Currently RBM id is not assigned properly for RX buffers
in Rhine architecture. Fix this by assigning RBM id during
soc attach in Rhine.
Change-Id: I8f3a781bfaf81366417107f4bd3da61b142ca1e2
CRs-Fixed: 3573342
Hex dump in monitor descriptor processing is causing high
CPU utilization. Since it is not advisable to add prints/debug
in per packet processing, remove hex dump debug log.
Change-Id: Ic98c3608a468cf4665ea94b1ebee725ca7121545
CRs-Fixed: 3571491
Debug logs in per packet tlv processing is causing high CPU utilization.
Remove these debug logs.
Change-Id: I520b3a83c7a5cafefe6f2d25d14ea5c1b9816b11
CRs-Fixed: 3571491
Fix tlv processing code for monitor mode in Big endian mode.
Changed all the 64bit tlv extraction apis and used 32 bit extraction apis.
This is needed in big endian mode since HW supports word swap option and
TLV has to be intepretted using 32bit extraction APIs.
TLV tag, userid and TLV len falls on the first 32 bit and hence using
both 32bit or 64 bit extraction APIs give same result.
Change-Id: I9b9ff78c79f21888964d405016c58c3b5988b254
CRs-Fixed: 3551002
Currently in monitor mode, links are released to WBM through the
SW2WBM_RELEASE ring and WBM will feed the links back to RXDMA
through the WBM2RXDMA_LINK_RING.
WCN6450 uses SOFTUMAC architecture where WBM is not present.
Hence the WBM2RXDMA_LINK_RING is repurposed to SW2RXDMA_LINK_RING
where host will directly release the links to RXDMA using this ring.
Change-Id: I110f607e38c4c2ab10eb1bd7b1f5a7bce2f03692
CRs-Fixed: 3493368
Direct link refill ring HTT setup fails due to srng
ring id mismatch. IPA uses a max of two RXDMA_BUF
rings but the hal srng ring id has a max of 3 RXDMA
ring ids which is causing the ring id mismatch for
direct link refill ring.
The fix is to remove the addition IPA related hal srng
ring id and move the macros appropriately to make
it consistent for both IPA enabled and disabled
cases.
Change-Id: Ieb4bbf646f5f0360e4013ae3e235cc7368087731
CRs-Fixed: 3523851
In WBM2SW Rx Error path for BE
specific functionality
1) HAL API's/Function pointers are replaced
with specific function calls.
2) Efficient read/write of WBM Error Info
from HAL Rx desc.
3) Minimize reading data from Nbuf TLV.
4) Peer_id fix for MLO clients with security
Change-Id: I1c9e6e767bbf6565567d998ae8e1357398de5803
CRs-Fixed: 3486304
Add Tx TLV recording support for monitor 2.0
Also add support to control Rx and Tx TLV
recording
Change-Id: I27a0d2c9ea8bdfacd46e6b7188b45b08ed47bbcd
CRs-Fixed: 3422787
ring history array size is large. Change is aimed
to split the allocation into small trunks to avoid
memory allocation failure.
Change-Id: If977baab23718d0186ad2ce6d33319b52096f2f9
CRs-Fixed: 3479226
Currently QCA_MONITOR_2_0_SUPPORT macro is used for both TX and RX 2.0.
but on MCC side, only RX 1.0 is supported and as part of this feature
TX 2.0 need to be supported.
Enabling QCA_MONITOR_2_0_SUPPORT will enable both RX 2.0 and TX 2.0, but
to support RX 1.0 and TX 2.0, we need to separate out code under
QCA_MONITOR_2_0_SUPPORT to TX and RX 2.0 macro.
As part of this change, introduce separate macros for TX 2.0 and RX 2.0
and move the common code under both macros.
Change-Id: I7ef7e488800934291538a0bca9acd21e28901214
CRs-Fixed: 3415740
In WBM2SW Rx Error path for BE
specific functionality
1) HAL API's/Function pointers are replaced
with specific function calls.
2) Efficient read/write of WBM Error Info
from HAL Rx desc.
3) Minimize reading data from Nbuf TLV.
4) Peer_id fix for MLO clients with security
Change-Id: I760694073a06c1829f28e7e92cd1657560d8eb06
CRs-Fixed: 3472220
MC/BC frames are routed to FW ring based on routing config for MC/BC
data as SRC: FW2RXDMA and DST: RXDMA2DFW.
Data offload features in FW will take care of routing the MC/BC frames
to FW in both active and low power modes.
Make this change only for kiwi/peach using hal ops.
Change-Id: Id8665261a512c9db3e808f95082ff82b47f01ade
CRs-Fixed: 3464036
NSS value derived from HW, need plus 1 to match the sniffer capture.
Added fix to increment NSS after parsing the TLV.
Change-Id: I1e0ef3949cefa1453290e400fa4a66000a3b5dea
CRs-Fixed: 3444508
1. Check Tx halt during umac reset and avoid halt if set already.
2. Perform SRNG disable only in case of umac reset
Change-Id: Id364a6460a64e83002b5c96e08031ad2a0bc8fd7
CRs-Fixed: 3459427
Add support for 4 byte TLV tags for platforms like peach for which we
have 4 byts TLV tags.
Change-Id: Iebf48a6992c21246df3fb813b5d6ae418311f062
CRs-Fixed: 3460205
Increase the DBR ring to support DBR module
DBR_MODULE_CBF standalone sounding CV data
for QCA5332 target.
Change-Id: I4ab0741d92c7c7a32243173c87d022befa702399
CRs-Fixed: 3456418
In WBM2SW Rx Error path for BE
specific functionality
1) HAL API's/Function pointers are replaced
with specific function calls.
2) Efficient read/write of WBM Error Info
from HAL Rx desc.
3) Minimize reading data from Nbuf TLV.
Change-Id: Ic8793ffcbeb2411c9b81fb32acae062e8a1f40cc
CRs-Fixed: 3362828
setup to correct value by shifting intr_timer_thres_us
by 3 for interrupt timer to take less time.
Change-Id: I0eb799bf3a3443a7ca4a43512b7ec03444da81bc
CRs-Fixed: 3439468
HAL changes to populate agc gain, CFO, rx_start_ts, mcs_rate and
gi_type to CFR info.
Change-Id: I20b4ce1b8c065349106cd999054ff08c7f3521ec
CRs-Fixed: 3453631
Received window ppdu are dropped in work queue context as it doesn't
have ppdu timestamp. Added fix to populate ppdu timestamp.
Change-Id: I3276284351f27ae2e8bfb787aa96fb031e4025ac
CRs-Fixed: 3439473
