The item "bss_max_idle_period" is not an ini item and we can only
use it's default value 0. It's not convenient to set it a value
that user required. So set it to an ini item.
Change-Id: Ie514992448cde192ffd6f1402a4477fabbbae741
CRs-Fixed: 3591728
Connecting event logs are to be sent after candidate
selection and not immediately after receiving
connect request.
Modify the connecting event logs to be sent after
sta info event logs.
Change-Id: I83b654ba0ef3458368ba7dd6353c5ab67077ec39
CRs-Fixed: 3599703
In the MLO-MBSSID test, STA can request information of
non-Tx BSS through Tx BSS by configuring non-Tx BSS MLD ID
within the ML probe request that is invoked as part of scan
request. Add support to configure MLD ID in scan start
params to FW.
Change-Id: Iec5a144e597a7f6b9b741f279e4424f975c5115c
CRs-Fixed: 3561040
During rrm_initialize () set RRM cap for Channel Load
and statistics to enable by default. Same rrm capabilities
driver sends to AP in association request during connection.
Change-Id: I3a9d87b8bd8b28b84ccc3578fff2ad1c7ebd8a6e
CRs-Fixed: 3609838
Active ini he_max_ampdu_len and change default value from 0 to 3.
Use min(ini, he_max_ampdu_len from F/W band/MAC cap) as final
he_config.
Mdm platform need set different value to pass throughput KPI.
Change-Id: Ib0580a0e68b72b6b7cd02d327ba643cfd1508080
CRs-Fixed: 3609154
For BTM certification cases, FW is unable to roam to
testbed AP BSS due to scoring logic. Reset the BTM
abridge flag that is used to enable FW to select
candidates based on score.
Change-Id: I29b6e1b5dea969263eb263103c6d2c10d5047f20
CRs-Fixed: 3591574
As per customer requirement, to enable or disable t2lm support
configure CFG_T2LM_NEGOTIATION_SUPPORT as INI.
Change-Id: I8eb4c78a04bbaa5ce0c155d04ddb793d31b092ee
CRs-Fixed: 3608649
For certain cert cases, roaming is disabled through
CAPI. Supplicant sends RSO disable to Host and the Host
disables BTM offload as well as part of roam disable.
But, for cases like load balancing, Firmware has the
logic to handle BTM requests with disassociation
imminent bit set to 1, by sending an event to Host to
trigger a T2LM request action frame rather than a BTM
response. Thus, set BTM offload bit even when roaming
is disabled to allow FW to handle BTM request frames
instead of supplicant.
Change-Id: Iaa0cbbce62dbb76518880ef2470d6d0819c501db
CRs-Fixed: 3590733
Firmware sends PEER_OPER_MODE_CHANGE event to host in SAP
mode when a connected client indicates upgrade/downgrade
of its bandwidth.
Host needs this data as any further SAP bandwidth
upgrade/downgrade should honor the indicated bandwidth for
that specific peer.
Change-Id: I50fecf670b47c56e3f33b8519fde1d5eaec7523f
CRs-Fixed: 3604716
Include BW_IND_ELEM IE in beacon and ECSA frames while advertising
CSA. This is needed when upgrading the bandwidth to 320 MHz.
Send the ECSA IE with switch count as 1. Use a timer to reset it
after sending the beacon out.
Change-Id: I6c38ef1ce4629b7a67bcbf803c7dbcced05ade33
CRs-Fixed: 3604422
SAP operating bandwidth may get updated due to concurrencies.
This might be temporary and SAP moves back to its original
bandwidth once concurrency is gone. So, add set and get APIs
to maintain the SAP current operating bandwidth.
These can be used during/after bandwidth update operations.
Change-Id: I386ad20bcbd0902672a890bde510ecc50e58512b
CRs-Fixed: 3600223
1. Upper layer sends QCA_WLAN_VENDOR_ATTR_LINK_STATE_CONTROL_MODE
vendor command to configure control mode in host/fw.
2. Host receives GET_ML_LINK_STATE driver command to return
control mode (configured at step 1) to upper layer.
Host should reply as a response of GET_ML_LINK_STATE with same
value of control mode configured at step 1 to upper layer.
Change-Id: I6ae82c2a1c0e4ff13cea678bf27916a3cda8ad81
CRs-Fixed: 3595730
Currently, if the AP advertises both Local and Regulatory
TPE IEs in the beacons, STA uses an INI to choose one over
the other. Vendor ask is to change this logic and allow STA
to use the minimum of the two TPE power limits. Also,
deprecate the INI that sets the preference between local
and regulatory TPE IEs.
CRs-Fixed: 3574510
Change-Id: Ibf19020d59621efa72cf290ef34c825fdb50e3e7
Move tSapChSelSpectInfo structure from sap component to mlme
component so that it can be use by LL_SAP as well
Change-Id: Ic3c2919054326aca3530071df27d425bb78a699a
CRs-Fixed: 3561182
Update the mlo_support_link_num config to 3. This will enable
support to connect/roam to 3 Link AP with 3 links advertised.
Change-Id: I6241f7024271208c8d1584549edb91cc37fadcb8
CRs-Fixed: 3582858
If INI is enabled don't derive first link's MAC address
and directly use MLD address in that place and derive
next link addresses.
Change-Id: I3c2b9f64df3f75799adf8718ee83d157f6dd9097
CRs-Fixed: 3584062
Supplicant sends SET_MAX_BANDWIDTH driver command to update
connected channel width dynamically.
Host should update connected bss rate flags so that host
can send proper cp stats as per updated channel bandwidth.
Change-Id: I676635b108f91f4fd8471fbe66352aa471dd9a9f
CRs-Fixed: 3519930
Extract aux device capability and store it in wma/hdd/mlme.
current only 1 aux supported so only save info
for aux0.
Change-Id: Ib19bad6cf3c0bda5a31ea4993a2f7e587b2043e2
CRs-Fixed: 3549751
Add support to dynamic enabling the TDLS.
Vendor subcmd: QCA_NL80211_VENDOR_SUBCMD_TDLS_ENABLE
Change-Id: I3b9164ba04a4d9c23d7f580020966c222f8bd359
CRs-Fixed: 3562148
Add support to send whether currently TDLS is available or not.
Vendor subcmd: QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_STATUS
Vendor attr: QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_AVAILABLE
Also add support to get the TDLS number of active sessions
using below vendor attr.
Vendor subcmd: QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_STATUS
Vendor attr: QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_NUM_SESSIONS
Change-Id: Ie9ad09de9593559c4d57599a9af58a95af99e60f
CRs-Fixed: 3554429
With these APIs, vdev connection is effected by the
WIFI standard version. For example, if wifi_std is
wifi6, then the connection will not use 11be feature.
Change-Id: I8f762f9cf16d876d5cf2847561b61c11a23e97b5
CRs-Fixed: 3554305
Add API to restore or clear user set link num when SSR or
interface down happens.
Change-Id: I955937817481740dc3dd75b51d669ed36b5f74d2
CRs-Fixed: 3531260
Save EPCS Capability in psoc instead of vdev to avoid the value
lost when random MAC setting happends.
Change-Id: I35299da59156dc1197adaa3350b0d11255b76c2e
CRs-Fixed: 3551773
Add support to inform peer enable/disable UL_MU
support in STA mode using OMI frame.
Change-Id: Ie12f4991654f7504802b4ae0fbdd26aecda1ee63
CRs-Fixed: 3546176
Extends the wmi_service_ready_ext2_event_fixed_param
structure with a new field to support N-link MLO
connections.
The host will now calculate the maximum number of
links per MLD value by intersecting the firmware
capability and the ini value present in MLME component.
And this calculated value will be stored in the MLME
component.
Change-Id: I89bf3553781cd809cdb5496fbf0f68e59569033a
CRs-Fixed: 3512343
Add vendor command API to set EPCS (Emergency Preparedness
Communications Service) capability and trigger EPCS
function enable or disable.
Change-Id: I2ffe4d268731c57dd6e3ddfe0586d4dcb77dc611
CRs-Fixed: 3511170
Add vendor command support to configure MLO and EMLSR mode
capability configuration for EHT testbed and DUT STA. It
includes EHT OM control support, EMLSR padding delay
configuration, enabling STR MLMR mode, forcing power save
on active MLO links for a defined number of beacon periods,
forcing active MLO links, and invoking EMLSR mode entry or
exit.
Change-Id: If4fb2c576b789aa2e28d6742a02ebdc01eb6e994
CRs-Fixed: 3507770
Disable BSS color collision detection for the following-
- Testbed STA for all modes
- STAUT if EHT mode is EMLSR.
As part of BSS color collision detection, scan is invoked in
FW after the defined detection period and as part of this,
EMLSR exit happens in the middle of tx/rx. Thus, disable the
capability for EMLSR mode.
Change-Id: I6417f7c081c1408372924b20d8985a597a536e27
CRs-Fixed: 3507796
Add check to determine whether FW support multipass
SAP before enabling multipass support
Change-Id: I7db5a7bad6b9ac89c8c4e7c4c177695671402657
CRs-Fixed: 3515310
Update Preamble Puncturing INI parameter "he_rx_pream_punc" to
default which gets from FW.
Also update the cfg HE 2 GHz and 5 GHz capabilities parameters
instead of memcpy.
Change-Id: If424ce4a4fe771a2817677a50a472a2c77529d90
CRs-Fixed: 3515585
Set MAX supported BW for STA so that the device can connect
to APs which are advertizing 20 MHz in beacons but increases
in association response and next beacon.
Change-Id: I8ed418382f696c7461235996c4e90201cafafcb3
CRs-Fixed: 3415718
Add support to boost or reduce MLO scoring with
mlo_tp_preference_percentage ini.
Change-Id: I0a1280fe259d9e65e5f0f991d456f650b9d1be69
CRs-Fixed: 3456412
Add function wlan_mlme_convert_he_op_bw_to_phy_ch_width, check 80+80 or
160 with ccfs0 and ccfs1.
Add 20M/40M check for vht bw with prim chan id and ccfs0.
Change-Id: I01a407358d7c310f92c8a69004ebb002b615438a
CRs-Fixed: 3511291
When ANI_LITTLE_BIT_ENDIAN is not defined, a compiler error is
flagged in the definition of struct mlme_ht_param_info due to a
misplaced #endif, so relocate it.
Change-Id: I72df79a1dfae84c2cd6797d1d112de6ef8ca7ef6
CRs-Fixed: 3498279
Add a new cfg item to drop connection request if
AP is operating in 6 GHz SP mode and STA doesn't
support SP mode but supports VLP mode.
Change-Id: I0f20d63f68b2424390ca424188f95f26971c9ada
CRs-Fixed: 3470602
relaxed_6ghz_conn_policy cfg item is no longer needed
with new regulatory policy as there is no dependency
on STA, AP country code to find 6 GHz power mode for
connection and also connect request should be rejected
if AP is advertising VLP and STA doesn't support VLP.
Hence remove this cfg item and the related APIs.
Change-Id: I3a48a3c6343e57f4f2386ebbab1f88d5052af505
CRs-Fixed: 3470571
As per requirement, for MLO connection host should reject
GET_CU_FOR_EACH_SUB_BW request and return failure to upper
layer as a response.
Change-Id: I8177d92982c832a17c1657239b69cc3712e1eaf4
CRs-Fixed: 3476349
