Add event id to support Neighbor report and beacon report for
diag logging.
Add EVENT_WLAN_NBR_RPT event to send Neighbor report diag logs
and EVENT_WLAN_BCN_RPT event to send Beacon report diag logs.
Change-Id: I5c7207667e2bad803389e160912357bc87196131
CRs-Fixed: 3370803
- To invoke the API wlan_send_tid_to_link_mapping from other
files, change its static definition and add a function
declaration.
- Remove repetitive logging of T2LM params in
wlan_mlo_parse_t2lm_info API.
- HMT STA host needs to send T2LM mapping info to FW only
on one peer instead of both peers in case of WKK.
Thus, add new API under MCC flag to address this issue.
The original changes will remain under else case.
Change-Id: I2495fddca7dc5da253a6d10ab41b70cf7f627156
CRs-Fixed: 3373326
Add debug logs in the MLD peer create/delete path
to help debug any issues with MLD peer leak.
Change-Id: I63126d9b86f3179a88809836371fc765d340b6d8
CRs-Fixed: 3379148
Currently there is no recovery reason for host wakeup due to pagefault.
With this change add QDF_HOST_WAKEUP_REASON_PAGEFAULT for host wakeup
because of pagefault failure.
Change-Id: Id74a79786009f529a9ec2cf3464ea7adcd67895c
CRs-Fixed: 3378910
The kernel-doc script identified some kernel-doc issues in the htc
folder, so fix them.
Change-Id: I6523448836f4a0cdd1ff174634fce287b2d85d6a
CRs-Fixed: 3377576
The kernel-doc script identified a couple of kernel-doc issues in the
gpio folder, so fix them.
Change-Id: I9d468ee4cedd3cf3b3f0c4d7cb3ad192089b6b30
CRs-Fixed: 3376420
- Replace T2LM array in wlan_t2lm_context structure with established_t2lm
and upcoming_t2lm structures
- Mapping switch time is different for each AP vdevs. Hence, store the
value in vdev_mlme_proto_ap structure.
- Fix a few issues seen in mapping switch time expiry and expected duration
expiry.
Change-Id: Id69badc3f4bf5e5e741691348488369008ffc4e9
CRs-Fixed: 3369279
Enable intra bss fwd offload on vdev by default
by sending wmi command to firmware.
Change-Id: I5fcc828f8360c93a7adbcf8f1f2cb7cc58593a49
CRs-Fixed: 3362569
The current channel list alone is not enough to represent the
capability of the chip or device. Given a channel, in many
cases it may be required to know all the power modes that are
supported by this channel.
Remove wlan_reg_fill_channel_list to use the super channel API
wlan_reg_fill_channel_list_for_pwrmode.
Change-Id: I9645caff236af786b6376608be2aa56a28fe689c
CRs-Fixed: 3357161
Special vap on AR9887 (ap_monitor) is used as both monitor and
AP mode. During channel change on DFS channels, vap is not up till DFS
CAC timer completes and hence cfg80211tool is not releasing the
rtnl_lock.
For Scan radio, CAC timer can be disabled on DFS channels.
Change-Id: I6142325892401e3a374760179ec7e4e206296f33
CRs-Fixed: 3341288
Check peer count to decide if peer filtering is required or not.
This is required to support peer filtering for full monitor mode.
Change-Id: Icb3c0fc834795dbbbfd3a7899b3b733409f5f70d
CRs-Fixed: 3372600
The kernel-doc script identified many documentation issues in
the wmi folder, so fix them.
Note that in quite a few cases there is duplicate documentation in .h
and .c files, and in those cases remove the documentation from the .c
files since the interface should be documented, not the
implementation.
Change-Id: I097d5b8e8f0ba09046b7b8abe338d05a00f8cc7e
CRs-Fixed: 3372831
Add changes to move ioremap of PMM SCRATCH register outside
interrupt context, as ioremap in interrupt context in not valid.
Change-Id: I0fa645c55e10a5241011a1f4ffdccdca48c50d29
CRs-Fixed: 3371194
Currently the debug log for NULL peer, just gives
the REO error code info, which may not be relevant
if the error source is not REO.
Dump both REO and RXDMA push reason and error code
if NULL peer is encountered in WBM error handler.
Change-Id: I95dabb8c9de1bf95081ccb389805d3ef3376915a
CRs-Fixed: 3374313
Cleanup the tx desc clean up logic used in
direct switch and umac reset cases.
The excess code being removed tries to
get the next descriptor address in boundary
conditions is not useful, as the descriptor
extracted this way will be overwritten
immediately in the beginning of next iteration
of the loop.
Change-Id: Ibcd873719929b94147152ff48205774d3ed4f452
CRs-Fixed: 3371831
In MLO scenario where start response for partner ML AP vdevs are
processed simultaneously on different CPU cores, the order in which
the vdev sm lock is acquired may lead to deadlock.
To fix add change to dispatch the MLO_SYNC_COMPLETE under mlo_dev_ctx.
Change-Id: I86ef51fcc8d51277163fcc5a6afdee6d873f2e63
CRs-Fixed: 3368033
remove unused var and declarations in
dp/wifi3.0/monitor/2.0/dp_mon_filter_2.0.c
CRs-Fixed: 3284798
Change-Id: I602d0e1ce5a74b981f34f7d5d4a5cb83693f62db
remove unused var and declarations in
dp/wifi3.0/monitor/1.0/dp_rx_mon_status_1.0.c
CRs-Fixed: 3284798
Change-Id: Iea3f8e2213fef9d10fe20c90c2ac0017f7d17692
remove unused var and declarations in
dp/wifi3.0/monitor/1.0/dp_rx_mon_dest_1.0.c
CRs-Fixed: 3284798
Change-Id: Ibfeaca928fe43e6f0cc5b52a2114708810c09805
remove unused var and declaration in
dp/wifi3.0/monitor/1.0/dp_mon_filter_1.0.c
CRs-Fixed: 3284798
Change-Id: I289aac6ae32c22539c98d02673b9af9a48d46192
Added changes in wifi module to update PPE2TCL & REO2PPE ring
size as 8k to improve the perf for MLO case
Change-Id: I6ca241c21c44b4cda8869e5e2ae9a4a906d98fc8
CRs-Fixed: 3365361
As per kernel doc, this file does not have proper
comments and spelling mistake are present, due to
which WLAN Automated code review for kernel-doc
checker is giving error.
Fix is updating the comments based on Kernel-doc
guidelines and correct the spelling mistake.
Change-Id: I7f8b8505b9810de2678ecfa893be78c0451cf612
CRs-Fixed: 3368472
Add API to check state of all mlo vdev to avoid roaming and disconnect
race issue.
Change-Id: Idc9a9a57f433aeff185fe78826faa84e08c09ddb
CRs-Fixed: 3372132
Add support for mlo groups in mlo soc/link setup and teardown
sequence participating in mlo.
Change-Id: I2b431b0ee1e5816b92ad183b52ad2998eb5bb46c
CRs-Fixed: 3343170
Currently in dp_peer_find_id_to_obj_add while adding peer to soc
peer_id_to_obj_map list, if peer entry is already present for the
peer_id due to no umap event for older peer, driver calls QDF_ASSERT
and returns, As QDF_ASSERT is NOP it results in older entry still present
in the table. which results in peer leak issue as while doing peer unamp
driver gets peer from soc peer_id_to_obj_map table based on peer id,
Since older entry is still there older peer will be freed and new peer
unamp will not happen.
To fix the issue call qdf_assert_always if peer entry is already present
for peer id which will always assert and add additional logs to print
peer information.
Change-Id: Ic777e9c7881fcbc67f54002bd619a8e6d52de126
CRs-Fixed: 3369736
