Firmware doesn't expect any vdev commands from host while RSO stop
is happening. It sends a response to the RSO_STOP command once
it's done with cleanup. Host needs to run a timer and wait for a
maximum of 6 seconds for the response. Host can stop the timer and
allow the commands to firmware in the below cases,
1. RSO_STOP response with success status
2. RSO_STOP response with HO_FAIL status followed by
HO_FAIL event: Host needs to wait till HO_FAIL event is
received
If firmware doesn't send any response in the 6 seconds wait, issue
a recovery to help to check the firmware state.
Change-Id: I4577f9b0aac71c0c86bd32b59e69d9527bf107b9
CRs-Fixed: 3106032
EHT operation IE contains disabled subchannel bitmap, which providing
a list of subchannels that are punctured within the BSS bandwidth.
Throughput is affected if subchannels are punctured, refer to system
document to get new bandwidth score for different puncture pattern.
Change-Id: I91b9a7ec4331e78373440d4c97eb9f1ba6c45b4c
CRs-Fixed: 3098009
When do SAE-5.7.3 certification test case, STA will choose non SAE-PK
AP to connect which is wrong expected result, non SAE-PK AP beacon
will carry with QBSS IE that contributes more score than SAE-PK AP
score config.
Fix is to give SAE-PK AP more score to pass SAE-5.7.3 certification
case.
Change-Id: Ib3e516ccfa673e19f9bf0869aeffe4f5b1862a71
CRs-Fixed: 3101317
If the MLO module is sending link disconnect from the north, retain its
disconnect source. If it is a southbound disconnect, update the source
to be from MLO manager. This is needed so some legacy modules handle the
disconnect properly and send vdev stop when appropriate. Also make sure
that the SB disconnect will be processed if the link is in connecting
state.
Change-Id: I6644751934697496147b9177ee7beab4d7355e10
CRs-fixed: 3086012
When processing a peer or southbound disconnect on the non assoc link,
there is a vdev stop issue due to the correct state not being set. For
this link, set the disconnect source as MLO instead of passing it down
from the caller.
Change-Id: I8db444e7c80659a1a1026a53326e99c96ef631f0
CRs-fixed: 3040658
STA connection with OWE transition mode SSID fails due to join
failure timeout. Since, it is OWE transition mode, STA needs probe
response for join success.
The scan table entry of the candidate BSSID is sent in the join request.
This entry is used to create session and to send probe request to AP.
In case of OWE transition mode, the beacon carries wildcard SSID.
Therefore, the scan table entry also has wildcard ssid. Also,
during the candidate selection, scm_ignore_ssid_check_for_owe check
allows even entries with wildcard SSIDs to be selected as candiates
for OWE transition mode.
The join request with Wildcard SSID in the scan entry is used by LIM
to create session, as well as to send probe request.Therefore,
the AP doesn't respond to the probe request with wildcard ssid
leading to join failure timeout.
This change adds ssid from connect request to the cm_vdev_join_req,
which can be used by LIM to create session and to send probe request
whenever the SSID in scan entry is wildcard.
Change-Id: If43d7e8a65bc3e37d67e22609932cf18f804f0ab
CRs-Fixed: 3041142
When getting rnr IE information, instead of getting rnr pointer through
input parameter, we can just return rnr pointer.
Change-Id: I57f683eb86bb813018a38fa3a6286e9b6e40037f
CRs-Fixed: 3025194
It is mandatory request to check security mode in 6Ghz band,
so enable check_6ghz_security by default. Keep default disable
for WIN as requested.
Change-Id: Idcc4cb9add98ad4bda8e4357e83460ca25221692
CRs-Fixed: 3006930
Currently driver has only one name for an INI, with
this change add second name as well for few INIs based on
new requirement.
Change-Id: I67bd50652c3be7912c516b81d40f6a1ea7a7b90a
CRs-Fixed: 3007172
Refactor connection manager command timeouts to handled unexpected
timeouts in VDEV/PEER SM.
Also flush the req list before deinit to avoid memleaks due to these
timout, if SM is not handled properly.
Change-Id: I6cd1857464691838c75b1ceda32f94ad4cda46a2
CRs-Fixed: 2971466
Define the following functions for MLO operation:
Peer create and delete
STA/SAP up and down
VDEV create and delete
Is MLD AP or STA
Change-Id: I5c9b3276b8dbb4b2a3f055480cab4a865b8af946
CRs-fixed: 2935769
Add APIs to support customer scan filter and candidate list
sorting based on user perference
Change-Id: I9b5d46c7851a0afd4513f50c50c43baf26c29d0c
CRs-Fixed: 2896741
Structure wlan_cm_roam_resp and wlan_cm_connect_resp are identical
structures and in current code these structures are used for connect
and reassoc functionalities with different functions as these are
identical structures and only one structure can be used to reduce
the duplication of the code.
To address this code duplication issue replace wlan_cm_roam_resp
structure with wlan_cm_connect_resp.
Change-Id: I90949c25f46acd2fa78cebb70c9a04f0718b90c4
CRs-Fixed: 2875232
The default value of ini is_bssid_hint_priority change 1 for AP
and 0 for non AP in documentation.
Change-Id: I4181ba5b72a5d6f013be74adaa579fb23370e25c
CRs-Fixed: 2869604
Add is_wps and is_osen in connect req to avoid parsing assoc ie
multiple time to get the info.
Change-Id: Iae0130e946d02cdacfec986770ef25b3d6b57aa4
CRs-Fixed: 2859665
With current implementation host does not allow
6GHz AP for WPS security, add a change to allow 6GHz AP for WPS.
Change-Id: I9e330f2984a716bb56e47313b65eedb4a1a0e216
CRs-Fixed: 2814259
Add enum to indicate the connect or disconnect request initiated
due to a config change.
Change-Id: I68e058f37f00b548076874c97903dc78d4f4cb25
CRs-Fixed: 2826533
Add the following new API for the connection manager
to get the active request type, active connect request,
active disconnect request
wlan_cm_get_active_req_type
wlan_cm_get_active_connect_req
wlan_cm_get_active_disconnect_req
CRs-Fixed: 2821225
Change-Id: I8b2a2edfafe09c5642c376f45d4b2ae349145dbf
Currently the connection manager queries the
blacklist manager about the action to be taken
and if all the candidates of a certain SSID are
blacklisted then the connection would be rejected.
There are various types of blacklisting, some
can be overridden and some have to be strictly
followed.
Fix is to overide the blacklist candidate and
connect to it if no other candidates are suitable
for connection.
Change-Id: I84358df5f94d4c82989bf81412355f312320dc0b
Crs-Fixed: 2825519
Add logic to
- Check if connect req freq is 6Ghz and security
is not allowed for 6Ghz, reject connect.
- Ignore 6Ghz APs if connect req security is invalid
for 6Ghz
Also added user config key_mgmt_mask_6ghz mask
to allow specific AKMs, by default all are allowed.
Add added user config check_6Ghz_security to enable
security checks as per spec.
Change-Id: I37518731faa4de67a49853e5ac544efa3b3ce1d6
CRs-Fixed: 2813013
Add change to enable bssid hint scoring for candidate selection in
connection manager.
Change-Id: I40a120781c93bf8fb09ec9591a94ee1484bb1a0c
CRs-Fixed: 2801397
There is a possibility that driver already has a vdev
with the mac address same as bssid, in this case sta
should not connect to this AP as it may lead to undefined
behavior.
To address above issue add a check to compare bssid with
already existing vdevs before connect start.
Along with above changes add few renaming changes also.
Change-Id: Ia12be0b392a01bf935b5261e505290064de68805
CRs-Fixed: 2809147
If ini vendor_roam_score_algorithm=1, for initial connect, select
candidate by estimated throughput(ETP). Calculate ETP of all
bssid of ssid selected by high layer, and try to connect AP by
order of ETP, legacy algorithm with following Parameters/Weightage
becomes useless. ETP should be [1Mbps, 20000Mbps],matches score
range: [1, 20000].
Add 11ax support besides 11ac/11abgn.
Change-Id: I3f55d2ae37801128b8a66f6d5c2ac55cb11a56d0
CRs-Fixed: 2704154
Move disconnect wait logic from osif to connection mgr, so that
MLO/IF manager can use the wait logic for disconnect
during vdev delete.
Change-Id: Ied2bbcfd6a532209f8008499424f94acc41efc0e
CRs-Fixed: 2800990
Add connect params in osif connect request to pass scan IE and other
params from legacy to be used in connect request.
Change-Id: I83721023362ff2405727316f090671468200b362
CRs-Fixed: 2793280
