Adding two members including tx sgi_count in
host peer_extd_stats structure which is received from
the fw and populated to upper layer along with adding two
members to cdp_rx_stats.
Change-Id: Id45b2d0042d01771ac74a906d72c369c3dc31394
CRs-Fixed: 2147922
Scan on STA interface is taking around 10 secs to
complete. There is a 7secs expiry time used in nl
which could result in scan results received for
the first 3secs, which are from 2G channels, to
be flushed.
Fix is to not set offchannel simultaneous feature
capability, decrease the active dwell time for 2G
channels to 40msecs and increase burst duration
to 240msecs when GO is active.
Change-Id: If014b2115048018432943d863bbe184beb498408
CRs-Fixed: 2340516
Currently pointer of the vdev object is sent to the callback
hdd_wmm_is_acm_allowed to get the adapter. But this can't
be used to get the adapter. Instead pass the vdev id to get the
adapter.
Change-Id: I3cb2f58d09a263c77a3696a36e863cc4137c7821
CRs-Fixed: 2341799
there is a use after free case observed with the
recent changes to wait for a WMI WDS delete response
Basically the peer got deleted by the time we got
response for WDS delete and we are trying to access this
peer when trying to delete the AST entry from host.
Change-Id: I78215345ccd12d5bdd801fccf8d9f5cd196466de
qdf set print verbose level is using pr_info to log debug logs
and pr_info logs are logged on console hence change pr_info
to pr_debug to avoid logging debug logs on console.
Change-Id: I43ccef244c9576483f1520c0a5027ac88e0cbb07
CRs-Fixed: 2342962
Define new test config attribute to configure action frame
transmission in HE trigger based PPDU.
Change-Id: Iad53381ec75303ba0717292b1cff94e94cda3de5
CRs-Fixed: 2322602
Define new test config attribute to configure HE single user
PPDU transmission.
Change-Id: I4539ead98f31d0f0c4dee0534f6a8f29b8bd86cc
CRs-Fixed: 2322595
Add a new wifi test config QCA vendor attribute to configure
HE operating mode control field bandwidth and number of
spatial streams.
Change-Id: Ibe70d28329353e48c7bb323ab367c63be9706038
CRs-Fixed: 2320749
qdf_mem_copy() is called in util_scan_gen_scan_entry() to copy the ssid
into scan_entry using a length of WLAN_SSID_MAX_LEN. Because the length
of ssid is only checked against the maximum value this will result
in an OOB read of up to WLAN_SSID_MAX_LEN bytes.
Change-Id: I150e7c7a75e7134cab1c4abeb799578166400461
CRs-Fixed: 2341004
Add support for parsing AST entries to resolve the RA for
multicast enhancement (mode 6) and enabling access of the API to
the higher layers through the use of the CDP framework.
Change-Id: I909bea86b90c22f311484c0b2653dd7623971c24
CRs-Fixed: 2333014
Fix potentail memory leak when post message in TDLS module:
1. Add flush callback to hanlde memory free and release reference count;
2. Check the return status when post message and free the resource for
failure case.
Change-Id: I0a693ccb5704509a4220f26e024ce8c6c823890c
CRs-Fixed: 2341652
In case of STADFS feature, when STA vap detects the RADAR, it marks the
channel as RADAR and adds the RADAR found channel to both NOL and
NOL-HISTORY list.
After nol expiry, STA vap does the CAC before connecting to the RootAP if
the RootAP channel is present in the STA NOL-HISTORY.
Set nol_history_flag in regulatory component current channel list when STA
vap detects the RADAR.
Change-Id: Ic5d15d78409af15918185147fef8d5cbe87c1686
CRs-Fixed: 2337921
In case of STADFS feature, when STA vap detects the RADAR, it marks the
channel as RADAR and adds the RADAR found channel to both NOL and
NOL-HISTORY list.
After nol expiry, STA vap does the CAC before connecting to the RootAP if
the RootAP channel is present in the STA NOL-HISTORY.
Set nol_history_flag in regulatory component current channel list when STA
vap detects the RADAR.
Change-Id: I8d01f5830e6b4dd634b71c551ac347bc7d3d5c4c
CRs-Fixed: 2337921
As part of WIN BMI modularization, hif_bmi_register_callbacks
are removed from if_pci.c in qcacmn project. As a result,
MCL needs to invoke hif_bmi_register_callbacks in qcacld project.
Fix is to define hif_bmi_register_callbacks for SDIO and USB builds
so that SDIO and USB products can build when WLAN_FEATURE_BMI is
defined.
Change-Id: I559af0205dd4671214a8d7f2972fdba379e10b6a
CRs-Fixed: 2332250
Interrupt batch count configuration "dp_int_batch_threshold_other"
was initialized to wrong values, which was causing missed interrupts
from REO status ring.
Also remove the extra RXDMA2SW ring handling, which is currently
done in both UMAC and LMAC interrupt processing loops.
Change-Id: I9a9e951780356db6b491d1301d2c08ef1ac585d5
In ucfg_scan_unregister_requester even if caller provide an invalid
requester id, the index is unregistered without checking if
requester id is valid.
Validate the scan requester id before un-registering the index.
Change-Id: I0e946b8c1bdb87b7929745bcd646076d2b664c38
CRs-Fixed: 2343177
In case scan req is not serialized in some case failure callback
are not called and thus the requestor might not get this callback
and thus might not clean up its states.
Fix this by calling failure callback in case scan is not serialized.
Change-Id: Ife2f22a71fc3fcf60ef96209ec179594ab60c074
CRs-Fixed: 2343144
Fix possible mem leaks in NAN module when msg posting to scheduler
fails. Also setup schduler flush callback for NAN module to purge
messages during driver unload.
Change-Id: I8d034d9bc9a58af95f2c4330a6fc7423885bdae6
CRs-fixed: 2341213
Change I9a14a3defc61462bf4c7a8f0278e258603b781c7 moved a log in
wmi_control_rx indicating that a specific event Id has no associated
handler from debug-level to error-level. This resulted in excessive
logging, as the driver has no obligation to handle every event type
received from firmware and very well might not want to handle every
event type received from firmware. Restore the original debug-level to
the log.
Change-Id: I4b1118fef7e4752dbaaf796db2f9444927c7e178
CRs-Fixed: 2341953
Add debug logs for AST add, delete
and update functions under debug
level trace for debugging purpose
Change-Id: I2a1728fc97cdd00dd9bdabab5a6055e9f8464e65
To avoid potential memory leak, add flush callback for some of P2P
messages, handle post scheduler messages fail case.
Change-Id: If700eba689bb2423ca84fbba08f7434cc75dbd14
CRs-Fixed: 2341756
Using wds_en flag to control ADDR search flags in Transmit Descriptor was
causing DP to wrongly use ADDRY search instead of ADDRX search
on WDS repeater for DBDC repeater and SON scenarios.
Fix this by removing the use of this flag in dp_tx_vdev_update_search_flags
API
Change-Id: Id8ca40f926d58b8267e89d30c2b54cc42b4d4182
CRs-Fixed: 2335867
When scan is issued with 0 channels, use all valid channels
on underlying vap to scan. In essence 0 channel in scan
request is expanded to all supported channel list in scan
request by host driver.
Change-Id: Ie1677fa804b290bb1e4715244efb5789641260f4
CRs-Fixed: 2339615
Replace ol_if interface with WDI for dp stats updation to upper layer.
Define a new CDP API to get radiostats.
CRs-Fixed: 2326789
Change-Id: Ieaee2fe18fc9a0ad0e259e36f59529fe9bc4e208
Increase the number of repsonses per dbr event to 2 to
support Spectral scan in 160MHz mode
Change-Id: I47ee933b06d94a9a02f7d448b631dfdb99e297c4
CRs-Fixed: 2297498
Avoid processing tx rate stats if STATS_USR_RATE_TLV is not processed
in htt_ppdu_stats
Change-Id: Icce8ca0b351ae1ae784ba605d1d984dcdd033715
CRs-Fixed: 2316130
In extract_roam_scan_stats_res_evt_tlv(), there is potential
buffer-overflow due to no input validation of following event
parameters from firmware:
(a) Roam scan frequencies against maximum value of 50
(WMI_ROAM_SCAN_STATS_CHANNELS_MAX) and
(b) Roam scan candidates against maximum value of 4
(WMI_ROAM_SCAN_STATS_CANDIDATES_MAX)
To fix this, validate roam scan stats event parameters.
Change-Id: I866b492f7ccb48c4960ff25a9e817cbdb394509e
CRs-Fixed: 2335530
Fix compilation error due to uninitialized variable(write_index)
in hif_ce_bus_late_resume function.
Change-Id: Ia69e56cf74f2970dd0c047740d6499bb5ce07563
CRs-Fixed: 2317219
Requirement to provide various msdu retry stats to host:-
1. successfully transmitted msdus
2. Retried msdus
3. msdus retried for more than once
4. failed msdus
Change-Id: I4cd7dfceae16b4223df605fa174299858a8651c8
In case of 11w PMF tx frame, some target would dma write to this tx
buffer, it may cause smmu check fault.
Add a bi-direction map flag to mcl skb.cb[] for this special case.
Change-Id: I72a2c11abb9f3e7e8fb9c6f5290cd4f8d209b19a
CRs-Fixed: 2337204
Add iwpriv <interface> txrx_stats 29 and
iwpriv <interface> txrx_stats 30 to print wlan_cfg
parameters for both soc and pdev.
Change-Id: I666fe4fa999e82e92ea2961ab662e3e629b58bc7
CRs-Fixed: 2331949
Consider an AP up in channel 100 in VHT80 mode. On injecting radar
in channel 104, the current implementation displays "Radar found on channel
100", which is the primary beaconning channel. The requirement is to
display radar found information on the exact subchannel of the VHT channel
where radar was detected (which is channel 104 in this example).
Hence, using the radar found frequency offset to display the exact freq
offset from the centre frequency where radar was detected. This display
is only valid for real HW pulses injection. For bangradar, the frequency
offset is not available and therefore exact subchannel cannot be
calculated.
CRs-Fixed: 2321778
Change-Id: I49cdcd4f13dc1fbf12bc4a33048c13bc8ea3973f
- Add supprot to event 'WLAN_VDEV_SM_EV_ROAM'.
- WLAN_VDEV_SM_EV_ROAM - roaming event to notify the vdev
manager about the firmware triggered roaming.
Change-Id: I249664e72ba5fe0e13ddc8e59533489c69963f5f
CRs-Fixed: 2337795
TDLS peer has to be deleted before sending the TDLS disable command
to FW, otherwise FW may assert due to the invalid sequence of peer
delete and TDLS set state command.
So Delete TDLS peers for those the connection is in progress along with
the active TDLS peers before disabling the TDLS.
Change-Id: Ic52c44dea947095cfe5e4dfe36eec271b1f46867
CRs-Fixed: 2340759
Move WLAN fastpath featured CE service APIs to ce_service_legacy.c
since they are not used by any ce_service_srng.c APIs.
Change-Id: I7bb51025c477e8e2428479e41baed274ee4f7cae
CRs-Fixed: 2324003
Currently radar event log is cleared only during dfs_detach which happens
during wifi unload. On issuing "wifi or wifi down" command, the logs are
not cleared. During Spoof Radar Detection, the log counter values are
spuriuos due to accumulation of phyerror events. This accumulation of
events is either due to false radar detection or logs of the previous wifi
cycle. Hence resetting the dfs radar log counters in the below cases:
1) During vap delete
2) During CC/ Regdomain change.
3) After false radar detect.
CRs-Fixed: 2244562
Change-Id: I74745f61c634bab7f9c1a78ef8dea8da2ab1a997
Last frame received in scan before the connect is
beacon with NULL ssid with non zero length and ssid
is sent as NULL to supplicant after association. This
will result in supplicant to trigger disconnect
casuing delay in reconnection.
Fix is to consider ssid with zeros or spaces as null
ssid.
Change-Id: If96776ae85926948d714e975c3e9b4011e8a20b3
CRs-Fixed: 2330485
This change is to fix the regression issue caused by CR 2316935 which
dropped the change of CR 2307276 in the refactoring.
Update handling of WMI_SAR_GET_LIMITS_EVENTID for a possible OOB that
can occur if param_buf->fixed_param.num_limit_rows is greater than
actual TLV length of param_buf->sar_get_limits array.
Change-Id: Id633296d39bcaf4d1588963368630e69ff790ea4
CRs-fixed: 2339015
1. While saving ast_entry of type DA, use bss_peer.
2. Display the correct peer_mac_addr in ast_entry of type DA
Change-Id: Ic6150d6e3fc0b1c1274844ea6685df6b66afd811
CRs-Fixed: 2332417
