Use INI "sta_disable_roam" to disable roaming on STA interface if
connection on other interfaces ex. p2p, ndp comes up. Each bit of
the INI "sta_disable_roam" represents an interface.
ex. LFR3_STA_ROAM_DISABLE_BY_P2P BIT(0)
LFR3_STA_ROAM_DISABLE_BY_NAN BIT(1)
As INI "sta_disable_roam" is generic for all the interfaces, cleanup
for INI "p2p_disable_roam" done.
Change-Id: Icd05a97c640ca07978d9960a33de036ed6fe38df
CRs-Fixed: 2637555
Glitches seen after the STA disconnection because of the roam scan
triggered on a heartbeat failure ( beacon miss ).STA does a partial
scan followed by full scan causing the DUT to go off-channel from
the STA and P2P home channel, causing the music BLIP.
Fix is to disable roaming irrespective of data traffic present
or not on P2P interface and enabled again once P2P is disconnected.
Change-Id: I5ddf946adbfbe99d5b20c23c46b2b4ac0bfac47f
CRs-Fixed: 2632939
As a part of 802.11ax amendment, 6GHz band operation is added.
Since the 6 GHz channel numbers are overlapping with existing 2.4GHz
and 5GHz channel numbers, use frequency to identify unique channel
operation instead of channel number. Channel frequency is unique across
bands.
As part of above requirement add logic to process rx mgmt
packets based on the frequencies instead of channel numbers.
Change-Id: Ib063070738ecdb4f83379eafe50629778a490aae
CRs-fixed: 2522693
Replace timer_stop with timer_stop_sync & add some debug print to
track the roc cookie.
Change-Id: I9a71d30b31da3de2bf3242e4a310bad4542b10aa
CRs-Fixed: 2537164
In P2P GO mode, if the P2P client device is not VHT capable and
only HT capable, but the DUT P2P GO is VHT capable and advertises
2x2 NSS and sends packets with 2x2 rates, it results in interop
issues with HT only capable P2P client devices.
When GO is operating in DBS mode, GO beacons advertise 2x2
capability but include OMN IE to indicate current operating mode
of 1x1. But here peer device is only HT capable and will not
understand OMN IE.
Check if the P2P client device is only HT capable and has
"\x00\x50\xf2\x04". Then downgrade the P2P GO operation to 1x1
nss. Modify rx mcs map value in association response to enable
only mcs 0-7.
Change-Id: I7177c5aee9a560a20c50a63886c0ee77f7d617ae
CRs-Fixed: 2464925
Currently, INI gSkipDfsChannelInP2pSearch is initialized in P2P
component and later copied to scan component for usage.
Since this INI is only used by scan component and not the P2P
component, move the initialization part also to the scan
component.
Change-Id: I44a6208ab5f3ee062073550143e23e5800342376
CRs-Fixed: 2405395
Currently many modules use the scheduler_post_msg API which
doesn't allow the driver to know about the src, and destination
modules.
Fix is to call scheduler_post_message which has src, dest, and
the que id.
Change-Id: Ia5c43fe3ceeb7db9dde6241cbabac0ce48f88061
P2P component related files moved from hostcmn to CLD, this change
adds initial functions, enables P2P in Kbuild.
Change-Id: I04102a5f3e59ded13ada15b1b417ae81c7a10e90
CRs-Fixed: 2361500
This is mirror change for 0f9f01950
Currently if the number of APs in the STA environment
are many, then the STA will receive many beacons, whose
beacon process path can take long time, in the kernel
work queue, hence the other processes have to wait
for them to complete, and may get timeout, if the
the time to process the beaocns is larger than their
process timeout.
Fix is to :-
1. Add rate limit to failure conditions of memory
not allocated
2. Make memory allocation in path of beacon process
atomic.
Change-Id: I488b446c23fd01c993f7dd9bd989867fda2331d8
CRs-Fixed: 2363307
