Currently pn-check logic for OOR frames does not take into account
the security mode. For open mode case, BE hardware does not populate
current and previous pn_numbers. Hence a PN-check comparison may yield
incorrect results.
Check for secure mode, before checking for PN numbers.
Change-Id: I398872d467058bc1ee1d04c811818ea20c5aec7e
CRs-Fixed: 3129986
Bifurcate the hal_get_reo_qdesc_size to corresponding lithium
or Berillium platforms.
This can handle difference, if any between them and later enhance
to set the qdesc size based on peer negotiation.
Currently for NON_QOS_TID, the BA window size is hardcoded as
256 for Li and 1024 for Be.
Also modify hal_reo_cmd_update_queue_params to accommodate higher
Block-Ack Window size. For this steal bits from pn_size and use
pn_size values as macros PN_SIZE_XX which is only 3 bits,
instead of 8bits.
Change-Id: If310175da579aa3a47a8b031a1774c6c8982d4b2
CRs-Fixed: 3125986
Disable monitor mode on sdx65,it will save 5MB buf,
and improve iperf performance.
Dp_rx_buffer_pool_refill is used monitor mode in
MCC, and rxdma1_enalbe=0, we don't need this logic.
But in WIN side, only monitor mode need this logic,
and rxdma1_enable will set true.
Add func dp_monitor_pktlog_reap_pending_frames and
dp_monitor_pktlog_start_reap_timer in dp_internal.h
for compile issue.
Change-Id: I43fee6d7a1836063a7539c3bd4745eef15a4e4b2
CRs-Fixed: 3129542
Ignore peer if it is missing txrx_peer in reinject path while
going through the peer_list. This condition can hit when the
peer_setup call from the control path is not yet received for
the peer.
Change-Id: Ie57d07353f33749a439415d808fc010702c3c884
CRs-Fixed: 3130821
The monitor status ring is configured for filtering
in undecoded phy error packets. Each phy error can
be controlled using a specific error mask configuration.
Added below cfg80211tool command to configure phy error
mask for filtering undecoded phy error packets.
cfg80211tool wifix set_phyrx_error_mask mask_0to31 mask_32to63
cfg80211tool wifix get_phyrx_error_mask
Change-Id: I5e4f6a49458cc534d6d1d0f7f2a7424f3cc747b4
Added change:
1. Set/reset RXDMA MON STATUS ring filter setting and send HTT
message to capture undecoded frame
2. Handle undecoded frame to update cdp_rx_indication_ppdu structure
from hal ppdu_info rx status and generate WDI event to deliver it
to upper layer
Change-Id: I14485f28333b113b5a2fab639611551c2b08af2b
Flush dp cached frames only for mld peers and legacy peers, as
link peers don't need it.
Change-Id: I19a27c5810a1fec6a62bfe5a6377073dc382fb4c
CRs-Fixed: 3131405
Add default queue map config msg handler. This msg is sent by the target
in response to a default queue map request.
Change-Id: Id08e0b175172614514b9fb2dcabcc5f7f068896f
CRs-Fixed: 3126854
Support TX completion and RX delay tracing by Ftrace for KIWI,
Add generic IP protocol packt tracing like ICMP packet.
Change-Id: Ie0c4b1764ce953fd2ed41fc5eea8aa28c8d427d9
CRs-Fixed: 3126080
For 1x1 DBS case, host also need to configure max_mac_rings
as 2 and initialize each RX ring, currently host only consider
2x2 DBS case.
Check DBS capable instead of 2x2 DBS capable only.
Change-Id: Ic2d4fda9be245a3d0448b6b87ba8676f41d9187e
CRs-Fixed: 3129165
2x_pdev changes are include for support new IPA API's
and change the existing API's argument to support new
parameter which is ipa handle, create a new API to get
the IPA hdl from IPA component in DP
Change-Id: I3d2b378620dbd1e64d295623534126e0eebc2d28
When kernel calls driver callback to get stats, dev_get_stats()->
ndo_get_stats64() .Host driver allocates memory using
kmalloc (size, GFP_KERNEL) routine,
but as ndo_get_stats is under RCU lock but not in interrupt
context(in_irq = 0, in_interrupt = 0, irq_disable = 1),
qdf_mem_malloc () uses ‘GFP_KERNEL’ to allocate memory,
leading to backtrace for sleeping function call from invalid
context.
As per kernel doc
(https://www.kernel.org/doc/Documentation/networking/statistics.rst),
while in ndo_get_stats64 () API, driver should not calling a routing
which can sleep. Use atomic variant of qdf_mem_malloc() to fix this.
Change-Id: I775f53dd1e8165e962321215e65d46142fb3b3cc
CRs-Fixed: 3128647
Adding SAWF ops for CDP and adding SAWF context
to DP peeer.
Add calls to initialize DP SAWF peer context
when DP peer is created.
Change-Id: I7efb89ae18a28c8b070ad9fcee7754553caa7ff3
CRs-Fixed: 3118160
Currently the monitor buffers allocation is attempted
for 2 RXDMA monitor status/destination rings.
For certain targets, eg KIWI, there is only one RXDMA
monitor status/destination ring, and the monitor buffer
allocation for the second ring fails. This return status
is not handled properly.
Fix the monitor buffer allocation to use the number of
rxdma rings from cfg context and handle the return status
properly.
Change-Id: I86718dbd790d96d794963b17a4c9bdf32792d854
CRs-Fixed: 3128299
Specify vdev_id in bitmask format for HW vdev stats reset instead
of directly specifying the vdev_id.
Change-Id: I6e3cecdc83d01ecdfdeca3236e94cc91c57511ef
CRs-Fixed: 3128590
MO stands for Monitor Other which is a filter setting specified by
host to hardware to receive TLVs for non-associated clients.
In case of enhanced stats and smart monitor, non-associated clients
are not considered and therefore disable filter settings for MO for
these features.
Change-Id: Ic533072ff668c7ab54188101a889882c4ee4ba4a
CRs-Fixed: 3123784
Add change to fetch and save the WMI service capability of FW to
support multi AST delete using service bit
Change-Id: Iba1af7c230574ae68086357cbb49ae3ca3d944e4
CRs-Fixed: 3118892
Initialize txrx_ref_handle for whunt bypass,
Which is complaining use of uninitialized txrx_ref_handle,
as it is not able to detect that txrx_ref_handle is
populated from another API.
Change-Id: I0f69cf4c8442a5655559622a5825d7af35b9ae5e
CRs-Fixed: 3127788
WAR for wrong length in first msdu in wbm rx error path while
handling scatter gather buffers. Get the msdu length from the
last buffer instead.
Change-Id: I869391ef5ca7005dce972013679c2143be836ecb
Changes for vdev and pdev stats as per the new peer stats
re-organization architecture.
Change-Id: I48f9fb4b0915c40f4add83f2e2dd074cc97874fd
CRs-Fixed: 3092123
Changes to get and reset peer stats as per the new peer stats
re-organization architecture and taking MLO scenario into
consideration.
Change-Id: I1c49e11d502585cc955ad087ffe3a606be23d83e
CRs-Fixed: 3092123
Make changes in the APIs for printing of peer stats by passing
the buffer holding peer stats along with the peer.
Also define macros for peer stats aggregation as per the peer stats
re-organization architecture.
Change-Id: Ia03cdb145de7e7c3355463ac31313edd863dfd2b
CRs-Fixed: 3092123
Delay and jitter stats are placed in struct dp_txrx_peer.
Make changes accordingly for allocation, fetching and clearing
operations of these stats.
Change-Id: Ic9b9e48467741072806000f4d1b3aa8e5c65d508
CRs-Fixed: 3092123
* Initialize stats in dp_txrx_peer and dp_monitor_peer as per
the stats re-organization.
* Update peer calibrated stats on every timer expiry of 1 second.
* Define APIs to reset monitor_peer stats and to fetch rdkstats_ctx
from monitor peer.
* Place check to make sure that monitor peer related APIs are
are called only for legacy peer or MLO Link peer.
* Update peer based pktlog flag, tx and rx capture feature flags
in monitor_peer.
Change-Id: Idadbe19e85d4a9fdf77fb6dabe0c8a4952b024b8
CRs-Fixed: 3092123
Segregate the stats among dp_peer, dp_txrx_peer and dp_mon_peer
structures.
Segregation is done as per below:
* Move stats updated in per pkt path to dp_txrx_peer
* Consider stats updated purely in per pkt path as per_pkt_stats
* Consider stats for which there is an alternate path of
updation as extd_stats
* Move delay stats and jitter stats to dp_txrx_peer
* Maintain calibrated stats in dp_peer
* Move rdkstats_ctx from dp_peer to dp_mon_peer
* Move invalid peer from dp_pdev to dp_mon_pdev
As per the above segregation, if there is not support for
alternate path of stats updation, then stats in dp_txrx_peer is
combination of per_pkt_stats and extd_stats and dp_mon_peer
does not hold any stats.
If support is there, then dp_txrx_peer holds only per_pkt_stats and
dp_mon_peer holds extd_stats.
Change-Id: I2eb81d1b93a178985c05ff4f6557a173cc8a262d
CRs-Fixed: 3092123
Move the stats parameters from the dp_peer which are used
in per packet path to txrx_peer
Change-Id: Ieb68b6950740791b37bbd2bfdc4815c3d7bc4834
CRs-Fixed: 3095637
Move the parameters from the dp_peer which are used
in per packet path to txrx_peer and params related
to monitor path to monitor peer.
Initialize txrx_peer and monitor peers.
Change-Id: I0449c67c1cd47deb76bc89b5ddc64174f6694eb0
CRs-Fixed: 3095637
Check physical address of nbuf with ring addr. If they
don't match, move to the next descriptor. Activated with
build flag.
Change-Id: Ibd6b38679d677a59f14450db3224104396c88d2e
