Loop is continuing as chain index is getting assigned to zero inside loop.
Adding check for chain index to avoid infinite looping.
Change-Id: Ifff67c00b15d12195e5a3bf554de1529511c400f
CRs-Fixed: 3261913
Added fix,
a. To populate response timestamp from phy timestamp.
b. Based on window type swap address1 and address2 to match the sniffer.
c. For VHT frames, increment 1 to the received nss value.
Change-Id: I68dffadb609d82e2ad2cf433fcee2a76b0be98e7
CRs-Fixed: 3235718
use msdu_count and index to occupy buffer headroom within mpdu.
new mechanism to debug buffer while using pf tags enabled
Change-Id: I1b7d8a1d7ec93f51869119294d2f0b14e3909fe9
CRs-Fixed: 3217284
dp_mon_free_parent_nbuf() function is required to be
used outside of file dp_rx_mon_2.0.c hence make it
public.
Change-Id: I2c300362fee3610fce0109704ea1849333bf9715
CRs-Fixed: 3250904
Add support and handle tx monitor full buffer payload and
other minior fix include change of name for uniformity.
Change-Id: If401ecd5e1c6263584fa7013df672459c883ca8b
CRs-Fixed: 3215244
Monitor vdev attach is called both AP and Monitor VAPs
AP vap creation are started prior to monitor install.
So, add the check to determine whether valid monitor vdev or ap vdev.
Change-Id: If7a83a6826499574f88a4a1220ba3642c028f66a
CRs-Fixed: 3240300
Changes to fetch the default monitor ring config and then
apply CFR filter settings on top of it instead of overwriting
the default one.
CRs-Fixed: 3241818
Change-Id: I7b9d1c9560fd665e0f6418176e6dd3642450442f
a. to avoid dynamic memory allocation of ppdu_info per-pkt path
which is leading fragmentation, use statically allocated
ppdu_info.
b. Disable rxmon workqueue processing as statically allocated
ppdu_info is being used.
Change-Id: Idbcd49863954582349900a414bb1aa80f68aab72
CRs-Fixed: 3239974
Subscribe only for the required downstream and upstream tlvs instead
of subscribing for all the tlvs. Also set only the required word mask
configuration
Change-Id: I998d0bf3b331bf2d5227bbba4b5962bcba80a2e5
CRs-Fixed: 3238211
Update RSSI specific parameter from beryllium
specific path to common path as part of
extending feature for lithium also.
RSSI calibration parameters are received as part
of WMI event from FW, update these parameters to
monitor pdev via CDP interface.
Change-Id: I4e35d873db6d1ad03d86694a8d36decffe409a0e
CRs-Fixed: 3231120
To avoid memory fragmentation during wifi down/up,
initialize ppdu info flex mem pool during pdev attach
instead of pdev init.
CRs-Fixed: 3235962
Change-Id: I7970ab056e600ccfe28ae1ccdc50a66d5ae0ade8
- Handle scenario where decap type may be invalid when
buff address tlv is received.
- Add check for min number of frags during restitch process.
- Minor fixes during rx mon tlv processing.
Change-Id: I0120d97e297701362183189e29c1d5df91affdc1
CRs-Fixed: 3216050
Changes to configure the rxdma ring for CFR. Move existing
API of legacy chipsets to dp_mon_1.0 and add Waikiki
specific API in dp_mon_2.0.
CRs-Fixed: 3231265
Change-Id: Id7276bb7bb7f58461c7e10a0695c3e78a1c39b0c
Add history to track the monitor status buffer entry.
Currently the below 3 events are added:
- Monitor status buffer reap from ring
- Buffer enqueue to a local list
- Buffer dequeue from local list for parsing.
Change-Id: I7c17070ffee25a9a9dc4af0b48bfa8808e18887d
CRs-Fixed: 3225647
Fill up the lite monitor vdev which is needed to deliver the
tx monitor frames to the configured vap.
Change-Id: I298abde095fef44e67a741f48f2f73a6998efc7a
CRs-Fixed: 3226335
Properly increment message word variable while forming rx ring
selection config htt message. Message word should point to
appropriate word before calling individual feature config funcs,
this will help to track exact message word position in calling
function.
Change-Id: Iad6c446ac91fdb5be9286f4fa076847e1728dc74
CRs-Fixed: 3219549
a. Fix memleak issue due to RX_HDR not received for a MPDU
b. Compute appropriate packet offset for non-decapped packets
c. Add correct DMA_LEN while adding a frag to SKB.
d. Add debug stats
Change-Id: Ie946f79df94df05789220b97c159c60d608bf1b2
CRs-Fixed: 3213698
This change fixed compilation issue when enabled two configures -
CONFIG_WDI_EVENT_ENABLE and CONFIG_REMOVE_PKT_LOG.
Change-Id: I121ea61bd3681b834a36c0bc8017b855897023a4
CRs-Fixed: 3223552
Remove unused local variable mon_soc in the dp_pktlogmod_exit to
address the compiling issue when PKT log enabled.
Change-Id: I5de03433603988e6f8125285a58c141551d7a149
CRs-Fixed: 3225370
In case of MLO, peer consumpiton stats are getting incremented only for
primary peer as the API was called after primary peer check.
Add fix to call the API before primary peer check so that the stats are
updated for all the link peers
Change-Id: I603e7a37564858e030d8f0f5f16792f516728f60
CRs-Fixed: 3222984
Check lite monitor condition in Tx monitor handler function
and correspondingly take action to deliver the packets.
Change-Id: Idf352bd677f00daae0c8e4325ff6661c7a4f854b
CRs-Fixed: 3219324
Add API to iterate through all modes to set setup tx monitor based
features. Also added filter setup function for tx lite monitor mode.
Made additions to filter print functions and added the fields that
were missed.
Change-Id: I20070f75d800199199195f73b1e2a13b428d5672
CRs-Fixed: 3191619
Split tx and rx monitor buffer add function so that
they can be indivudually called when lite monitor mode is enabled.
Change-Id: I9996d0261f1912237bd6fa45058d410698b9fa28
CRs-Fixed: 3206170
Since more than one components depend on reap timer of
monitor status ring, add bitmap to record the trigger
sources of the timer and refine the APIs/calling functions
accordingly.
With this change:
When a new start request comes, if the source is
CDP_MON_REAP_SOURCE_ANY, skip bit set, and start timer
if any bit has been set in the bitmap; while for the
other sources, set the bit and start timer if the bitmap
is empty before that.
When a new stop request comes, if the source is
CDP_MON_REAP_SOURCE_ANY, skip bit clear, and stop timer
if any bit has been set in the bitmap; while for the
other sources, clear the bit and stop timer if the bitmap
is empty after that.
Change-Id: Idaa7837c4b93b247ff2236aa5072d309fa9548c2
CRs-Fixed: 3190347
Changes to handle CFR information from ppdu_info in
enhanced stats disabled case.
In enhanced stats enabled case, CFR info is handled in
dp_rx_handle_ppdu_stats API.
CRs-Fixed: 3214538
Change-Id: I41ea6e080f5ede661eed06764939fe2feaa6102e
For telemetry agent, some more statistic support is required.
Hence, add support for telemetry agent required stats.
Change-Id: Ieb2210a4a5dfe6fa0a0dd46a85f2d9ae483bb746
CRs-Fixed: 3210797
