Soc level exception descriptors limit is sent from FW in WMI service
ready TLV. Using that to check for exception packets limit
Change-Id: I99d20ecbb6a5bfd61b5a8a205775d34749eae880
In case of driver unload, there can be a race condition
since the timer for processing monitor status ring can run
in parallel to the unload time wow ack response handler,
which is also flushing all the monitor status ring entries.
To avoid this race condition, stop the monitor reap timer
as a part of target suspend, and process all the outstanding
entries in the montior status ring.
This will make sure that the monitor status ring is
processed from only one context at any given time.
Change-Id: If61327c73fdddc414b3957b69ae986f2a26bb803
CRs-Fixed: 2677812
Do a logical split of dp_soc_attach and
dp_pdev_attach into Allocation and initialization
and dp_soc_detach and dp_pdev_detach into
de-initialization and free routines
Change-Id: I23bdca0ca86db42a4d0b2554cd60d99bb207a647
- For directly connected peers, during peer de-auth,
a Single Peer delete request to the FW from host
should delete all AST entries attached to the peer.
- This optimization is aimed at optimizing host-fw
handshake messages
Change-Id: Iaebe2022f90ef9a10a6a0f37b21c409cf9e9ea39
CRs-fixed: 2647242
As part of componentization of packet capture feature
removed cdp ops of packet capture.
Change-Id: Iea07cbdc5782dee58cd1c87377363cc26479464f
CRs-Fixed: 2659439
Enhanced channel frequency response (CFR) based on monitor status
ring, need to enable mon reap timer before starting CFR and disable
the timer after stopping CFR capture. This change adds interface to
enable/disable monitor status ring's reap timer.
Change-Id: I843433ac07c4d55e14b42855ee22779eb7ecb678
CRs-Fixed: 2639307
Add following changes:
a. Add CDP API to config full monitor mode
b. HTT configuration changes
c. Init/Deinit changes for full monitor mode resources
CRs-Fixed: 2632442
Change-Id: I06db5194031b3ea0f0c1e5deda20df4bc0faa0b9
Send peer_id in peer_add_wds_entry API of ol_if_ops,
so that the dp peer doesn't need to be explicitly
retrieved in corresponding offload API.
Change-Id: Ia32d31946de43e9faa1970f4e74f2810f4125995
CRs-fixed: 2629475
Move RCC specific debug statistics to Data path
to avoid allocating nbuf for the PPDUs for which
MAC has not sent a Freeze TLV. Instead just update the
debug statistics at an earlier point irrespective of
MAC sending Freeze to PHY, to gather below information:
Status of number of PPDUs being captured by PHY
Status of MAC sending freeze TLV for the PPDUs
Update freeze reason for the number of PPDUs received
Add support to clear debug statistics at user's will.
Change-Id: I8def3ce1f3ecc0b169030704db3fb1fb1c0a20ee
CRs-Fixed: 2609604
Add code to move enum _ol_ath_param_t out from common DP code
and move it into OL layer
Change-Id: I92fa5f52c581a18449ab42da41ff5f6f1a2bc595
Crs-Fixed: 2560866
Currently mesh mode uses channel numbering which is derived
from APIs that don't support 6GHz channels numbering due to the
overloading of 6GHz channels with 2.4GHz and 5GHz.
Add support to obtain the correct channel number (and auxiliary
information like band and frequency) through the new APIs that
support 6GHz.
Change-Id: Ib0b39ebae2a22bd6b2b5d17b9058c3c2100e0d59
CRs-Fixed: 2605229
Peer key security type is set in cdp_set_pn_check,
this API is called in key install step, but only
update Ucast field even if in Mcast key install.
This may be set wrongly if Ucast and Mcast security
modes are different. Add a new API to set security
modes of differ key types separately.
Change-Id: Icaa63139d117de75633ca1f81eb618c6b9294b53
CRs-Fixed: 2617461
Increase the peer ref count before requesting for reo
queue stats and release the ref count after receiving
the queue stats on the reo status srng.
Change-Id: Ife3b87951e767414efa1bfb45486cd364578d2a7
CRs-Fixed: 2604862
Maintain packet counters for each peer based on protocol. Following 3
protocols are supported
* ICMP (IPv4)
* ARP (IPv4)
* EAP
Change-Id: I56dd9bbedd7b6698b7d155a524b242e8cabd76c3
CRs-Fixed: 2604877
A framework is added where the filters for every
mode are stored on a radio instance. Whenever a mode comes
up, it stores the filters in the radio and calls a
common API which iterates through all the enabled
mode filters and loops through them to create a
superset of filters which is sent to HTT.
This framework can be extended for new feature addition
which set filters for the monitor status and monitor
destination rings.
Change-Id: I9b739af2086bbe261b65c57af0a5bd867294f30f
CRs-Fixed: 2585872
In case of wlan suspend if packet log is enabled stop the
monitor reap timer and reap the pending frames in the ring.
Also in case of FW target suspend ACK status reap monitor
status ring. During target suspend FW will disable the monitor
status ring. This change will make sure no pending frames in
the ring during start of system suspend and the target suspend.
Change-Id: I350fa508f3ddd125d5e00a7fc60e89507ce8fb4e
CRs-Fixed: 2604389
Lithium HW can parse each MSDU when packets are enqueued to transmit
classifier and each MSDU can get enqueued to different MSDU-Queue.
By default, there are 2 queues per TID – UDP and NON-UDP. Based on
the flow parsing, packets will be queued to either of them.
Enterprise customers uses RAW mode frames which transmit classifier
would not be able to identify L4 protocol for UDP or NON-UDP queue
for encrypted frames.
Customer can also have different application based packets which needs
to be enqueued to differently prioritized queues. They can choose to
tag each MSDU based on application DPI and derive the flow priority
as below –
• UDP
• NON-UDP
• HI-PRIO
• LOW-PRIO
Customer needs API support from host which will provide an ast-index
based on a particular flow id given peer mac address. Based on the mac
address, host will find the associated peer and return the ast_index &
cache set number corresponding to the flow id from peer flow based ast
entry table. Customer will then program this ast-index and ast override
in transmit classifier CMD ring to enqueue MSDU to a specific
flow-queuein TQM.
Host API:
Input parameter – uint8_t *peer mac address, uint8_t flow id
Output – uint16_t ast_index
Change-Id: I79557c31532514ad5ec0c1848827a3e5cd91cdf2
Add ast-type as argument in wds peer create command.
This helps to identify the ast entry from the time when ast add is done.
Change-Id: Ia0c073cf8f2573608e6a84410dffee6edf9b064b
Provide an API to fetch required individual peer stats
from the data path peer stats instead of copying the
whole peer stats structure.
Change-Id: I1c9619bc7d9bb0e3e3df6d38cc5f4570869e31fe
Currently cdp ops are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev_id or vdev_id or peer mac address,
which will be used to get the respective handles,
and hence avoiding the unwanted access of the
handles if it has been deleted.
Also remove the ops which are used to store
and retrieve such handles, that no more needed.
- register_peer
- clear_peer
- change_peer_state
- peer_get_ref_by_addr
- peer_release_ref
- peer_state_update
- get_vdev_by_sta_id
- register_ocb_peer
- get_peer_state
- get_vdev_for_peer
- update_ibss_add_peer_num_of_vdev
- remove_peers_for_vdev
- remove_peers_for_vdev_no_lock
- copy_mac_addr_raw
- add_last_real_peer
- is_vdev_restore_last_peer
- update_last_real_peer
- peer_detach_force_delete
Change-Id: I4a41211464a30e018e8b73b8e9b91c7a509327b4
CRs-Fixed: 2541711
Currently cdp ops are given pdev/vdev handle
as its arguments, which is directly accessed
in those APIs. This can cause a race-condition
in access of the respective handles if it has
been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev_id/vdev_id which will be used to get the
respective handles, and hence avoiding unwanted
access of the handles if it has been deleted.
Also deleting few ops which stores and retrieves
such handles and adding ops to set/get pdev params.
- txrx_get_psoc_param
- wdi_event_sub
- wdi_event_unsub
Change-Id: Id089d9b6b4737d700d2436e2081291a3741affb5
CRs-Fixed: 2541658
Change set 2 of ctrl_ops APIs to replace pdev, vdev and peer
dp handles with pdev_id, vdev_id and peer mac address
along with dp soc handle
Change-Id: I3f180c9c360d564f0b229b447074ad23b7c0a737
Change set 1 of the ctrl_ops APIs to replace pdev, vdev and peer
dp handles with pdev_id, vdev_id and peer mac address
along with dp soc handle
Change-Id: Iedf6dea2215d3d04b2212c71c8ec8c7328c559e8
1. Move all LMAC rings to SOC from pDEV
2. Dynamically obtain lmac->pdev mapping while handling LMAC interrupts
Change-Id: Ib017d49243405b62fc34099c01a2b898b25341d0
Add monitor mode support to capture packets over 6GHz frequencies by
getting capture frequency from pdev.
Change freq type to qdf_freq_t.
Change-Id: I7b6edc43e254dc98a3c2939c369874bec9d16ddd
CRs-Fixed: 2568970
Currently in lithium FW is not always in datapath. As a result
can not provide all the wlan vendor extended stats. So as part
of this host provides some of the extended stats.
Change-Id: I876b6e905f7e25b7088f80f07e55e26a7a409241
CRs-Fixed: 2594797
Channel Frequency Response(CFR) captures FFT bins corresponding to a PPDU
received and this is relayed to user space application. Since FFT bins
alone will not be meaningful, additional information about the PPDU such
as Peer addr, BW, NSS, etc are extracted from multiple PPDU status TLVs
and passed on to userspace along with CFR data.
Host RX monitor status ring is configured during CFR enable and the host
subscribes to relevant PPDU TLVs that provides all necessary information
for CFR data correlation.
Change-Id: Ia8080fe96c330db42d371634ba4363eb36c05402
CRs-Fixed: 2593416
Currently cdp ops are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev_id or vdev_id or peer mac address,
which will be used to get the respective handles,
and hence avoiding the unwanted access of the
handles if it has been deleted.
- txrx_peer_unmap_sync_cb_set
- txrx_fw_stats_get
- txrx_get_ctrl_pdev_from_vdev
- txrx_get_mon_vdev_from_pdev
Change-Id: I4472dc0905edb7700acb4401b117c8876ba455f3
CRs-Fixed: 2541460
Change cmn_ops APIs to replace pdev, vdev and peer
dp handles with pdev_id, vdev_id and peer mac address
along with dp soc handle
Change-Id: I5716a87cad56b1dfe8dd56f193bbb6ff923a6af1
For cdp_hl_fc_set_td_limit() API, use channel frequency instead of
channel number.
Change-Id: I852f1fc192374a4b603e615664d7fb27ea984f5f
CRs-fixed: 2565737
Change cdp_host_stats_ops, cdp_wds_ops, cdp_raw_ops
and cdp_pflow_ops APIs to replace pdev, vdev and peer
dp handles with pdev_id, vdev_id and peer mac address
along with dp soc handle.
Change-Id: Ia956882535cc04e57a006905d46ccfe9d95bb731
Local peer_id is being cleaned up across DP, HDD and PS/WMA.
So, any references to local peer_id/sta_id will be replaced
by peer mac address and all interactions between the layers
will be based on peer mac address.
Cleanup local peer id usage from DP APIs.
Change-Id: I930e1c6a09092a373c093239632d6f310fee18e2
CRs-Fixed: 2529041
Local peer_id is being cleaned up across DP, HDD and PS/WMA.
So, any references to local peer_id/sta_id will be replaced
by peer mac address and all interactions between the layers
will be based on peer mac address.
Cleanup unusued DP APIs which are based on local peer_id.
Change-Id: Idd95bc640ca7e36a427be7202935034d4ed58979
CRs-Fixed: 2529026
Remove pdev and vdev control path handles from data path.
Instead send pdev_id and vdev_id along with opaque soc
handle in ol_if_ops.
Change-Id: I6ee083f07e464f283da0d70ada70a4e10e18e1b2
Add logic to queue and bundle packets before
giving it to scheduler to ensure predictive HTC
bundling for improvement in TX throughput.
Change-Id: Iab5066a46235ce7e41fd29c44a2ce0cfb04b1505
CRs-Fixed: 2574530
Currently cdp ops are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev_id or vdev_id or peer mac address,
which will be used to get the respective handles,
and hence avoiding the unwanted access of the
handles if it has been deleted.
- ipa_get_resource
- ipa_set_doorbell_paddr
- ipa_set_active
- ipa_register_op_cb
- ipa_get_stat
- ipa_tx_data_frame
- ipa_uc_get_share_stats
- ipa_uc_set_quota
- ipa_enable_autonomy
- ipa_disable_autonomy
- ipa_setup
- ipa_enable_pipes
- ipa_disable_pipes
- ipa_rx_intrabss_fwd
Change-Id: Ieb7e48d11a69a1e4a92a7114042b1db72d5f4b65
CRs-Fixed: 2540862
Currently the cdp apis are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles, if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev/vdev id or peer mac address, which will be
used to get the respective handles, and hence
avoiding the unwanted access of the handles, if
it has been deleted.
Converged bus_ops
- bus_suspend
- bus_resume
CRs-Fixed: 2539826
Change-Id: Id4d6ba16beae89f4052e72024ef8ce891ea33715
Currently the cdp apis are given vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the vdev_id or peer mac address, which will be
used to get the respective handles, and hence
avoiding the unwanted access of the handles if
it has been deleted.
- get_pn_info
Change-Id: I410938ed4c3878baa725b6fe3a785cbb99d5fdf4
CRs-Fixed: 2540837
Currently the cdp apis are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles, if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev/vdev id or peer mac address, which will be
used to get the respective handles, and hence
avoiding the unwanted access of the handles, if
it has been deleted.
Converged misc_ops
- tx_non_std
- get_opmode
- get_tx_ack_stats
- set_ibss_vdev_heart_beat_timer
- hl_tdls_flag_reset
- set_wisa_mode
- txrx_post_data_stall_event
- update_mac_id
- pkt_log_init
- pkt_log_con_service
- get_num_rx_contexts
- set_wmm_param
- flush_rx_frames
- bad_peer_txctl_set_setting
- bad_peer_txctl_update_threshold
- txrx_data_stall_cb_register
- txrx_data_stall_cb_deregister
- vdev_set_driver_del_ack_enable
- get_intra_bss_fwd_pkts_count
- mark_first_wakeup_packet
- register_pktdump_cb
- unregister_pktdump_cb
- pdev_reset_driver_del_ack
- runtime_suspend
- runtime_resume
CRs-Fixed: 2539811
Change-Id: I3080df033d6411d7078a322224b914bda2fddc0e
Currently the cdp apis are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev/vdev id or peer mac address, which will be
used to get the respective handles, and hence
avoiding the unwanted access of the handles if
it has been deleted.
Converged l_flowctl_ops
- register_tx_flow_control
- set_vdev_tx_desc_limit
- set_vdev_os_queue_status
- deregister_tx_flow_control_cb
- flow_control_cb
- get_tx_resource
- ll_set_tx_pause_q_depth
- vdev_flush
- vdev_pause
- vdev_unpause
CRs-Fixed: 2539825
Change-Id: Ic526dea5bb14471cdf67bc72bec061a26d623f79
