This change updates the include file path for necessary dp
and dsc headers that have moved in upstream kernel.
File path changed in upstream:
include/drm/display/drm_dp_aux_bus.h
include/drm/display/drm_dp_dual_mode_helper.h
include/drm/display/drm_dp.h
include/drm/display/drm_dp_helper.h
include/drm/display/drm_dp_mst_helper.h
include/drm/display/drm_dsc.h
include/drm/display/drm_dsc_helper.h
include/drm/display/drm_hdcp.h
include/drm/display/drm_hdcp_helper.h
include/drm/display/drm_hdmi_helper.h
include/drm/display/drm_scdc.h
include/drm/display/drm_scdc_helper.h
Change-Id: Icb9a227c7464061f68fe60cbda6d93858fa768c5
Signed-off-by: GG Hou <quic_renjhou@quicinc.com>
Signed-off-by: Nilaan Gunabalachandran <quic_ngunabal@quicinc.com>
Currently the aux switch is disabled at the end of the disconnect
path which would include the wait time upto 5 secs becauase of usermode
cleanup. However, the PMIC module is expecting the aux switch to be
disabled within 400 msec after the disconnect is notified. If not, this
would trigger an LPD failure. This change moves aux switch disable
further up in the disconnect path, before waiting on completion of
usermode cleanup.
Change-Id: I42e0608f06127729a78de11631d16d0a3ca0d2b4
Signed-off-by: Sandeep Gangadharaiah <quic_sandgang@quicinc.com>
After freeing MST sim context memory the pointer isn't set
to NULL leading to unauthorized memory access. Along with
this fix, this change also defers checking sim device ports
pointer at a more appropriate place in the function call.
Change-Id: I20c09edbd454c9d491060815dc73bae34aab6b08
Signed-off-by: Sandeep Gangadharaiah <quic_sandgang@quicinc.com>
This change adds robustness to hpd notification by resending
it if there was no action in 2 seconds, just in case, the
first notification didn't make it to the usermode.
Change-Id: Iaf00669ec77e8c50618ee5618735a98518ad7f1a
Signed-off-by: Rajkumar Subbiah <quic_rsubbia@quicinc.com>
With real DP over Type-C sinks, DP driver requests access to USB
combo PHY from USB driver. But in DP SIM mode, there is no real
sink and PD management, so the combo PHY is managed by USB driver
and DP driver uses it without actually claiming it. If the USB
cable is unplugged in this scenario, USB driver notifies the
disconnection through an atomic notifier call. It does not expect
the handler to go into sleep, but the disconnect handler inside
DP driver has multiple wait for events and also sleeps to wait for
HW state updates.
This change passes a skip_wait flag to all the disable functions
to complete disconnect processing by skipping all processor sleeps
and event waits.
Change-Id: Ia98de0e7fa6b0573e644615ee59015914a93f4cf
Signed-off-by: Rajkumar Subbiah <quic_rsubbia@quicinc.com>
DP sim ports created during DP sim enable aren't cleared
during disable path. This would retain the last status of
the DP sim port or the connector. This would impact the
next iteration of DP sim test, if done without device
reset. This change will set the port number to 0 during
DP sim disable and clear the memory allocated for these
ports.
Change-Id: I386a62e87fcaf006db8dd18e5751b33bbe70fc9b
Signed-off-by: Sandeep Gangadharaiah <quic_sandgang@quicinc.com>
This change adds a debug node named 'crc' to drm_dp to read
the frame CRC values for DP controller and DP Sink. In order
to facilitate the immediate read of the CRC values when
accessed, it enables the CRC calculation on the controller
and sink automatically when the stream is enabled. In addition
to the frame CRC values it also reads the MISR values from
controller and PHY to validate the data flow from controller
to PHY.
Change-Id: I1acee2dba931e4635caf4a400e336a72c86e88bf
Signed-off-by: Rajkumar Subbiah <quic_rsubbia@quicinc.com>
Currently regdump framework for all the DP domains are registered during
init. But, unlike other modules in DP each SWI module is controlled by
its own clock and cannot be read without turning on the corresponding
clocks. Trying to do so might lead to unexpected behavior. This change
removes registering these nodes.
Change-Id: Ib20d7212bde24f3858558009e1679661731d16df
Signed-off-by: Sandeep Gangadharaiah <quic_sandgang@quicinc.com>
During MST scenario, plugging out all the downstream monitors connected
to the MST hub would trigger a disconnect handler which would cleanup
display structure. This isn't required since MST hub is still connected
and the display cleanup would be taken care during the actual MST hub
disconnect. Also, handling the disconnect immediately on port status
notification leaves the usermode in an invalid state where it assumes
the display is still enabled and results in commit errors.
Change-Id: Ia9a58fadd89bd05746da25f142b54b31e8567258
Signed-off-by: Sandeep Gangadharaiah <quic_sandgang@quicinc.com>
When a display is powered off, the DP driver currently clears the aux
state and forces it to OFF, expecting a subsequent hpd_low. But in MST
scenarios it is possible for individual displays to be unplugged and then
plugged back in without disconnecting the hub. In this use case, after
the unplug of last display, the aux state is in OFF, and on the
subsequent plug-in, the driver appends the ON flag, leaving both flags
to be set which is an incorrect state. This change removes this
assumption and properly sets the ON/OFF state on enable/disable
respectively.
Change-Id: I96355938a14c77fe958b86bd5f1dabad67584e4e
Signed-off-by: Sandeep Gangadharaiah <quic_sandgang@quicinc.com>
Change moves destroying dp audio workqueue outside dp session_lock.
As part of disconnect, USB driver uses atomic notifier which holds
rcu_read_lock and calls into DP disconnect callback which needs
session_lock. If another DP threads holds DP session_lock then
we block RCU operations.
Change-Id: I5d565ca149a3a34ebd5ede4fb662982d87454f16
Signed-off-by: Vara Reddy <quic_varar@quicinc.com>
During mode validation, DSC book-keeping logic is executed irrespective
of the panel DSC status. If the DSC blocks are available then the
corresponding mode is also set as DSC capable. This step is uncalled for
in a non-DSC panel scenario and might lead to unexpected behavior. This
change checks for panel DSC status before updating DSC book-keeping and
capability for the mode.
Change-Id: I30d6a4d7f3e772b7b13fcca6e318e96372a8becb
Signed-off-by: Sandeep Gangadharaiah <quic_sandgang@quicinc.com>
End section of the display post enable which is supposed
to do the cleanup before exit is also setting DP aux state
as powered on and notifying the connect as successful.
If there is a race condition between connect and disconnect
paths then the code execution would skip to the end section
since display is already disabled. In this case, the DP aux
state would be misleading. This change will set the status
and notify complete only during success case.
Change-Id: I1eca511e042d2dea619bf85fcc28adf9e0cc9536
Signed-off-by: Sandeep Gangadharaiah <quic_sandgang@quicinc.com>
Incorrect debug message is printed when mst con id is set to
the desired conn value. This change skips printing debug
message during this scenario.
Change-Id: Ia7161ff2e7b8fba2da9757360d0c756cbe5ef166
Signed-off-by: Sandeep Gangadharaiah <quic_sandgang@quicinc.com>
Addresses a race condition which could cause the RM to overcommiting LMs to
DP when multiple DP displays are used.
sde_rm_get_resource_info now uses the RM's mutex and assumes a null
encoder is not a built in display so that it can return an accurate
count of unreserved resources.
DP layer now maintains internal accounting of LMs in use to avoid
validating modes that have insufficient remaining resources.
Change-Id: I908c1597c1d651b6f9c9b74a34137f30087d8801
Signed-off-by: Alex Danila <quic_eadanila@quicinc.com>
This change sets lm_mask for dp connector based on
number of LMs allocated by RM. This mask will be
used during rm allocation and validation of dcwb
mixers for dp display.
Change-Id: I271af03da560587faf17446471bd6b81bb9e809b
Signed-off-by: Mahadevan <quic_mahap@quicinc.com>
DSC enable status is updated in DP panel struct as per the DPCD reg
read which is done at the start of the HPD ISR. However, there is a
chance that DSC is actually disabled later during mode query due to
shortage of DSC blocks. This status is stored as part of compression
info structure. This change checks for the latter struct to determine
the actual DSC status.
Change-Id: Id7cd4e65060f2ec939f945e9ac4f4e66260605d3
Signed-off-by: Sandeep Gangadharaiah <quic_sandgang@quicinc.com>
Add existing debug logs to ipc logging to be
accessed through debugfs.
Change-Id: Id9bfe61cb7921674eadc5635847c81a0fbdaef5c
Signed-off-by: Nisarg Bhavsar <quic_bhavsar@quicinc.com>
Some of the display status changes such as re-enable
or re-disable are not critical errors and can be ignored.
This change downgrades such errors as warnings.
Change-Id: I6800e534fc7fb825a472f37bb78a928e2e78d63a
Signed-off-by: Sandeep Gangadharaiah <quic_sandgang@quicinc.com>
Currently in an MST scenario, DSC resources are updated in
bookkeeping only when the corresponding stream is enabled.
This would lead to assigning already reserved DSC blocks to the
2nd stream, if 2nd stream is validated before the 1st stream is
enabled. This change would update the bookkeeping as soon as the
mode is validated.
Change-Id: I7f89a16639efcde3e5dfdf423715ed354e1de66a
Signed-off-by: Sandeep Gangadharaiah <quic_sandgang@quicinc.com>
Avoid various possible nullptr dereferences.
Addresses various issues highlighted by static analysis.
Change-Id: I36d34d610b37bf2799a7e34cd1de8b909b5c0ae4
Signed-off-by: Nisarg Bhavsar <quic_bhavsar@quicinc.com>
The software mvid/nvid values represent the ratio of mode clock
to link clock. Currently we are converting the link clock to vco
clock, get the ratio of vco clock to mode clock and then adjust
the resulting values to get the ratio of link clock to mode clock.
This change simplifies this logic by directly using the link
clock to get the ratio and uses fixed point arithmetic to scale
the resulting mvid, nvid values to meet requirements.
Change-Id: Ifdfa27edb73d2db6381e592db219e75806d6bdc7
Signed-off-by: Rajkumar Subbiah <quic_rsubbia@quicinc.com>
Currently the tpg_ctrl node takes a boolean flag to enable or disable
test pattern output on DP controller. It always sets the pattern type
to a default pattern. This change updates this interface to accept an
integer value so the user can select different patterns supported by
the controller.
Change-Id: I399091a57f353b2fb8d29a48a8390898ca9afb55
Signed-off-by: Rajkumar Subbiah <quic_rsubbia@quicinc.com>
drm device pointer is not set in dp aux object which
is leading to a warning message during device bootup.
This change will set that pointer before registering
aux object.
Change-Id: Ib79ece56d7d5efd098e06104eb020648d1d075f7
Signed-off-by: Sandeep Gangadharaiah <quic_sandgang@quicinc.com>
Modified the pre-emph values for S3P0 & S1P1 in HBR/RBR
table. Also, modified BG timer value as per the latest
HPG changes.
Change-Id: Id9088d3cfe73cb14518dcf490676d92c54925793
Signed-off-by: Sandeep Gangadharaiah <quic_sandgang@quicinc.com>
Because of changes to ref clock frequency, few of the pll
reg values are different for kalama compared to palima.
This change differentiates between these two 4nm versions,
based on pll revision and also introduces a pll reg table
to differentiate the values.
Change-Id: I016330ded10ab334012daa8cc288a8cd5c039f58
Signed-off-by: Sandeep Gangadharaiah <quic_sandgang@quicinc.com>
DP PLL driver is the clock provider for link_clk and pixel_clk source
clocks. Once the PLL is configured, the clock rates for these output
clocks must be explicitly set using the clk_set_rate() API so that
the clock framework can correctly compute any MND values required
to satisfy the requested rate at the branch clocks that source from
the PLL output clocks.
Change-Id: I14f8f58333ac5ba3f547d12a123cb5e5f05c6005
Signed-off-by: Aravind Venkateswaran <quic_aravindh@quicinc.com>
Change removes the dependency of reading MVID and NVID settings
from dispcc registers and calculates the values locally in displayport
driver.
Change-Id: I9ad66aea44a3cbc0f739060c49e23d389022a48a
Signed-off-by: Vara Reddy <quic_varar@quicinc.com>
Swing/Pre-emph, SSC, and CLKBUFLR values updated to match
latest changes as per kalama HPG.
Change-Id: Iae96b38f0f8c39280081ae43b41f73ea10f6ddb7
Signed-off-by: Sandeep Gangadharaiah <quic_sandgang@quicinc.com>
Signed-off-by: Vara Reddy <quic_varar@quicinc.com>
On kailua onwards USB3 DP SSPHY power is control using GDSC.
This change adds support to vote for GDSC when displayport
driver is active.
Change-Id: I2e741f2091018f5dae9a1e7e886179bc6b982d40
Signed-off-by: Vara Reddy <quic_varar@quicinc.com>
* quic/display-kernel.lnx.5.10:
disp: msm: sde: avoid error during fal10_veto override enablement
disp: msm: update copyright description
disp: msm: sde: configure dest_scaler op_mode for two independent displays
disp: msm: dp: updated copyright set for 4nm target
Revert "disp: msm: sde: consider max of actual and default prefill lines"
disp: msm: sde: Reset backlight scale when HWC is stopped
disp: msm: dp: avoid duplicate read of link status
disp: msm: dsi: update vreg_ctrl settings for cape
disp: msm: fail commit if drm_gem_obj was found attached to a sec CB
disp: msm: dp: updated register values for 4nm target
disp: msm: sde: update framedata event handling
disp: msm: dsi: Add new phy comaptible string for cape
disp: msm: sde: software override for fal10 in cwb enable
disp: msm: update cleanup during bind failure in msm_drm_component_init
disp: msm: sde: dump user input_fence info on spec fence timeout
disp: msm: sde: add null pointer check for encoder current master
disp: msm: dsi: enable DMA start window scheduling for broadcast commands
disp: msm: sde: avoid alignment checks for linear formats
disp: msm: reset thread priority work on every new run
disp: msm: sde: send power on event for cont. splash
disp: msm: sde: always set CTL_x_UIDLE_ACTIVE register to "1"
disp: msm: use vzalloc for large allocations
disp: msm: sde: Add support to limit DSC size to 10k
disp: msm: sde: add tx wait during DMS for sim panel
disp: msm: dsi: add check for any queued DSI CMDs before clock force update
disp: msm: sde: correct pp block allocation during dcwb dither programming
disp: msm: sde: avoid setting of max vblank count
disp: msm: sde: add cached lut flag in sde plane
disp: msm: sde: avoid use after free in msm_lastclose
disp: msm: sde: update TEAR_SYNC_WRCOUNT register before vsync counter
disp: msm: dsi: Support uncompressed rgb101010 format
disp: msm: sde: update idle_pc_enabled flag for all encoders
disp: msm: sde: flush esd work before disabling the encoder
disp: msm: sde: allow qsync update along with modeset
disp: msm: dp: avoid dp sw reset on disconnect path
disp: msm: sde: consider max of actual and default prefill lines
disp: msm: ensure vbif debugbus not in use is disabled
disp: msm: sde: update cached encoder mask if required
disp: msm: sde: while timing engine enabling poll for active region
disp: msm: enable cache flag for dumb buffer
disp: msm: sde: disable ot limit for cwb
disp: msm: sde: avoid race condition at vm release
disp: msm: dsi: set qsync min fps list length to zero
disp: msm: sde: reset mixers in crtc when ctl datapath switches
disp: msm: sde: update vm state atomic check for non-primary usecases
disp: msm: sde: reset CTL_UIDLE_ACTIVE register only if uidle is disabled
Change-Id: If480e7f33743eb4788549f853ba05e744ecb38d3
Signed-off-by: Narendra Muppalla <quic_nmuppall@quicinc.com>
This change updates copyright description with correct
license marking as per the guidelines.
Change-Id: Ia74b721e78afcc7f8e88bcbccfcf15430111ec37
Signed-off-by: Yashwanth <quic_yvulapu@quicinc.com>
Changes include support to update necessary copyright
information to dp file for 4nm target.
Change-Id: Iebb2cc542f7b9262073936f12d55eb1be788e757
Signed-off-by: Soutrik Mukhopadhyay <quic_mukhopad@quicinc.com>
During link training, after the swing/preemphasis is updated, the driver
is supposed to poll the link status on the sink and quit once the
LINK_STATUS_UPDATED bit is set and also latch the next set of
swing/preemphasis requested by the sink. But currently, the driver is
exiting the loop only when the LINK_STATUS_UPDATED bit is cleared. So,
it also latches the swing/emphasis request from the second read.
Typically, the SW read is slow enough that the bit is set on the first
read. The driver then reads the second time and exits the loop, since
the bit would be cleared then. In most cases, this doesn't affect
the training sequence, since the swing/preemphasis request for next
attempt is retained on the second read. But, atleast in one
specific case, it was observed that the swing/emphasis request
gets reset along with LINK_STATUS_UPDATED and so the driver ends
up missing the actual request and latches incorrect values instead.
This causes link training to fail as it keep retrying with the
same values that it starts with.
This change fixes the exit condition check so the driver quits the loop
as soon as the LINK_STATUS_UPDATED bit is set.
Change-Id: I7f5d9c6b30d48e113aef628d2ab2c1bd972fe743
Signed-off-by: Rajkumar Subbiah <quic_rsubbia@quicinc.com>
