Ie5e5d35b725e3d1b617edc1c889dc269b22a3673
CRs-Fixed: 3025489
Add new attributes for supporting MBSSID multi groups notifications
to qca_wlan_vendor_attr_mbssid_tx_vdev_status
(QCA_NL80211_VENDOR_SUBCMD_MBSSID_TX_VDEV_STATUS).
CRs-Fixed: 3028263
Change-Id: I9ce3f945cf4d3cf91af57363d7a25f14d5c90fa6
Add a new attribute into qca_wlan_vendor_attr_ll_stats_results to
support getting interface time slicing duty cycle info.
Change-Id: If6a34cd298c1cb41e0e29a24f2336eed76b98329
CRs-Fixed: 3020795
Update QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_TIME_TSF
TWT attribute to use it in TWT setup command to pass TSF value.
Change-Id: I410d72ff7771a3899ceb2487a8eb9dd7ad77299c
CRs-Fixed: 3029024
Add new QCA vendor attributes to get connectivity and roaming
related parameters from the driver for logging.
Change-Id: I8d4db7e43bcd2f406d124d7224a91338550420f0
CRs-Fixed: 3029276
Add a QCA vendor attribute to configure the driver to use
roam band set by userpace. This attribute is also used to
get the configured roam band from the driver.
Change-Id: I5ea7f9d12b2a01e1b4baa43e46342af34bebba49
CRs-Fixed: 3009747
Add the following vendor attribute to indicate the bandwidth to be used for
Spectral scan operation.
- QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_BANDWIDTH
CRs-Fixed: 3024152
Change-Id: I8ffc5f4d0106cb293ac81408e3b691fc29808080
Enhance QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD to fetch thermal stats
for different temperature levels from the driver to userspace. The
stats will be stored in the driver/firmware for predefined temperature
levels and will be reported to userspace when
QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD is sent with command type
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_THERMAL_STATS.
The thermal stats can be cleared from userspace by sending
QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD command with type
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_CLEAR_THERMAL_STATS.
Change-Id: I937bc89865df484a068c887d906df5a9502f1925
CRs-Fixed: 3016851
Add QCA new status vendor attribute
QCA_WLAN_VENDOR_TWT_STATUS_POWER_SAVE_EXIT_TERMINATE
to indicate the TWT session termination due to power save
exit request from userspace.
Change-Id: I515e4e8384b92b2556d72c4015252f075577f13c
CRs-Fixed: 3013360
Add QCA vendor attributes to configure the driver to enable/disable
the Broadcast TWT support and Rx Control Frame To MultiBSS support in
HE capabilities information field. This attribute is used for testing
purposes.
Change-Id: I22a2646b642d1e764e89b209e0c872ac113ca2ee
CRs-Fixed: 3012996
Add new QCA vendor attribute to configure the driver to enable/disable
the BSS max idle period support. This attribute is used for testing
purposes.
Change-Id: Ib63c81e34344e637b638638b1da323102c66d906
CRs-Fixed: 2994951
Add a QCA vendor attribute to configure the driver to use scan
request BSSID value in Probe Request frame RA(A1) for scan.
This attribute is used for testing purpose.
The driver saves this configuration and applies this setting to all
user space scan requests until the setting is cleared. If this
configuration is set, the driver uses the BSSID value from the scan
request to set the RA(A1) in the Probe Request frames during the scan,
else the broadcast address is set in the Probe Request frames RA(A1).
Change-Id: I0b26fde5f631e99f3e6d0ecf52918cd49d0153c7
CRs-Fixed: 2994935
Add TSF cmd to enable and disable automatic TSF report from the target
to the host.
Change-Id: I17b255299f55b8e78968d951824726d533a7c6e9
CRs-Fixed: 2991909
Add QCA vendor attribute QCA_WLAN_VENDOR_ATTR_CONFIG_FT_OVER_DS
to configure FT over DS to the driver/firmware.
Change-Id: I0745c27c6bc0a8d1075d753f1d898870479105f8
CRs-Fixed: 2968681
Introduce definitions for QCA vendor specific subcommands and
attributes to report DFS radar history.
Change-Id: I2140f636a42978b564fa0800484d3dc89865c2a0
CRs-Fixed: 2958699
User sets CFR data transport mode using vendor command
QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG. By default
CFR data transport mode is relayfs, user uses vendor command
attr QCA_WLAN_VENDOR_ATTR_PEER_CFR_DATA_TRANSPORT_MODE to set
transport mode QCA_WLAN_VENDOR_CFR_DATA_RELAY_FS or
QCA_WLAN_VENDOR_CFR_DATA_NETLINK_EVENTS.
If user sets QCA_WLAN_VENDOR_ATTR_PEER_CFR_DATA_RECEIVER_PID
attr in QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG vendor
command then hosts uses RECEIVER_PID to send unicast NL events
for CFR data.
Change-Id: I40e896fad8af24e761fcbedeba761f4a3815f0b8
CRs-Fixed: 2952095
Add a QCA vendor attribute to configure the driver to use Data or
Management frames for keep alive data. This attribute is used for
testing purpose.
Change-Id: I03b133f3d61c4d34b79e41ad72cfc24334380658
CRs-Fixed: 2960804
Add QCA vendor attribute to configure the driver to transmit the
Data frames with ER SU PPDU type format. This attribute is used
for testing purpose.
Change-Id: If11523ea3e6316c47181342c3acc8425da85ee1b
CRs-Fixed: 2960794
Add QCA interface to specify the RSSI thresholds separately for candidate
APs from different bands.
Change-Id: I51d2e7c4490fde3901a4e4e8ad31d9c18823637c
CRs-Fixed: 2951242
