Add a QCA vendor attribute to configure the driver to use
roam band set by userpace. This attribute is also used to
get the configured roam band from the driver.
Change-Id: I5ea7f9d12b2a01e1b4baa43e46342af34bebba49
CRs-Fixed: 3009747
Add the following vendor attribute to indicate the bandwidth to be used for
Spectral scan operation.
- QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_BANDWIDTH
CRs-Fixed: 3024152
Change-Id: I8ffc5f4d0106cb293ac81408e3b691fc29808080
Enhance QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD to fetch thermal stats
for different temperature levels from the driver to userspace. The
stats will be stored in the driver/firmware for predefined temperature
levels and will be reported to userspace when
QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD is sent with command type
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_THERMAL_STATS.
The thermal stats can be cleared from userspace by sending
QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD command with type
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_CLEAR_THERMAL_STATS.
Change-Id: I937bc89865df484a068c887d906df5a9502f1925
CRs-Fixed: 3016851
Add QCA new status vendor attribute
QCA_WLAN_VENDOR_TWT_STATUS_POWER_SAVE_EXIT_TERMINATE
to indicate the TWT session termination due to power save
exit request from userspace.
Change-Id: I515e4e8384b92b2556d72c4015252f075577f13c
CRs-Fixed: 3013360
Add QCA vendor attributes to configure the driver to enable/disable
the Broadcast TWT support and Rx Control Frame To MultiBSS support in
HE capabilities information field. This attribute is used for testing
purposes.
Change-Id: I22a2646b642d1e764e89b209e0c872ac113ca2ee
CRs-Fixed: 3012996
Add new QCA vendor attribute to configure the driver to enable/disable
the BSS max idle period support. This attribute is used for testing
purposes.
Change-Id: Ib63c81e34344e637b638638b1da323102c66d906
CRs-Fixed: 2994951
Add a QCA vendor attribute to configure the driver to use scan
request BSSID value in Probe Request frame RA(A1) for scan.
This attribute is used for testing purpose.
The driver saves this configuration and applies this setting to all
user space scan requests until the setting is cleared. If this
configuration is set, the driver uses the BSSID value from the scan
request to set the RA(A1) in the Probe Request frames during the scan,
else the broadcast address is set in the Probe Request frames RA(A1).
Change-Id: I0b26fde5f631e99f3e6d0ecf52918cd49d0153c7
CRs-Fixed: 2994935
Add TSF cmd to enable and disable automatic TSF report from the target
to the host.
Change-Id: I17b255299f55b8e78968d951824726d533a7c6e9
CRs-Fixed: 2991909
Add QCA vendor attribute QCA_WLAN_VENDOR_ATTR_CONFIG_FT_OVER_DS
to configure FT over DS to the driver/firmware.
Change-Id: I0745c27c6bc0a8d1075d753f1d898870479105f8
CRs-Fixed: 2968681
Introduce definitions for QCA vendor specific subcommands and
attributes to report DFS radar history.
Change-Id: I2140f636a42978b564fa0800484d3dc89865c2a0
CRs-Fixed: 2958699
User sets CFR data transport mode using vendor command
QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG. By default
CFR data transport mode is relayfs, user uses vendor command
attr QCA_WLAN_VENDOR_ATTR_PEER_CFR_DATA_TRANSPORT_MODE to set
transport mode QCA_WLAN_VENDOR_CFR_DATA_RELAY_FS or
QCA_WLAN_VENDOR_CFR_DATA_NETLINK_EVENTS.
If user sets QCA_WLAN_VENDOR_ATTR_PEER_CFR_DATA_RECEIVER_PID
attr in QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG vendor
command then hosts uses RECEIVER_PID to send unicast NL events
for CFR data.
Change-Id: I40e896fad8af24e761fcbedeba761f4a3815f0b8
CRs-Fixed: 2952095
Add a QCA vendor attribute to configure the driver to use Data or
Management frames for keep alive data. This attribute is used for
testing purpose.
Change-Id: I03b133f3d61c4d34b79e41ad72cfc24334380658
CRs-Fixed: 2960804
Add QCA vendor attribute to configure the driver to transmit the
Data frames with ER SU PPDU type format. This attribute is used
for testing purpose.
Change-Id: If11523ea3e6316c47181342c3acc8425da85ee1b
CRs-Fixed: 2960794
Add QCA interface to specify the RSSI thresholds separately for candidate
APs from different bands.
Change-Id: I51d2e7c4490fde3901a4e4e8ad31d9c18823637c
CRs-Fixed: 2951242
As a part of this change, in SAP TWT mode this mac_addr
attribute is required in response for TWT setup, get_status,
pause, response and teardown. And is required in request
for TWT get_status and teardown.
Change-Id: I230047ac46181a6bfca054c610b96c054f5c303d
CRs-Fixed: 2952331
Add QCA vendor interface for userspace to get information of usable
channels for different interface types from the driver/firmware.
Change-Id: Ice662b9f14e95f32f853637e73bccd686678f278
CRs-Fixed: 2939047
Define a new reason code in enum qca_wlan_vendor_hang_reason,
QCA_WLAN_TASKLET_CREDIT_LATENCY_DETECT, for tasklet/credit latency
detection.
Change-Id: I4852fc22f57d14d6eac30ddfd8361f2a63326981
CRs-Fixed: 2929164
The firmware rejects the TWT setup request when scan is in
progress. Extend enum qca_wlan_vendor_twt_status to represent new
reason code for it.
Change-Id: I8576d8cce2fac62d9e3cf020a3dadee06ec14d5c
CRs-Fixed: 2923272
Introduce a QCA vendor command to configure the concurrent connection
policies when multiple STA interfaces are (getting) active.
Change-Id: I574880e526e4aa8e179b417fbcba6d7e9e9fcfb1
CRs-Fixed: 2915545
Define the new TWT attributes for configuring the broadcast TWT
parameters in enum qca_wlan_vendor_attr_twt_setup.
Change-Id: Ia7b0e1565cef3bfe5d213b783390c7231a1a8446
CRs-Fixed: 2924690
The firmware sends new reason codes for roaming and
channel switch in progress. Update the enum
qca_wlan_vendor_twt_status to represent new reason code.
Change-Id: I4446ebf2e096873ab641029447f8fba9153216aa
CRs-Fixed: 2908446
Add a QCA vendor attribute to configure the driver to allow the
6GHz connection with all security types. This attribute is used for
testing purposes.
Change-Id: Icbd493a9a28bef77d8a31f12082a37a1bacdfd35
CRs-Fixed: 2900829
Add a QCA vendor attribute to ignore SAE H2E requirement mismatch
for 6GHz connection. This attribute is used for testing purposes.
Change-Id: I9d1a5680d3949da1a8009f4689d0c2859f15989f
CRs-Fixed: 2900813
The firmware sends new reason codes to indicate TWT teardown due to
single channel and multi channel concurrency. Update the enum
qca_wlan_vendor_twt_status to represent new reason code.
Change-Id: I49b35ca9570a4faf73f6c93eb957c357576efd1e
CRs-Fixed: 2904365
Add a QCA vendor attribute to enable/disable the Punctured Preamble Rx
support in HE PHY capabilities.
This attribute is used for testing purposes.
Change-Id: I5d0089ddc95beb334c73538431dde3a034a1bc21
CRs-Fixed: 2886737
Add a QCA vendor attribute to configure the driver to disable data
and management response frame transmission to test the BSS max
idle period feature.
This attribute is used for testing purposes.
Change-Id: I106da43f9044bd15727152e04a233376e79e034a
CRs-Fixed: 2886732
Add a QCA vendor attribute to configure the driver/firmware to
use only RU 242 tone for data frame transmission.
This attribute is used for testing purposes.
Change-Id: I32af9b34b335887279a41f64d7e93b14d6f44f41
CRs-Fixed: 2884735
Add a QCA vendor attribute to configure the driver with a specific BSS
max idle period value to advertise in (Re)Association Request frames.
This attribute is used for testing purposes.
Change-Id: Ibe98ab7947b759d9dcd3f963629de4dd6a86b543
CRs-Fixed: 2884705
QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO to get finer details on roaming
behavior, TSF out of sync count, and the latest TX rate, Rate Index used
for the transmission.
Change-Id: I34d112a263a587603f555069c0244f61dc44ec73
CRs-Fixed: 2876411
The response for the respective TWT operations can either be synchronous
or asynchronous (wherever specified). If synchronous, the response to
this operation is obtained in the corresponding vendor command reply to
the user space. For asynchronous case, the response is obtained as an
event with the same operation type.
Drivers shall support either of these modes but not both simultaneously.
The support for asynchronous mode is advertised through the new flag
QCA_WLAN_VENDOR_FEATURE_TWT_ASYNC_SUPPORT. If the driver does not
include this flag, it shall support synchronous mode.
Change-Id: I359e12c5147b0115158d03a7a08d74beca78455c
CRs-Fixed: 2842872
Define the following additional TWT operations:
QCA_WLAN_TWT_GET_STATS, QCA_WLAN_TWT_CLEAR_STATS,
QCA_WLAN_TWT_GET_CAPABILITIES, QCA_WLAN_TWT_SETUP_READY_NOTIFY.
Also define new attributes to qca_wlan_vendor_attr_twt_setup
and qca_wlan_vendor_attr_twt_nudge.
Change-Id: I687fd215c13aa12741d8ba7af23507f930d0ec81
CRs-Fixed: 2842072
TWT nudge is a combination of suspend and resume in a single request.
Add TWT nudge operation and QCA vendor attributes to support
the TWT nudge request.
Change-Id: Iddc4cb6722e88ad9dd65933091bdaa468718f2cf
CRs-fixed: 2822267
Define QCA vendor attributes to dynamically configure TX NSS and RX NSS
to be used with QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION and
QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION commands.
Change-Id: I9b3b3d3c5be2abd01fa8669b10c2961c271ecdbb
CRs-Fixed: 2831257
Add feature capability indication for dbs for the
drivers to advertize support for this.
Change-Id: Ic6941e58a30d6aa6a867a12ddd7a8db5abbb1673
CRs-Fixed: 2821654
Add feature capability indication for Adaptive 11r for the
drivers to advertize support for this.
Change-Id: I28da5c3d7d4d841de980c841b1d4c39be12ed295
CRs-Fixed: 2817358
Define a QCA vendor attribute
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_FULL_BW_UL_MU_MIMO to
enable/disable full bandwidth UL MU-MIMO subfield in the HE PHY
capabilities information field for testing purposes.
Change-Id: I666abb2654603069140bd603ae0377ea01a720fa
CRs-Fixed: 2816951
The connection process fails for several reasons and the status codes
defined in IEEE802.11 specification doesn't cover the locally generated
reason codes. Add an attribute to QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO
vendor sub command which can be used by driver/firmware to report various
additional reason codes for connection failures.
Change-Id: Ibab4696fba34f7a18fb8b5f8601e90c5dfcba89e
CRs-Fixed: 2799153
Currently host does not convert all internal auth types
to qca auth types which results in invalid auth type
indication for big data logging even for some of the
valid auth types.
For example in current scenario connection hapens in SAE
auth type but driver indicates invalid AKM type.
To address above issue add missing auth type and send
proper auth type to user space as part of the big data
logging.
Change-Id: I2612a081385c2bc888afb032cf6fd2a44d886e40
CRs-Fixed: 2803348
Add new QCA vendor attributes to get thermal level from driver.
Driver will return thermal level upon userspace requests or sent
thermal event when firmware indicates theraml level changes.
Change-Id: I86b3ac34466d57cbd713cf72a7eb883677883a21
CRs-Fixed: 2786642
Wake lock stats vendor command attribute names in
the driver are different from the attribute names
in upstream qca-vendor.h.
Change the wake lock stats attributes name in driver.
Change-Id: I761aa07dacd6a7424759ae1e501053428275b113
CRs-Fixed: 2789538
Define QCA vendor attribute in SET(GET)_WIFI_CONFIGURATION to
dynamically configure ANI level.
Change-Id: I422c6301f2e4c207b58a2d85199dd4a47f031236
CRs-Fixed: 2781047
