FW has some usecases when it needs to enqueue frames into hardware. In
BE WLAN chips, some hardware TX desc fields are moved into Tx
banks, hence a TX bank is also needed to queue to HW.
Dedicate a bank for FW usage.
Change-Id: I1f19f0ef85aff4c7592b0f07de4631259da743a6
CRs-Fixed: 3016828
Conditionally compile scan radio special vap stats.
Also rename spcl_vap to scan_spcl_vap to better reflect
funtionality.
Change-Id: I7d7f636209f6aa12cca0a3e808d7ae1fac9f397d
CRs-Fixed: 3009837
Below are the changes in HW headers for E1.5
1) WBM2SW release source enum changed back to lithium values
2) DSCP to tid table num is added in Bank register
3) MCAST ctrl value is moved from Bank to seperate register
Change-Id: I342c451d792b1618dcb62ca9d4c77dcf4d4beeac
In order to support flow overide feature,
AST table has to be split between RxPCU and DDR.
With this split, RX monitor cannot make use of
ast_index to fetch peer as it is not from DDR.
So make use of sw_peer_id to fetch peer.
This sw_peer_id is derived from RX_MPDU_STAT_START_TLV
Change-Id: Ib2a003a2640fded3287c318d2ad59fd3127af9b6
CRs-fixed: 3004363
-Add flag to inidicate special vap configuration
-Add frame type counters while processing tlv
WIFIRX_MPDU_START_E
-Add function to update special vap rx stats
-Add dp pdev param to enable/disable special vap
stats reset
-Add function to reset special vap stats
-Add fucntion to get special vap stats
-Add CDP function to retreive special vap stats
Change-Id: Ia5de6743e472dc86c9e66b9e789c909a57025e35
CRs-Fixed: 3005425
The following configurations are changed
- Change numer of WBM2SWRELEASE rings from 7 to 8
- Use configurable RBM value when enqueuing packets for TX. This is needed
since WBM release ring numbers do not have an easy mapping to RBM values
for HMT1.0.
Change-Id: Idcf9e48e00b7039331fc1837bb1e900b12f19eb3
CRs-Fixed: 2984362
In WBM error path, add handling for packets received with
rxdma_psh_rsn as rxdma_rx_flush. Also add assert for packets
received with an invalid push reason.
Change-Id: I4e445d52f00bbbdca358225aef488da0e8dccaa7
CRs-Fixed: 2978262
Initialize the last_desc_cleared pointer to -1 not 0, and
also fix the check it should always behind tp.
Change-Id: I281e066d45a99ac99d4f3c4e0bcc3f65f14bb589
CRs-Fixed: 2987029
HAL generic APIs which use HW definitons that
do not have same value across all lithium chipset
are moved to header files. So that these will be
compiled with appropriate header files
Change-Id: I6c167afa4212c5e884f5e18ff1ccb3bbbba8f5f5
For WCN7850, all the REO errors are supposed to be handled
by the APPS core. In accordance with this design, re-route
all the REO error frames to the APPS facing rx-error ring.
Change-Id: Id6f956a1459d318a5876696842ca87fa29e1e27b
CRs-Fixed: 2965087
Register, for WCN7850, the hal ops to get the
current PN for a packet from the tlvs.
Change-Id: I9fabc84aee318de2031bfa5f88dafe19b723079a
CRs-Fixed: 2965086
Currently the EAPOL/ARP/DHCP frames arriving as 2K-jump
or out-of-order frmaes are being delivered to the network
stack, without checking for the packet-number sequence.
WCN7850 has hardware support to provide the packet number
of the previous successful re-ordered packet from hardware.
Use this feature to check if the packet-number are in proper
sequence for these EAPOL/ARP/DHCP packets arriving as 2k-jump
or out-of-order packets before submitting it to the network
stack.
Change-Id: I1078452afce4bc00b2509436295e5bd80000feb4
CRs-Fixed: 2965086
Currently the hardware srng register offset is statically
assigned to the handle. This can lead to incorrect index access
when targets (eg: wcn7850) is added which require additional
register offsets to be stored in the hw srng register offset table.
Move to the index based assignment of the srng register offset.
Change-Id: I8e38bdd0c28068029a0267fce706edf4378b9df8
CRs-Fixed: 2965081
WCN7850 has support for near full indication for
the consumer srngs. This interrupt is used to take
preventive actions to avoid ring full watchdog irq
trigger.
Register for the near full irq and add the necessary
ext groups for these near-full irqs.
Change-Id: Ic16381fceabc54e6c52b34dd13abea74cad4d38c
CRs-Fixed: 2965081
HW macros used for hal_rx_wbm_err_info_get_generic_li are
different across chipset. Move this API to header file to
ensure chipset specific HAL is compiled with appropriate
HW headers
Change-Id: I053d243235f187d931048d1fd22293f9142a00c7
hal_reg_write_need_delay is invoked immediately after
q_elem->valid check. The first two instructions in
hal_reg_write_need_delay could be in the CPU instruction
pipeline which could result in possible loading and
dereferencing of NULL srng from an invalid q_elem.
Fix is to invoke hal_reg_write_need_delay just before
hal_process_reg_write_q_elem and also add NULL checks
to avoid the srng NULL pointer dereference.
Change-Id: I2de50b1e78782e3c91a9cb4477f28d91f9c29439
CRs-Fixed: 2973257
To fix the below compilation error, included "hal_be_rx_tlv.h" header file
in hal_be_generic_api.c file.
"cmn_dev/hal/wifi3.0/be/hal_be_generic_api.c:754:40: error:
'hal_rx_tlv_get_pn_num_be' undeclared (first use in this function);
did you mean 'hal_rx_tlv_get_pn_num'?"
Change-Id: I57074967dad8cee98fc8094c4eadc9289b7e7984
CRs-Fixed: 2974607
PN number get function handler is not initialized,
This lead to CFI assert. Add correct handlers for
differnt chipsets.
Change-Id: Ib8836af0d69380da597822d1755bb5dd2309c95f
CRs-Fixed: 2968223
Return LMAC start id also as part of hal_get_meminfo API.
This field is added to hal_mem_info struct.
Change-Id: I013d357cf4337702c06a91ed15e8337469865270
Refactor FISA packet history to not access "struct rx_pkt_tlvs". This is
because this structure may be different for Li and BE chips and should
not be accessed directly and only via hal_soc->ops in common code.
CRs-Fixed: 2888556
Change-Id: I0d9f2785a81c130a2dc506020a02ee5581c0bbd3
Implement core DP rx processing to functions in to corresponding
architecture specific be/li rx files. Keep common utility functions
in DP common files.
Change-Id: I40083e10772fd2b6ce2f1fa9e197f2ad92d0522a
CRs-Fixed: 2891021
