When getting rnr IE information, instead of getting rnr pointer through
input parameter, we can just return rnr pointer.
Change-Id: I57f683eb86bb813018a38fa3a6286e9b6e40037f
CRs-Fixed: 3025194
ESS (Extended Service Set) operating mode allows wireless
device to roam anywhere within the area covered by multiple
APs.
IBSS (Independent Basic Service Set) allows wireless device
to connect in peer-to-Peer mode only.
Fix is to allow connection manager module to filter only
those AP(s) which is/are part of ESS network.
Change-Id: I9536557daa624b9e44505efa0e0720e47b645517
CRs-Fixed: 3015220
In dfs test mode, 18 pulses are injected in a single burst, the host
driver reports the radar found event two or three times to
upper layer. For a single burst of radar pulses, radar found event
should be reported only once.
Fix the multiple radar founds for a single burst by disabling radar
detection and flushing the existing radar pulses from all queues
while processing the current radar found indication event in dfs test
mode (usenol=0).
Change-Id: I70c7c15147a5cde038773fd97735c113ca385932
CRs-Fixed: 2981217
DUT as SAP and its VDEV change to UP state, since got radar event but
channel switch disabled. Then EV_DOWN is dropped and bss peer won't be
delete. Which cause unloading failure. This change moves VDEV to
UP-UP-ACTIVE state if got WLAN_VDEV_SM_EV_CHAN_SWITCH_DISABLED.
Change-Id: I9d3a47a66fd2281166f5106e0e7bfd36c3966ed0
CRs-Fixed: 3009264
This change adds MLO support to Peer.
It implements,
1) MLO peer list management
2) AID allocation
3) MLO Peer creation/deletion
4) Notifying partner links on peer creation/deletion/assoc
Change-Id: Ie1b675dccdf0de1d79f6f32d9255cf3cca53fdf2
CRs-Fixed: 2967057
It is mandatory request to check security mode in 6Ghz band,
so enable check_6ghz_security by default. Keep default disable
for WIN as requested.
Change-Id: Idcc4cb9add98ad4bda8e4357e83460ca25221692
CRs-Fixed: 3006930
Add change to support max channel switch IE as a INI config.
With this INI enabled, max channel switch IE will be used in scenario,
where client disconnection is to be avoided with CSA on CAC channel.
Change-Id: I786e7e12e12ebcb3fc7d0720ed02e01bff6c82b8
CRs-Fixed: 2949206
Currently driver has only one name for an INI, with
this change add second name as well for few INIs based on
new requirement.
Change-Id: I67bd50652c3be7912c516b81d40f6a1ea7a7b90a
CRs-Fixed: 3007172
Currently driver reset self OCV capability from RSN based
on AP capability which is not required as it may lead to
failure of wifi-cert test case 15.1 that is sta should
advertise self OCV capability irrespective of AP capability.
Fix is not to reset OCV from rsn based on AP
capability to support OCV.
Change-Id: I24cda586ae0f364bb4eb2936985194e01f74875b
CRs-Fixed: 3002963
MLO sta needs mld mac and assoc link information to create bss peer
Get mld address and assoc link info from connection manager and pass
it to bss peer creation.
Change-Id: I147ac8365f3c99c6231df589ac17d39122d57362
CRs-Fixed: 2987496
Add support for multi vdev set param WMI API to send vdev param for
multiple vaps.
Change-Id: If7381f0b242cacff0817e6bdc16606d3d776b48d
CRs-Fixed: 2994278
Add storage for EHT mac and phy capabilities as
per 11be D1.0 and update the EHT mac and phy capability
sizes.
Change-Id: I67224b35b701235374772e9975375e695f3ed959
CRs-Fixed: 3000166
Management frames from STA should carry SA as link MAC address for ML
connection and net device address for non-ML connection.
To achieve this, update vdev mlme MAC address to link MAC address for
ML connection and to net dev MAC address for non-ML connection.
Change-Id: I2285a43882039dfc706fbf73a494cc09bcba19c7
CRs-Fixed: 2993031
Use seperate event for HO/roaming disconnect for old AP, as
if a disconnect is received during roaming, the state is moved
to disconnect and thus WLAN_CM_SM_EV_DISCONNECT_DONE is handled
as a normal disconnect and does not clean up the roaming
contexts in VDEV and peer.
Change-Id: I10e616be435b16e1cff6666940171fef6b2b4065
CRs-Fixed: 2994558
A new TLV is added to send partner link CSA/ECSA count offset to FW as
part of beacon template. Add WMI changes to populate these TLVs in the
beacon template send function.
To fix the compilation issue, added forward declaration of 'struct
vdev_mlme_obj' and removed 'include/wlan_vdev_mlme.h' include file from
wlan_mlo_mgr_public_structs.h.
Change-Id: I6e421b29bb887bec711a23db1458aca4d112ade4
CRs-Fixed: 2983249
Add puncturing bitmap along with channel parameters
in vdev structures for filling during vdev start.
Change-Id: I5e5afd6e118ed9933e4d9c30e2ad65cd4259bca0
CRs-Fixed: 2958389
In the current implementation, csa_event_bitmap for CSA in the beacon
template WMI command is set to 0. Hence, the FW sends CSA complete event
to the host at the end of CSA complete.
Set the below values to csa_event_bitmap to get the current channel switch
count from FW to update the CSA/ECSA IE count in probe response frame.
1. WMI_CSA_EVENT_BMAP_ALL:
To get the CSA switch count event for every update to switch count.
2. WMI_CSA_EVENT_BMAP_SWITCH_COUNT_ZERO:
To get the CSA complete event only when the switch count becomes zero.
3. WMI_CSA_EVENT_BMAP_VALID_MASK:
FW to follow the bitmap for sending the CSA switch count event to the
host. Example,
0X80000000: Send the CSA event when the switch count becomes zero.
0X80000033: Send the CSA switch count to host for the count 0,1,4 and 5.
Change-Id: I8380d6badc3b84c72fde489e59b51b5ac122b97b
CRs-Fixed: 2978799
In the case of Roam Start sub-state, if a new connect/disconnect
is received, an internal disconnect/actual disconnect is queued
in serialization and then the state is changed to connecting
or disconnecting, but if the disconnect command becomes active
directly the EV_DISCONNECT_ACTIVE is received in roam substates
but is not handled.
As EV_DISCONNECT_ACTIVE is not handled the disconnect is not
processed and VDEV can remain in UP state while CM assuming that
the disconnect is completed will allow a new connection which
cause 2nd BSS peer creation.
Fix is to handle EV_DISCONNECT_ACTIVE event in Roam sub-states.
Change-Id: I30180db2e15af9b793e52e891f86d54c55b7b5e0
CRs-Fixed: 2986468
Add change to increase target_if start and stop
response timeout to provide enough time to process
event in slow processing platform
CRs-Fixed: 2965898
Change-Id: I839783331bd9fa4375aee81212005b0f2ac97255
Refactor connection manager command timeouts to handled unexpected
timeouts in VDEV/PEER SM.
Also flush the req list before deinit to avoid memleaks due to these
timout, if SM is not handled properly.
Change-Id: I6cd1857464691838c75b1ceda32f94ad4cda46a2
CRs-Fixed: 2971466
New TLVs for MLO flags and partner link info are introduced in vdev
start WMI command. Add WMI changes to add these TLV in the vdev start
command.
Change-Id: Ic7d54c406f69346a6eedb43b1ebcf7266c448bd8
CRs-Fixed: 2958843
WMI vdev create is changed to incude mlo macdress as one of TLV.
Add changes in WMI vdev create send API to include this new TLV.
Change-Id: Ia13bdb8fbfc9f68d1e4c0209201f9acc4f575387
CRs-Fixed: 2958839
Define the following functions for MLO operation:
Peer create and delete
STA/SAP up and down
VDEV create and delete
Is MLD AP or STA
Change-Id: I5c9b3276b8dbb4b2a3f055480cab4a865b8af946
CRs-fixed: 2935769
Refine QDF_STATUS_E_NOSUPPORT to QDF_STATUS_E_ALREADY in
cm_check_for_reassoc_hw_mode_change() as QDF_STATUS_E_NOSUPPORT shows
that no need to do action for hardware mode change, it's not an
error or failure.
Change-Id: I6e977729f3c75cc23b921ea38728ff4c5aae7d75
CRs-Fixed: 2961362
Add missing change I4ab3c956c3169b50a69c05d9ed1c36e055aeb586
in connection manager to disable OCV in STA RSN capability
if AP doesnt support it.
Change-Id: I84b666a489b8f2e410a4901b908f57edae86b5d4
CRs-Fixed: 2960828
Configure the MBSSID info to FW for Tx AP connection to enable
MBSSID functionality in FW.
Change-Id: Ida415a5c8f1dcb66e8890595b5f3038a611d62a5
CRs-Fixed: 2959158
In cm_update_scan_db_on_connect_success, the current candidate is
always retrieved from connect req even when the resp is for reassoc
this can lead to invalid pointer access.
Fix this by getting current candidate from roam command for reassoc
resp.
Change-Id: I99afc49abd7581cf43279654a5fe1e67e2448bd0
CRs-Fixed: 2941836
With the addition of MLO_SYNC_WAIT substate, now the active status
of the VDEV will be indicated by ACTIVE substate under UP state.
Add API to check if a given vdev is in UP_ACTIVE state.
Change-Id: Ia858765b07582f89e0eaa041d56c7f2aae6f1528
CRs-Fixed: 2924322
Currently when updating the single pmk capability for an AP,
the driver only changes for the sae single pmk OUI advertised
by the AP and not the ini value. This causes the crypto entry
for the AP to be updated with single pmk flag to true even when
the ini is disabled.
So check the sae single pmk ini also to update the scan entry
as sae single pmk bss.
Change-Id: I2ae16c8da5af397b041723f9d5a3b2d8a6e7c986
CRs-Fixed: 2935440
