Add get parameters for features. These flags are
set in datapath vdev object and need to be extracted
outside datapath.
Change-Id: I4b4d8adcc523fc030bca699e0f0f9eb10475920c
CRs-Fixed: 3367490
REO module may hang when REO commands are queued after WoW enable WMI
sent to FW. Change is used to check WoW progress before accessing REO
CMD ring. If WoW is in progress, then defer REO commands.
Change-Id: I9cd8390e77ef33f98f84cb604f152e3f9a0e4203
CRs-Fixed: 3362608
Currently, we record TX musdu number and packet length, which falls into
three categories: from stack, from host and successfully transmitted. In
TSO mode, the msdu from stack will be divided into several fragments and
each of the fragment will be transmitted as an individual msdu. This change
will take TSO into account when it comes to the 3 forms of TX statstics.
Change-Id: Ie11cb7541b4e109609bf3104739a5e19f51dcc13
CRs-Fixed: 3361412
In case where memory alloction failure for RX TID return
appropriate status for CP
Change-Id: I96a3694b05f84034ebacd15d87e58cd1f59207de
CRs-Fixed: 3365642
Added support for parsing firmware to software tlv. which is mainly used
for populating frequency of the current packet.
Change-Id: I67c552e6d6b5caf9c12c34e553bad70b89b30c40
CRs-Fixed: 3270364
Special frames like EAPOL should not be dropped as it would cause
failure in connection. To prevent the dropping of higher priority
special frames, reserve a set of descriptors from the tx descriptor
pool.
Check the regular soc or pdev limit for the allocating tx descriptors
for the regular packets and use the reserved set of descriptors
only for the special packets.
CRs-Fixed: 3331359
Change-Id: I15532fb5e325ba6ad997090008bda8c52707a05b
Use the flag RX_PEER_INVALID_ENH for invalid peer
event instead of FEATURE_NAC_RSSI
Change-Id: I87e301a48b1ccdcd28f8e2eb0ba80b215efa384c
CRs-Fixed: 2969193
flow related fields like flow_idx_invalid and
flow_idx_timeout are needed to send the packet
to PPE_VP hence need to be saved in SKB CB
CRs-Fixed: 3359237
Change-Id: I2166566c53641f6569f69ff316d1bafb67a828d0
Use destination chip and pmac IDs from TLV.
Build flag for HW assist feature is not enabled yet,
so code is not exercised.
Change-Id: Ia9175d6597a7a2780f451d99a9f8ece7a16049e5
CRs-Fixed: 3262344
The stats to indicate the packet drop for EAPOL packets increments twice
in an instance. Fix this double incrementing of stats counter.
CRs-Fixed: 3365584
Change-Id: I524fa1a196452089c94acf50b52db0b00f562317
IOMMU map and unmap RX buffers into LPASS SMMU context
bank for LPASS to access RX buffers in direct link
usecases.
Change-Id: Ie72a008309e3abdf3fbc7198bb5d3af5e9497180
CRs-Fixed: 3356568
waikiki supports sending a packet from REO2PPE if a flow
rule matches. these changes are added to take advantage of
this HW feature when ever we are adding a flow rule
CRs-Fixed: 3359141
Change-Id: I8fedfcc759bc0427d71d3bb615e61ba38577c5c0
As per current design, dp_mlo_ctxt is allocated during the
initialization of module while the MLO grouping information is
understood after WMI_READY_EVENT. The same is deinitialized while
unregistering the module.
To ensure dp_mlo_ctxt exists per MLO group, bring the dp_handle
a layer below in the hierarchy into the mlo_setup_info and allocate
dp_mlo_ctxt after the WMI_READY_EVENT is received from all the SOCs
for a given group. Deallocate it after the WMI_MLO_TEARDOWN_COMPLETE
event is received.
CRs-Fixed: 3355405
Change-Id: Ic3102a34a8d44877827e2ff1f7da2e414b2b463f
To handle dp_mlo_ctxt assignments from the UMAC module,
moving the callers for attach and detach to the list of
MLO operations for multi chip.
CRs-Fixed: 3355400
Change-Id: Id743ec1086cf1b3ba0a3ec42212dc21c5a9ccc6b
rx user status pointer is not valid
memzero ppdu_info before ppdu TLV processing and
Assign valid user status pointer from ppdu_info
user status before rtap update.
Change-Id: Ib9f8bf356a8d4710d295716cf88b8cf6a37158cb
CRs-Fixed: 3341380
Currently the datapath stats do not print the
packet count for 320 MHz bandwidth.
Add support to print BW counters for 320 MHz.
Change-Id: Ic9579a1860e6aca442f7bc4a3b92930e8506e9bd
CRs-Fixed: 3359372
1. Change the names of parameters and functions related
to direct switch feature from ppe to ppeds
2. Remove the unused ppe_release_ring
Change-Id: I5a95b1273e338f354903af98158578ac65758a8a
CRs-Fixed: 3345097
Issue:
When DS mode is configured for a VAP
in both AP and STA (RDP 433), the tput reduces.
For instance, for an ingress of 7G
in standalone case, the egress rate is
1) 6887 Mbps when DS is enabled only in AP
2) 1900 Mbps when DS is enabled in both AP and STA
RCA:
With the help of debugs & proc/interrupts, identified
that we are not setting up the peer when the
device in STA mode due to AP mode check in
dp_soc_txrx_peer_setup.
Hence, the traffic is not flowing via DS
and so, tput reduces.
Fix:
Added changes to invoke txrx_peer_setup in
STA mode and DS mode will configured in that mode.
With the fix, traffic flows via DS, which
in turn improves the increased
Change-Id: Ib51e9a27e5078ed99160f213ddffed801c2e4ecf
CRs-Fixed: 3355603
Check size of the frag before passing
to trim function, which can lead to memory
corruption.
Change-Id: Icea102f9fef8c7333591337a93d32bc449704202
CRs-Fixed: 3354458
Program service code bypass to avoid
L2 new mac address learning exception
when fdb learning is disabled
Change-Id: I588a885aac1755cdf2ded5176b25d5ae9f533091
CRs-Fixed: 3354407
Requirement:
As part of serviceability for DS, display the number
of Tx descriptors currently in use by DS module
via “cfg80211tool athXX txrx_stats 260” like non-DS.
Snippet of log/code of Non-DS:
DP_PRINT_STATS("Tx Descriptors In Use = %u",
soc->stats.tx.desc_in_use);
Fix:
Introduced a new ops (dp_tx_ppe_ds_inuse_desc)
to display the current Tx desc in use.
dp_ppe_ds_inuse_desc API will be registered
to dp_tx_ppe_ds_inuse_desc in initialization
and it will be invoked from dp_print_soc_tx_stats API
to display the in_use desc via 260 command
Change-Id: I18971fc5d4cb5eb5437b012e3b89db7c9c2446b4
CRs-Fixed: 3352686
In the PPE-DS UL path, the PPE-DS flag is getting set in the buffer
in the EDMA Tx complete path.
This flag is getting checked in the WLAN Rx replenish path and the
data invalidate is being skipped, if the flag is set.
CRs-Fixed: 3344458
Change-Id: I4e10deec5b373ccc93b59432576eb70d49a9304d
Change interrupt timer threshold for ppe2tcl ring to 30 us
from existing default timer threshold.
Change-Id: Id6a2625c086af6c4c49188c0abdc8d24fb8bdfe5
CRs-Fixed: 3355208
1.Add check in Tx completion path to handle
mcast packets from all ML partner vdevs
2.Handle cases where a ML mcast vdev can be
deleted and started as NON-ML vdev and
viceversa by adding reset ML mcast conf.
3.Optimized Register configurations for Mcast
at Init/Delete and Start/Stop AP
Change-Id: Iab8a5a081e2e0377509574d362754d32c5b83df2
CRs-Fixed: 3350350
Suspect HW update WBM2SW ring HP, but the ring entry contents are
not updated accordingly which then host will fetch one stale ring entry,
this makes other TX packet are freed unexpectedlly.
Add change to detect this situation earlier, if HW cookie conversion is
done, then invalidate 2nd dword for upper 32bits of VA, so next time when
reap this ring entry contents to know if this desc is updated by
HW or not. if HW cookie conversion is not done, then compare the PA in
buff_addr_info with PA in current TX desc to check.
Change-Id: I351eb4f860216fc618ff28736d4832fcec45dcc5
CRs-Fixed: 3345935
Adjust low watermark refill for RxMON Source ring based on
ring_fill_level.
ring_fill_level varies based on use case of monitor like
enhanced_stats, full monitor.
CRs-Fixed: 3353181
Change-Id: I4e17eecbbd7f74071283d2c5615904310a3d7c77
Currently HP update can skip for few packets if the system suspend
is happening in parallel with tx. This could lead to SMMU fault if
the skipped HP update goes after tx desc force free.
Remove the tx pause check in HP updates and have the check before
calling dp_tx_send in case of intra-bss forward case. No special
handling is needed for non intra-bss case as we don't expect packets
from network stack after suspend.
Change-Id: Id4f2cefcc0a14e7c16438b9bda5cb1d55eb05050
CRs-Fixed: 3327818
Handle mlo case for ppe ds peer setup by
making sure the src_info is always extracted from
primary vdev.
Change-Id: Ie4b0d8f475966e8c4264cea5cf32f0dc95e76c4a
CRs-Fixed: 3346074
set rx_reo_queue_desc_addr_31_0 and rx_reo_queue_desc_addr_39_32 to 0
in hal_reo_shared_qaddr_write_be
Change-Id: Ib92775e0883b68f49c27e606e762384239bae955
CRs-Fixed: 3339043
Only 8 RX data TIDs are used, so HW stats query only needs to update
these TIDs info to save command executing time.
Change-Id: I04b65d19ddb3a9e43cb96b266708272769f7dcf2
CRs-Fixed: 3348771
Enable and register PPE2TCL and REO2PPE ring interrupts
for direct switch
Set interrupt timer threshold for ppe2tcl ring as 30 us.
Change-Id: Ida1ff6c3c2000f16f07960f7eae0d10edc337dc0
CRs-Fixed: 3341790
Add support for GET MLO Multicast API to check
if the vdev is primary multicast vdev.
Enhanced SET MLO Multicast API to reset primary
multicast flag for all partner vdevs.
Change-Id: Ic88949ce922bb1d0fd34349058d254de0d1f563c
CRs-Fixed: 3322523
Vlan Header is not initialize before passing it
to IPA driver, due to this some Vlan header fields
are junk and causing issue in IPA driver.
Fix is to initialize the header with 0
CRs-Fixed: 3342771
Change-Id: Ic29e0822f32bec5ea71702ceea75b7354caeda65
