In current implementation, wait_queue is used for waiting on WMI ready
event, it is now changed to event mechanism
Change-Id: I08b4f088874b7c63e20b129f14dbac01851496e5
CRs-Fixed: 2276900
As part of the effort to reduce overly verbose and excessive logging
driver wide, reduce or remove logs in scheduler as much as possible.
Change-Id: I1e45c439315e81d9ff05e1688fe690d0ca30e097
CRs-Fixed: 2280337
Add cfg API's to parse different global
and psoc INI files, but store to the same
global or psoc store as required.
Change-Id: I588f47bc61094640ddfe4b29712ca978908f2844
CRs-Fixed: 2278934
Pass offset value to the Firmware to support split scanning
of total dwell time in smaller chunks. Offset passed is
calculated from TBTT.
Change-Id: I8114acd1147d468aa6471f672307d8ea0ec8611d
CRs-Fixed: 2134748
OL_ATH_PARAM_CBS - Command to enable/disable CBS
OL_ATH_PARAM_DCS_SIM - Command to simulate DCS interferences
OL_ATH_PARAM_CBS_DWELL_SPLIT_TIME - Command to configure
Dwell Split time
OL_ATH_PARAM_CBS_DWELL_REST_TIME - Command to configure
Dwell Rest time
OL_ATH_PARAM_CBS_WAIT_TIME - Command to configure CBS wait time.
OL_ATH_PARAM_CBS_CSA - Command to enable channel switch with CBS.
Change-Id: If1c45c7caa53da7f05e56f23c74cf1b982ea8f48
CRs-Fixed: 2134748
The driver includes the DFS channel in case of force SCC,
on 5GHz band, and rejects all 2.4Ghz band channels in the
ACS scan list in case of band_width > 40. The DFS SCC not
allowed till date prevents the SAP vdev up on that DFS channel,
hence the SAP turns on with default channel of 2.4 Ghz i.e
channel 1, because the ACS scan channel list didn't contain
any 2.4Ghz channel.
Fix is to include the 2.4Ghz channel list, and remove that DFS
channel in case the force SCC is enabled, and STA is already up
on that channel.
Change-Id: I1dc14d3890d8128e83910c2bed1cb95d7f70ea1c
CRs-Fixed: 2261802
Account for tx.success and tx.comp_pkt stats counters
at peer level and propagate them to pdev level.
NSS stats need to be updated for all packets.
Change-Id: I18de95217690c9234060253671e0d5e1ef295e2a
CRs-Fixed: 2270816
Add cdp ops for timestamp setter/getter function for peer based on
mac address.
Change-Id: I7025fdd7540f47bb4d3f95ef6d9f2ef92af5f1f1
CRs-Fixed: 2275985
Add following scan CFG items to common scan component
1.CFG_ACTIVE_MAX_CHANNEL_TIME:Max active dwell time
2.CFG_PASSIVE_MAX_CHANNEL_TIME:Max passive dwell time
Change-Id: I3aeed28a404984812ebbc56f2a8d28e7e9ab7de2
CRs-Fixed: 2277105
Currently, the macro type and the "is an ini" value information are
clubbed to together in the cfg component. This lead to not being able to
use the macro type with non-ini configuration values. Split macro type
and "is an ini" value information in the cfg component so that
cfg_in_range can be used with non-ini configuration values.
Change-Id: If63f222cf21a45f0d7d3809f1be845ecc2b2cd65
CRs-Fixed: 2278656
Currently the host sends the fixed gtk offload params
and the FILS TLV params, even when the FILS feature is disabled
in the host, which force firmware to pick the KEK from the
FILS TLV structure rather than from the fixed param structure,
which further leads to GTK re-keying feature fail.
Fix is to send only the fixed params in case when host doesnt
supports FILS.
Change-Id: I53a77257e716bf290a6f4bd62927020f073e2df6
CRs-Fixed: 2275938
AST entry has been allocated at the time of peer creation at DP.
But during peer delete it is not deleted. This leads to memory leak
in the wlan driver. To fix this delete ast entry at the time of
peer deletion.
Change-Id: I8d16b575bd44bf06415c3b1cc44c1c7833c88137
CRs-Fixed: 2273601
As per the updated spec, 11AX PPDU's HE SIG_A data-5 field has added
LTF symbol field which is 3bits in size.
Add logic to parse the TLV coming from hardware and update the
LTF symbol value.
Change-Id: I05e2ff8ece7e14dc22ce747e9a9b906bf130462f
CRs-Fixed: 2235233
For logic that builds on top of QDF_DEBUG_PANIC(), it would be useful to
be able to specify function and line number explicitly. Add
QDF_DEBUG_PANIC_FL(), which is QDF_DEBUG_PANIC with explicit function
and line number parameters.
Change-Id: Idc79f2fb0e769930167766f21a54a82c4b7ff40a
CRs-Fixed: 2276964
Assign DMA address correctly to all scatterlist elements of scatter
gather table in qdf_mem_shared_mem_alloc() func.
Change-Id: I07988d0bc35e3e0fcf7b9f6df02a9e56a0e8b083
CRS-Fixed: 2110715
Add WLAN_MLME_OBJ_DEL_ID for tracking obj delete requests
sent to target and responses received from target.
Change-Id: I7d7de4b168f1e7174f1cbb213bfe0f75aaa63db9
CRs-Fixed: 2271367
Due to some inconsistency in defining definition of cfg_##mtype##_in_range
and the mtype of the CFG_INI_xxx definitions, usage of cfg_in_range
was causing compilation issues.
Fix the cfg_in_range related macros with correct mtypes
Change-Id: I239a5f8735e5f2d7807b4947e36a655f58f26210
CRs-Fixed: 2278335
Map all module level log APIs to per-level log APIs
to compile out specific log level if required.
Change-Id: I4072b6740cb43200fd95c40943b66e1d5f8f1847
CRs-Fixed: 2266719
Reverting the change where mgmt ctrl frame buffer was assinged NULL for
NONTLV payload case as this check is handled later in the same path.
Change-Id: Icccfb401fe34da593198bac27650139654021636
CRs-Fixed: 2276923
Firmware needs HW MODE ID not list index.
Use HW mode ID to set HW MODE WMI command.
Change-Id: I12f9d83daee1c99706c345d85f03781257b492bf
CRs-Fixed: 2256175
TX comletion for WMI_FORCE_FW_HANG_CMDID would come after
TARGET_STATUS_RESET is set. In such a senario, there would
be memory leak.
Flush TxLookupQueue for WMI_CONTROL_SVC during htc_stop.
Since netbuf is freed in ISR, just free HTC frame here.
Change-Id: I5fab3effda1db70fa9b1208c854231a88b48309b
CRs-Fixed: 2242862
Such log will show once has the spectral scan result message
need to send to application, which is boring and delete it
Change-Id: I4e7fd8877b354d94022b65a8e43cc4ca3e285943
CRs-Fixed: 2274032
Currently, it uses the dev mac as peer mac addr for parameter and
the function wlan_obj_psoc_peerlist_get_peer_by_pdev_id returns
NULL because the mac addr does not match. Then the callback will
be ignored for WMI_UPDATE_STATS_EVENTID.
Change-Id: I6e257d3103315bbacb66b3f5db660cfa883966b5
CRs-Fixed: 2272056
Setup monitor mode rings and allocate
descriptors only if QCA6390_MONITOR_MODE is
defined.
Change-Id: I9c9bdc1e325eda822a326d64d6445a7112083420
CRs-Fixed: 2271998
Add and initialize UMAC peer handle into DP peer structure as opaque
and to pass UMAC node structure to ol if layer for Block Ack and
rx_frag_tkip_demic functions.
Change-Id: If7c3faf859c97832c3c7f50fc163142b68eedeeb
CRs-Fixed: 2241356
Move few common dp_ol_if_ops functions to target_if layer as part of
DP-CP interaction convergence
Change-Id: I9ad740af687f550f64ef8f81919159b73204e7b8
CRs-Fixed: 2243694
In the scan channel list, host sends both 2.4GHz and 4.9GHz channels to FW
because there are ieee channels which have same value in 2.4 GHz and 5GHz
bands. Example: channel 1 is 2.412 in 2.4GHz and 4.942 in 5 GHz.
When converting a channel to freq, the host uses low/high 2GHz and 5GHz
frequency ranges. For a partial-offload 5GHz pdev, both low/high 2.4 GHz
and 5 GHz frequencies are set and hence 4.9 GHz channel is converted to
2.4GHz frequency.
To fix the above issue, based on the wireless modes remove either low/high
2.4 GHz or low/high 5 GHz frequency based on the wireless modes.
Change-Id: I1fb0a56c70d1dc0ffc2731da3f25c910af46bb41
CRs-Fixed: 2239771
In existing code, variable used to track mgmt. and control
TLV is getting reset only in success case.
Add change to reset it appropriately.
CRs-Fixed: 2248313
Change-Id: Ieac5dc215f441b0530013ea1e36abcba19294754
Changes to switch to the preferred preCAC channel after the
preCAC is done.
User can configure non-DFS channel as an intermediate
channel to reduce AP bringup time, and configure the DFS
channel as usual. PreCAC Logic will use the intermediate
channel as the home channel and will prioritize the DFS channel
to start preCAC first and switch automatically after the preCAC
timeout.
Command to configure intermediate non-DFS channel
iwpriv wifiX interCACChan <non-DFS channel num>
Assumption:
Intermediate channel should be configured before configuring
the DFS channel as operating channel.
Change-Id: I1dc00fa395aec53bfe5a6361095cd7d77ced503c
CRs-Fixed: 2272085
Currently DFS channels are skipped for SAP/GO in cds_get_channel_list
when ini g_sta_sap_scc_on_dfs_chan is configured as 0.
Refine the logic of DFS channels skipping when station exists. Do not
select DFS channels for SAP/GO when below cases are both satisfied.
1. Station exists.
2. Ini g_sta_sap_scc_on_dfs_chan is set as 0.
Change-Id: I2f082388a662d54968b3c2e95e5713eeffa1b131
CRs-Fixed: 2275724
Forward declare 'struct wmi_spectral_cmd_ops' in
file wlan_spectral_utils_api.h to avoid
compilation issue when spectral feature flag
is disabled.
Change-Id: Iba8dfbb2007f20d409fbb2d67ee29f702264e50d
CRs-Fixed: 2269005
osdep contains many legacy APIs which have better counterparts elsewhere
in QDF. Remove unused APIs from osdep to avoid reintroducing their
usage.
Change-Id: I912b6d0dae510e96f5ab520d5d5b4ac6c60fbe86
CRs-Fixed: 2276316
Currently, there is no logic to ensure a given nbuf has been properly
unmapped when it is freed. This can lead to side-effects when the same
address is allocated for an nbuf in the future. Ensure a given nbuf has
been unmapped during free to ensure all nbufs are properly unmapped.
Change-Id: I925af1fbbbde6baa0f12a4468a33332bc75bdfbc
CRs-Fixed: 2271768
qdf_event has a number of overly verbose logs, which use QDF_TRACE
directly. As direct use of QDF_TRACE is deprecated, optimize logs in
qdf_event and replace any remaining QDF_TRACE calls with qdf_*()
logging macros.
Change-Id: I89491d7e49ea323d1bc3a32789c005b0238f0099
CRs-Fixed: 2270770
