Get Logical Address failure comes after SSR during rigorous testing.
This calls removal of swr master device attached. Once removal occurs
further headset insertion/removal does not get detected. Do not remove
swr master device attached to fix the issue.
Change-Id: Iac78b4a12ef296566d082e75ac8905f73d6b2a47
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Vote for LPASS HW core in soundwire clock request before
soundwire register access to avoid LPASS going to sleep.
Change-Id: I1e54ece19130cf6bd63fbf75a8a0716856c3b73e
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Add support to enable RCO during VA usecase.
Change-Id: Ic6b640f62a8a88b5d5b616fc05798917913356ed
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Add support for wcd938x codec variants. Changes detect the
variant and enable the corresponding features supported by
the codec variant.
Change-Id: Ib990465b42b903174391bb87115af47431b862ec
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Enable TX clock during VA path setup for SVA usecase to make
sure LPASS audio is in active state.
Change-Id: Ic835905e48919e3c97ab2b82b43b90a146f4f32e
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Add Bolero clock resource manager driver to handle/manage
bolero clocks for all the concurrency usecases like record
+ voice activation.
Change-Id: I970a05d96fc9060b44bfe670d465f0b9d72cc53b
Signed-off-by: Vidyakumar Athota <vathota@codeaurora.org>
Read hphl_swh and gnd_swh from dtsi instead of hardcoding to NC
for every USBC target. Some platforms use NO switch.
Change-Id: I3dca6c7450579e8feb5d80c1340495958683a026
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Return error in case of wrong path being selected
for port mapping and port params functions.
Change-Id: I5d66a9cd32e9c8e6d8ebac0ea073b1a1762407b6
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
There can be deadlock between __bolero_reg_read/write and
bolero_runtime_suspend. Remove the mutex_lock in
bolero_runtime_suspend to avoid deadlock.
Change-Id: I712b9f24adeddda8899b39f90291394965443163
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Stop mbhc operations during ssr down to cancel
any pending detection sequences.
Change-Id: Iff054cf8b3099959a1be561bd937057258f57b81
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Add DAPM widgets for soundwire clock on Tx path and
VA path to enable the desired clock source based on
the usecase.
Change-Id: I48b04e63317cefd8bf12d58b002efb37087f8dc2
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Disable EN_CUR_DET to fix receiver noise as per hw team
recommendation.
Change-Id: Icbeea920d02279ff845072e54be1c449db7bd2da
Signed-off-by: Meng Wang <mengw@codeaurora.org>
If we start playback on special hs after record is done and perform
SSR/PDR then playback gets paused. This happens because ANA_TX_DIV2_CLK
which needs to be enabled for special hs gets disabled after record
is stopped. Maintain a count for ANA_DIV2_CLK to enable/disable it
as required.
Change-Id: Ic73475c83cb16e3c014f35b8d46ee22d2e7a2efd
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Update audio routings for HDR recording on WCD938x codec
for AMIC1 and AMIC5 paths.
Change-Id: I67b93fe11c7a5b16ffd4bb8b58431be9dfba615e
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
In wcd-spi driver, the kzalloc is used to allocate memory for TX and
RX buffer. Those allocations are order4 or order5, which could fail
on some kernels. To avoid potential memory allocation failure, the CMA
region is used for those allocations by dma_alloc_coherent API.
Change-Id: I0a4d6c6b5e0e47f96187563272e63c3a006e469f
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Add support for soundwire clock for VA usecase.
Change-Id: I1f56678ad36e4ae6c8dd458c0b7e96e847694050
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
When ADSP is in power collapse or island state, it would fail
to access LPASS codec register.Vote for LPASS core to avoid
LPASS power collapse with pmruntime approach while accessing
LPASS registers & TLMM.
Change-Id: I74d037e499fb6f1245b9a1bd1b0a77200608c27b
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Enable soundwire gpio before enabling soundwire clock
so that bus clash does not happen when interrupts are
received.
Change-Id: I40983b8837373f1ea7ac8fa6add7c56225ff0592
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Check for valid handle before pm_runtime_resume in bolero register
read/write functions to avoid dereference.
Change-Id: I34d567e7575202817f4fcda784d0f3df2ed77bde
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Frame sync of bolero macros need to be at 4KHz default
value.
Change-Id: Ia5399a3c4bee7e0f74115e5ffcb1ed51cbd07639
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
During capture path setup, tx path hpf is set to hold.
Clear tx path hpf hold after device path setup.
Change-Id: I3299fc5d84d6e86e23c9ef150c8770ef9d59a870
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Headset Idle detect feature powers off PAs when
there is no signal. Add widget to enable
this feature for headset path.
Change-Id: I4c88057b347e40317578b5eb014053c17d196b85
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Add pm6125_divclk entry in pmi clock
array to support tasha codec in trinket target.
Change-Id: Ib2bacbeebb48d9b711abbc9f923a3b4b22cd7629
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
