Zero memory of mlo_link_set_active_resp struct in event handler to
avoid invalid value in it.
Change-Id: I18cbe0903bea23c9069a84af8207f4265a7111e1
CRs-Fixed: 3558678
Swift radio in Hawkeye is a partial offload chipset supporting
11AC mode. It has no support for MLO. Currently, when MLO event
handler registration fails due to No Support, an error is returned.
This terminates the device bootup causing a crash.
To solve this issue, do not return an error status when the
event registration fails due to No support.
Change-Id: I89819461bbc1d0fa31ef0558c93d06723f13de35
CRs-Fixed: 3520749
Add MLO manager and target interface support to force power
save on all the active MLO links for a defined number of
beacon periods. Force power save allows the firmware to
suspend STA links for X beacon periods and remain asleep
even if the AP advertises TIM as opposed to regular power
save mode where STA links wake up if the AP indicates that
it has buffered data to send.
Change-Id: Idb3ea42cfc2333a4b177780d09ddec6904ea0c16
CRs-Fixed: 3514468
In api extract_service_ready_ext2_tlv(), Multipass
SAP capabilities is extracted to enable multipass
sap suppot in host
Change-Id: I422a5dbaca405ceaea70559863af48d046f92cbe
CRs-Fixed: 3515331
For QCN9160 target, uCode reports the dBm converted values
in status tlv. Hence, remove conversion at HOST.
Populate proper chip type for QCN9160's RCC.
CRs-Fixed: 3509733
Change-Id: I8422f661161337cdce5ef8001fb502aebdbe0dc2
11be target support 65 gain values from 0 to 64.
Add changes to support the same.
Change-Id: I4239683ca7e49b2cc8c5de7b0a719e27a74b8494
CRs-Fixed: 3513135
In enterprise mode, when power event is received from Target, ACS is
not called and regulatory takes no action to AFC power event.
Hence, when host receives the event REG_AFC_EVENT_TIMER_EXPIRY with
subevent type SWITCH_TO_LPI or STOP_TX from FW as a response to payload
reset command from client application, the channel list is not updated
as 'afc_reg_no_action' is enabled.
To fix this issue and update the channel list, add reg txops to trigger
channel list update while processing REG_AFC_EVENT_TIMER_EXPIRY event
from FW when 'afc_reg_no_action' is set.
It is to be noted that 'afc_reg_no_action' should be set only in
enterprise mode.
Change-Id: I9ba2a0a0d0c4282895b3787943aca1dd45c199c3
CRs-Fixed: 3492604
After mode1 recovery, because of short circuit operator "&&",
decrement of init count is not happening and causing failures
to read global shmem arena tlv, fix the issue by changing the order
Change-Id: Iae922f09c2a9c3690318e35657f92cc3bf1061e7
CRs-Fixed: 3497802
It is possible that the host queued the peer delete command to FW
but no peer delete event was received within the peer delete
timeout as FW initiated a UMAC reset.
When the vdev mgmt response timer times out, check if umac reset is in
progress. If so, restart the vdev mgmt response timer.
The entire umac reset handshake completes within 200ms if not
FW asserts. Hence no need to add the count check before
restarting the vdev mgmt response timer.
Change-Id: Ief3351b940658a870e303d191a3873bd60499023
CRs-Fixed: 3475168
Add APIs to init the TSF sync capability based on
WMI_SERVICE_MLO_TSF_SYNC service bit sent from FW,
per ML group.
Change-Id: I5dad3fef7ebfa2af330b95d45cac3bef862f46f0
CRs-Fixed: 3491364
Add support to trigger UMAC reset with mode1 teardown request
for mode1 target recovery SSR.
Change-Id: Ib2d1679162a2084488081c76f6753287a6e4d5c4
CRs-Fixed: 3458369
enum reg_afc_dev_deploy_type afc_dev_type is defined as variable in
service_ready_param.h if AFC enable, reg_afc_dev_deploy_type defined
in wlan_reg_afc.h.
Include this head file if AFC enable so that don't have to include it
everywhere include service_ready_param.h.
Change-Id: I4bab90dc051c8afb984d7a486c97743b5c277589
CRs-Fixed: 3482426
Currently, there is no provision to identify that the driver supports
NAN pairing protocol. So, new kernel and new firmware will start
exchanging PASN frames without realization that old driver is loaded
and thus, frames will be drops in driver.
So, to fix this issue, firmware introduces new parameter in nan
capabilities to indicate host about pairing capability. Host driver
extracts the TLV to get nan capabilities and cache the max num of
pairing session.
Change-Id: I4153c7ec4d425294b0799122bf61e735184f0960
CRs-Fixed: 3492518
Add api support to read the pointer to recovery mode in shared
memory, this pointer will store the if the mode recovered is
mode1 or mode0
Change-Id: I9e8dbd32c62dbb75d27d590a5013b4a9837fae24
CRs-Fixed: 3458369
Add code changes to handle new wmi_mlo_link_disable_event
Extract the wmi event params and store in host defined
structure.
Change-Id: I6893bfa4da7b27f4a9b1ce2936057bb3576a317c
CRs-Fixed: 3458680
1. Read the new service capability:
WMI_SERVICE_CCA_BUSY_INFO_FOREACH_20 MHz: Via this host knows
whether FW supports reporting of CCA busy info for each 20 MHz
subband of wideband scan channel or not.
WMI_SERVICE_VDEV_PARAM_CHWIDTH_WITH_NOTIFY_SUPPORT: Via this
host knows whether FW supports VDEV param channel width switch
with OMN/OMI notification or not
2. Register osif callback to send scan done indication to upper
layer
3. Add 2 new scan flags pause_home_channel and
report_cca_busy_for_each_20 MHz
Change-Id: I63d561a3c5f8e49a3ca42d956e6b630c63edeaf4
CRs-Fixed: 3460901
Add device Id and target type checks for qcn6432 target
compilation
Add CFR and spectral support for QCN6432
Change-Id: Ic908fa768aa1be7cfc40be7fcc7f9ca6aa85aaa6
CRs-Fixed: 3351747
Add APIs to init the TSF sync capability based on
WMI_SERVICE_MLO_TSF_SYNC service bit sent from FW,
per ML group.
Change-Id: Ie8ca48f8f6065f02eefaea85ad967e32d09787fc
CRs-Fixed: 3470139
1. Check Tx halt during umac reset and avoid halt if set already.
2. Perform SRNG disable only in case of umac reset
Change-Id: Id364a6460a64e83002b5c96e08031ad2a0bc8fd7
CRs-Fixed: 3459427
After receiving WMI service ready ext2 event and htt msdu index to
qtype map is derived, call CDP API to evaluate whether TX ILP can be
supported or not, update the TX ILP capability to DP, also send WMI
INIT CMD to FW to notify if host has enabled the TX ILP support or
not.
Change-Id: I472ebc5c7fa4b2996b790b58274fa3c048f6d7f9
CRs-Fixed: 3447519
Update meta data version of Waikiki as it supports AOA
phase delta extraction now.
CRs-Fixed: 3462217
Change-Id: I909802417125ecafaf4d14466c349f0ed9b45fd2
Extract htt_msdu_idx_to_qtype_map array from wmi service ready
ext2 event, it is needed for DP TX ILP feature enablement.
Change-Id: I64766f5b6ebc6632ce4994a8d53224d98beb5879
CRs-Fixed: 3445507
QCN9160 CFR is supposed to in parity with QCN9000, hence
set the proper metadata version.
Change-Id: I34f06dd856d2c2ccf3b956592fa0f1035e608d46
CRs-Fixed: 3454540
Add target_if api to update SR threshold. Previously
we were using WMA api's since it will be eventually
removed in future we moved the functionality to target_if
Change-Id: Idddfcfe55d28af2b122ac9260dc8388feec42d14
CRs-Fixed: 3374628
IPA_OFFLOAD will be enabled by default for MSM.
This is a WAR to disable IPA offload during compile
time, based on the IPA_WDI_OPT_DPATH feature flag from IPA.
If the flag is not defined in the IPA test
module file, IPA offload path will be disabled.
This is a WAR, and will be fixed once a Kernel config is
available to enable or disable the optional wifi datapath
feature.
Change-Id: I7aad275f4d86a2ffc239f1fe343de31ec2988fad
CRs-Fixed: 3431972
The existing code does not support capability to be set
if trigger based ranging rsta wmi service bit is enabled.
This require addition of ext feature flag for trigger based
ranging rsta support.
Add 11az TB rsta ext feature flag and set the same as per
firmware capability for 11az feature.
Change-Id: I12512175d0b33daa906586c7f96f0c8c3f7400a3
CRs-Fixed: 3437057
