New codec dma interfaces have been introduced to
connect LPASS and Codec macros. Add playback
and capture DAIs for Rx and Tx codec.
CRs-Fixed: 2281591
Change-Id: I26ba49660d62accb96ea7b063e00b35917dfbdca
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Fix overwriting of port ID in island mode mixer control.
Change-Id: Ibf650e94519ffde7655e14a88ccc9042b3a3544b
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Support two SPDIF input and two SPDIF output interfaces in AFE.
Change-Id: Ie2eb97e85c3b21cb112282dbdf0049a271e7cc93
Signed-off-by: Ralf Herz <rherz@codeaurora.org>
Add support for new A2DP profile aptX adaptive.
This is just like any other A2DP profiles.
CRs-fixed: 2272343
Change-Id: I219dec038e84b7b98ebb2d5233ddf576c8bbe70a
Signed-off-by: Sharad Sangle <assangle@codeaurora.org>
Add AFE HW CAL dep node in config and fix the set sampling rate
for codec dma interface
Change-Id: I9165a80da00bfb5b61bbf4f0391ff794d8fba352
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Fix for getting the parameters for codec dma interface
from mixer controls and apply to port config.
CRs-Fixed: 2248380
Change-Id: I351c32e868b8fd3fde3eabbeef89b625a7bf8598
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Update DAI driver to include VAD configuration related mixer
controls for the supported DAIs.
Change-Id: I7c1ff9a30c3afcf9bb66e40283e6909631df9aa6
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
New codec dma interfaces have been introduced to connect LPASS and
Codec macros. This change is to add codec dma interface dai driver
and corresponding dais.
Change-Id: I307950ff3cbfe80c966bd9de21803655bb46e05c
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Add support for adaptive bitrate with A2DP offload.
Set up Tx feedback path on SLIMBUS_7_TX from BT SoC
to LPASS. Configure AFE encoder and decoder for ABR.
Add bit width support to configure AFE port with
32bit for BT A2DP.
Change-Id: I8e0afaf52561e5dc70318240ba238fc42844501f
Signed-off-by: Aniket Kumar Lata <alata@codeaurora.org>
Move the tdm device property logs from probe function
to prepare function to print them only when tdm usecase
is started and not during bootup.
Change-Id: I3844709d501bf510620d6f20f270e30c68e78b78
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
For remove module(rmmod), update drivers
to cleanup resources and allow insert module
again without any issue.
Change-Id: Iddc6e5e11d986359afd3100bf3c5eab70cb1c1eb
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Signed-off-by: Meng Wang <mwang@codeaurora.org>
Add support for LDAC encoding in dsp to
enable LDAC encoder over split a2dp path.
CRs-Fixed: 2143086
Change-Id: Ia5ed981f5cd9cc61621d667362585ec7a7e64fa1
Signed-off-by: Preetam Singh Ranawat <apranawat@codeaurora.org>
Based on where the code is synced the driver should allow
both static and dynamic linked compilation.
Also remove __exit for modules loaded from another common
init/exit functions.
Change-Id: Ib58f152002aba3af4446f9bbd9b82c279212bd0a
Signed-off-by: Asish Bhattacharya <asishb@codeaurora.org>
Update quinary mi2s dai id to 4 and secondary mi2s playback
sd1 dai id to 5. Also update index of mi2s_config_controls
for primary, secondary, tertiary and quaternary mi2s.
CRs-Fixed: 2133890
Change-Id: I00997b79a148cf50b2a3f9acf6e44fe603e5c944
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Switch to DLKM for all audio kernel modules.
Change-Id: I6a96023a21f655f873531af9ace81f2b01eb0f58
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Enable all five TDM interfaces to configure clock frequency during
the runtime.
Change-Id: I066ea2034509dee2350205ee887dd3eeb6f5389b
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Add support for dais and routing for Quinary MI2S, AUXPCM and TDM
interfaces.
Change-Id: I50c3099a658998bab805c4c6a5aa447e85f3e7c6
Signed-off-by: Rohit Kumar <rohitkr@codeaurora.org>
TDM dai driver supports optional clk attribute configuration and
clk freq update. To configure TDM interface as PCM mode, the clk
attribute should be Q6AFE_LPASS_CLK_ATTRIBUTE_INVERT_COUPLE_NO.
Implement set_sysclk callback function to update Quaternary TDM
RX and TX clk freq.
Change-Id: I41edaa8d99325e9582e04ddb81a6ad5b5e4435bc
Signed-off-by: Cong Tang <congt@codeaurora.org>
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Add the corresponding 'cap_mask' to support 4 slots configuration in
CPU DAI driver to enable 4-channel QUAT TDM recording feature on SDM845.
Change-Id: I137d874b00fadde7513ab6c843f61becc74feac1
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Propagate the changes based on latest snapshot
for audio kernel source tree at below cutoff of
kernel msm-4.9 -
(040750bfa78 -
"Revert "ARM: dts: msm: Add DT node for aop-qmp
clock controller on SDM845 v2"")
CRs-Fixed: 2104096
Change-Id: I0927c40b3a188dbf892e7ec4c1c7810953724929
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
