Currently driver doesn't support CMD_STOP in open state.
But according to v4l2 std, the call to VIDIOC_DECODER/ENCODER_CMD()
should not fail even if any of the queues is not streaming,
but at the same time it will not initiate the Drain sequence.
So with this fix, not rejecting CMD_STOP in open state but
at the same time not initiating drain sequence.
Fixes: v4l2-compliance :
VIDIOC_(TRY_)DECODER_CMD on decoder.
VIDIOC_(TRY_)ENCODER_CMD on encoder.
Change-Id: Ie94288cca88009a8a945bd7bca70d04239a4678c
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Decoder needs to support VIDIOC_TRY_DECODER_CMD and
Encoder needs to be support VIDIOC_TRY_ENCODER_CMD.
Partially Fixes: V4l2-complience:
testDecoder(VIDIOC_(TRY)_DECODER_CMD) for decoder.
testEncoder(VIDIOC_(TRY)_ENCODER_CMD) for encoder.
Change-Id: Ia68587412ed316f0c871397da83d6c56665cfbb5
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
- Do not clear V4L2_FL_USES_V4L2_FH flag because this
flag indicates that file->private_data points to
&struct v4l2_fh.
- Initialize v4l2 ctrl handler with driver ctrl handler.
- Add ctrl ops for g_volatile_ctrl to return updated
value of volatile ctrls from driver.
Fixes: v4l2-compliance:
testPrio (VIDIOC_G/S_PRIORITY).
testQueryControls (VIDIOC_QUERYCTRL).
Change-Id: Ibe4b6fa67d2c02a5afeb627f2060e4761c5ef717
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Add support to set AV1 operating point to firmware.
Change-Id: If0f31c2bf04cb6d4f783264fb3ce706b1bf98261
Signed-off-by: Mihir Ganu <quic_mganu@quicinc.com>
Add support to set AV1 decoder bitstream format
(low-overhead or Annex-B).
Change-Id: Ie36eefe0488bf33af91802c0bee51b3fec2024ac
Signed-off-by: Mihir Ganu <quic_mganu@quicinc.com>
Reset video_cc_mvs0_clk_src value to resolve MMRM high video
clock projection issue.
Change-Id: I0c549d7537a82792e9de708c96c265f0dce5908d
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
New dma_buf_vmap api takes dma_buf_map struct as argument,
instead of kvaddr.
Change-Id: I2843a28b2c0c2de2d9cd1bfa96fb1a86ffba6059
Signed-off-by: Chinmay Sawarkar <quic_chinmays@quicinc.com>
Add AV1 codec, profile and level defintions and controls in UAPI.
Add these controls as private controls in video driver.
Change-Id: I58edec2d7fabceaa405708c99a75997c9f454022
Signed-off-by: Mahesh Kumar Sharma <quic_smahesh@quicinc.com>
Add the required config and platform files to enable
kalama platform with iris3 VPU.
Change-Id: Ia65d2212b946d0d37fc99e30e25fe408882bdec3
Signed-off-by: Mihir Ganu <quic_mganu@quicinc.com>
Fix compilation errors on parrot which has a
different lunch combo other than taro/diwali.
Change-Id: I35aee69bc8e18d50395a01b97d282c21e75da193
Signed-off-by: Priyanka Gujjula <quic_pgujjula@quicinc.com>
dma_buf_vmap() api changed from kernel version 5.15 and hence
check kernel version to use the updated api.
Change-Id: I05b7c72199cedfe9c33a8888fffb5e38da875f7e
Signed-off-by: Maheshwar Ajja <majja@quicinc.com>
HLOS doesnot have access to raw region. Instead,
read from sw_range4 region which are sense
registers for raw region.
Change-Id: I662266b6557756d9bf6ef687f81b7869a792e7f7
Signed-off-by: Priyanka Gujjula <quic_pgujjula@quicinc.com>
Max mbps has to be calculated using max fps.
Change-Id: Ic0e3b337c7327e9a9bd4ada6b2008ccb6fa1be04
Signed-off-by: Priyanka Gujjula <quic_pgujjula@quicinc.com>
Reject any unknown buffer received from fw.
Change-Id: Icfc639cce364566a5479f5c12e13f7cb4fc06b00
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
check max mbpf as well while allowing
the real time session.
Change-Id: I1091582a02e01a4daa9c58ec5b50400b7d856610
Signed-off-by: Manikanta Kanamarlapudi <kmanikan@codeaurora.org>
1.) New dma_buf_vmap() returns SUCCESS or FAIL unlike legacy dma_buf_vmap()
which return type is vmap address. dma_buf_vmap() takes two arguments now.
Now it returns vmap address in pointer passed as second argument.
2.) If defined, use V4L2_CTRL_CLASS_CODEC else use V4L2_CTRL_CLASS_MPEG.
3.) iommu_dma_enable_best_fit_algo is commented temporary.
4.) remove subsystem_resart.h
Change-Id: I73c6a840fa6028f021debff33b88178ac74dcef9
Signed-off-by: Mahesh Kumar Sharma <smahesh@codeaurora.org>
Configure hbb value as '14' for lp4
ddr variant.
Change-Id: Id3fa3028f38dabb81d1b1fc5b117c6d10e4d45b5
Signed-off-by: Priyanka Gujjula <quic_pgujjula@quicinc.com>
Enable MMRM query support from mmrm driver
API along with internal core caps.
Change-Id: I997e8005e31a1bc3a8223de8cecc45fcaffdeeca
Signed-off-by: Priyanka Gujjula <quic_pgujjula@quicinc.com>
Use maximum framerate from published
instance caps to make it platform
agnostic.
Change-Id: I319768e722774969287abb9e782ddbece7593ff9
Signed-off-by: Priyanka Gujjula <quic_pgujjula@quicinc.com>
Calculate video decoder load based on max of crop and
input port resolution as few clients might not set
resolution on input port in which case load is not
proper before streaming started.
Change-Id: Id95d42e4cb3d992f759ce3388a8aeb55fadf16d7
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Treat resolutions above (4K + half 4k) as 8k session instead of
simply treating above 4k resolutions as 8k sessions. Similar update
for 1080p and 720p resolutions as well.Based on above conditions,
support or reject a session.
Change-Id: I7be70b4c2b6e96ced6da2443f85e440c45fb616c
Signed-off-by: Darshana Patil <darshana@quicinc.com>
[1] Disable MMRM if platform feature
does not support.
[2] Query for scaling support from
mmrm driver and enable/disable
based on queried support
accordingly.
Change-Id: I34cf9a9e150b0823828507e3f5d680aae6eb14d4
Signed-off-by: Priyanka Gujjula <quic_pgujjula@quicinc.com>
Currently enable_bugon debugfs feature not working for WD timeout
cases. So added change to support that usecase.
Change-Id: I0cb3e6ed34d58c7969c727dea77f4fa695923c25
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Cancel batch work when core is suspended due to
pm suspend.
Change-Id: I5c6e4f0eb0883a9c3cd2711f65e0d74a6cced310
Signed-off-by: Priyanka Gujjula <quic_pgujjula@quicinc.com>
Currently MSM_VIDC_BUF_DPB buffer allocated and queued to firmware
as part of output port streamon. Sometimes firmware raises b2b ipsc
with only change in fw_min_count. So client will not follow port
reconfig sequence and calls directly HFI_CMD_RESUME on output port.
So firmware holds only prev set of DPB buffers, which is not sufficient
and it continues to wait for further DPB buffers and that is leading
to stall and testcase fails. So added change to requeue new set of
DPB buffers, incase of b2b ipsc(with only change in count).
Change-Id: I213c752be4ca9dc16f838ab2990c996c4d78e95f
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
