Add support in driver to check whether F.W supports
dynamic MSDU aggregation size programming to H.W.
Change-Id: Ifb2d41efb23934414cce38753df82e1d15f01e11
CRs-Fixed: 3540531
In PTQM migration WMI command, multiple peer entries can be sent.
If the number of entries are more than WMI buffer size limit, then
multiple WMI commands are sent. If there are some WMI PTQM cmd sent
successfully followed by a failure, reset peer flags only the failed
entries instead of all the entries
Change-Id: I1031f1ac700e05e651a2488827cb6b6cda195bac
CRs-Fixed: 3556179
Add INI to disable AST indication. AST disable flag will be
sent to the target in resource config.
Change-Id: If30cac010681faf06bbcaa2d492d6843e3e675d0
CRs-Fixed: 3544223
Due to limitation uCode always filling SGI as long for VHT mode in
rx_msdu_start_tlv.
This change is to extract VHT Rx data packet SGI from
WMI_VDEV_SMART_MONITOR_EVENTID.
Change-Id: I5fcdc463ea2a6d83253e39cc377a2471aeb4e122
CRs-Fixed: 3477303
Define and initialize new WMIs for v2 ATF.
Rename send_set_atf_cmd to send_atf_peer_list_cmd which
is more appropriate.
Change-Id: Icab17703a4ccea8e2b859bf6a18387fbd2234226
CRs-Fixed: 3542065
Extract WMI Service bit for ATF 512 Max client support advertised by
Firmware as part of wmi service ready.
Add rxops functions as for upper modules to get it.
Change-Id: I51e8dcaad96bdd29eb6fd4c37b0917127696ede6
CRs-Fixed: 3551661
Add send_mlo_link_set_active_id_cmd_tlv API to send
force link bitmap to target.
Change-Id: Ie3a41bd2c82b6d10c8d82e4afa83621969c01798
CRs-Fixed: 3515441
Add support to send link recommendation command. This will
allow the user to pick the link that they want to utilise.
It is now the WFA prerequisite for AP.
Change-Id: I7d4459a65ce599aa5f674a3cc4a54185595ede40
CRs-Fixed: 3534151
Add nstrinfo in ml_partner_info and parse sta info.
Add nstr_info in ml_peer_ctx and peer_assoc_params
and send to FW
CRs-Fixed: 3483776
Change-Id: I255fc671b84a2048c6057a61a6de8d81db36c681
1. Host receives QCA_NL80211_VENDOR_SUBCMD_MLO_LINK_STATE
vendor command.
2. parse the new attribute
QCA_WLAN_VENDOR_ATTR_LINK_STATE_MIXED_MODE_ACTIVE_NUM_LINKS
and get the number of MLO links to operate in the active state.
3. If any of the links is in an inactive state due to concurrency,
we need to reject the request.
4. Host sends to FW via WMI command WMI_MLO_LINK_SET_ACTIVE_CMDID via
the below WMI attributes with mode WMI_MLO_LINK_FORCE_ACTIVE_LINK_NUM
and set the wmi flag control_flags to indicate if FW need to use
force link number instead of force link bitmap.
Change-Id: I91759e6a1273d393f4bef1264478950416752355
CRs-Fixed: 3529489
Add wmi pdev param support for long range phy param like cts timeout
slot time etc as part of enabling user config.
Change-Id: If1f3d86e09e634cde43ef8211831511781e96672
CRs-Fixed: 3520970
Add support in driver to check if FW supports per link stats
in case of mlo connection, using the wmi service event
WMI_SERVICE_PER_LINK_STATS_SUPPORT
Change-Id: I85ea50877455efc3646d3b1892ce855dc07b1dbf
CRs-Fixed: 3520338
Add WMI command support to force power save on all the
active MLO links for a defined number of beacon periods.
Force power save allows the firmware to suspend STA links
for X beacon periods and remain asleep even if the AP
advertises TIM as opposed to regular power save mode where
STA links wake up if the AP indicates that it has buffered
data to send.
Change-Id: I381a107f3f5f479b0eee4f526a49d6fc886aced0
CRs-Fixed: 3509543
In api extract_service_ready_ext2_tlv(), Multipass
SAP capabilities is extracted to enable multipass
sap suppot in host
Change-Id: I422a5dbaca405ceaea70559863af48d046f92cbe
CRs-Fixed: 3515331
The qdf_print default log level is error, which is not
properly set for non-critial/fatal case. So change
it to wmi_info by default.
Change-Id: I4507416e241a47e56de48f537cb1ad5ad913c264
CRs-Fixed: 3519208
In the case of SSR, the WMI layer callbacks will not be called as part of
tx completion. Hence, the nbuf and HTC packets are freed in
send_packet_completion(). In this case, the WMI pending command count is
not decremented. During target recovery, this wmi pending command will be
increasing eventually, and assert will be seen when pending commands reach
MAX defined value.
To fix this, initialize the WMI pending commands to zero after the target
recovery.
Change-Id: I56d38d7064bc089725d5453883c22f572e51e078
CRs-Fixed: 3513491
Firmware sends NDP_HOST_UPDATE event as an immediate response to this
request and starts cleaning peers one by one. Once an NDP session is
ended (indicating NDP_END to peer + internal cleanup), firmware sends
NDP_END_IND to host.
Currently, host driver stops the wait timer and change state from NDP
end to disconnected upon receiving the NDP_HOST_UPDATE. But firmware
might still be in the process of NDP cleanup. As the NDP_END_ALL
context is unblocked, driver may send NAN disable request to firmware.
This may cause inconsistency in firmware state machine and firmware may
drop the ongoing NDP_END request. So, peer doesn't get the NDP_END frame
in such cases.
Unblock the NDP_END_ALL-wait call only upon last NDP_END indication to
avoid such issues. This change moves the major functionality of
NDP_HOST_UPDATE processing to last NDP_END indication. Cleanup/remove
the processing of NDP_HOST_UPDATE as it's not needed anymore.
Change-Id: I00e73d211de4626484ffb2483c00adce1a7302c1
CRs-Fixed: 3512923
Add 'max_simultaneous_links' in peer_assoc_params
and send it to FW via peer_assoc_add_mld_params.
Change-Id: Ie4c3492cf03ef43e1bb02122019cda3679fb5f3a
CRs-Fixed: 3476565
If WMI max pending commands are reached and UMAC reset is in progress then
add the WMI pending command to host SW queue instead of crashing. The
reason is FW will not reap the WMI commands from the CE ring when umac
reset is in progress. Hence, add the pending WMI command to host SW ring.
Change-Id: I871147a80669a88875b3f6891bd0b0a56b92733b
CRs-Fixed: 3502217
Add structure peer_vlan_config_param for
WMI_PEER_CONFIG_VLAN_CMDID to support vlan peer config
Change-Id: I2f93ce2bd10d1920d33ee0e26d1b7d344813852b
CRs-Fixed: 3492156
Add APIs to init the TSF sync capability based on
WMI_SERVICE_MLO_TSF_SYNC service bit sent from FW,
per ML group.
Change-Id: I5dad3fef7ebfa2af330b95d45cac3bef862f46f0
CRs-Fixed: 3491364
Add support to trigger UMAC reset with mode1 teardown request
for mode1 target recovery SSR.
Change-Id: Ib2d1679162a2084488081c76f6753287a6e4d5c4
CRs-Fixed: 3458369
In case of MLO connection, firmware sends each vdev's
status information using extended vdev stats event.
Add support in driver to extract it.
Change-Id: I95f2a96cb7034b5b070cc6f37a97591e01e5893a
CRs-Fixed: 3483730
Adding support for reset PN value using
WMI_HOST_PEER_FT_ROAMING_PEER_UPDATE peer command.
Change-Id: Ib486d09c80878d41efa299756e655d66babd825d
CRs-Fixed: 3490034
Currently, there is no provision to identify that the driver supports
NAN pairing protocol. So, new kernel and new firmware will start
exchanging PASN frames without realization that old driver is loaded
and thus, frames will be drops in driver.
So, to fix this issue, firmware introduces new parameter in nan
capabilities to indicate host about pairing capability. Host driver
extracts the TLV to get nan capabilities and cache the max num of
pairing session.
Change-Id: I4153c7ec4d425294b0799122bf61e735184f0960
CRs-Fixed: 3492518
Set flags in WMI peer assoc to inform FW if node is
1. QCN Supported
2. Operating in Multi-AP mode
If node is 3rd party and operating in Multi-AP mode,
FW and uCode will change crypto register for each Rx/Tx from/to such nodes
Change-Id: If4cf9ec39fa11a90733df45fffa473a672643f8e
CRs-Fixed: 3488865
Roam background scan abort, driver print roam result
failed, but current ap is still connected.
Add roam background scan abort reason for roam fail
reason.
Change-Id: I32bc7202f1f49f9d36e2f2e49bce6e30ea36fa7b
CRs-Fixed: 3477755
Add code changes to handle new wmi_mlo_link_disable_event
Extract the wmi event params and store in host defined
structure.
Change-Id: I6893bfa4da7b27f4a9b1ce2936057bb3576a317c
CRs-Fixed: 3458680
1. Read the new service capability:
WMI_SERVICE_CCA_BUSY_INFO_FOREACH_20 MHz: Via this host knows
whether FW supports reporting of CCA busy info for each 20 MHz
subband of wideband scan channel or not.
WMI_SERVICE_VDEV_PARAM_CHWIDTH_WITH_NOTIFY_SUPPORT: Via this
host knows whether FW supports VDEV param channel width switch
with OMN/OMI notification or not
2. Register osif callback to send scan done indication to upper
layer
3. Add 2 new scan flags pause_home_channel and
report_cca_busy_for_each_20 MHz
Change-Id: I63d561a3c5f8e49a3ca42d956e6b630c63edeaf4
CRs-Fixed: 3460901
