This change removes exposing Demura CWB tap point capability
to userspace.
Change-Id: I7be24a2004ce489fca76593cdb9f75e8b52d4461
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Instead of hard coding the size of the blob data, pass the exact
size retrieved from drm property framework to color processing layer.
Color processing layer has size check to make sure the blob data size
matches the expected size.
Change-Id: I277f9be1ba84e4e4707847756a9ed0ea1ed23f53
Signed-off-by: Ping Li <pingli@codeaurora.org>
The connector detect function is currently implemented as a
callback from the framework, and creates a context before
calling the detect_port_ctx MST callback. This change updates
the callflow so that the framework calls the new detect_ctx
function in the MST case. This removes the need for creating a
new context before calling further downstream functions.
In addition, references to the mst_connector_get_info
function were replaced by connector_get_info to avoid
redundancy.
Change-Id: I224d09e77fad4b6925a42b1bc912a05e3e4d060a
Signed-off-by: Sudarsan Ramesh <sudarame@codeaurora.org>
This change allows signalling of sde fences when sequence number is
less than done_count. In current scenario, fence is not signaled as
the subtraction result is not typecasted to int before updating
the status causing the UI thread to block on sde fence.
Change-Id: I3ca62222e0c67223b9eaf299474a2c282d761d3a
Signed-off-by: Jayaprakash Madisetty <jmadiset@codeaurora.org>
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
During mode enable after idle, rsvp next would be be set without
rsvp cur. Back to back test only should be serialized, but currently
this would be possible right after idle. This is established by
commit 11aab5f9c3 (disp: msm: sde: Fix null dereference errors).
This change updates the condition to poll for rsvp next clear
during this usecase as well.
Change-Id: I300254967cbec69fff8b31545b8d659afc56f283
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Move esd check to write pointer wait instead of during
write pointer timeout. With this change display will avoid
improperly signaling a retire fence and allowing two flushes
to happen within a single vsync in cases where ESD failure
is happening.
Change-Id: I6fbd76a2f6b47d3237039f66a3b1edd1f72a0a1d
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Use the upstream function dma_fence_signal_timestamp_locked to signal
the sde fences with timestamp parameter instead of the downstream version.
Change-Id: I9e0dcc3bafa16e78fe80268f560bf003ac1a2bc1
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
In SDE driver auto refresh disable sequence, seq2 execution
is possible. Avoid error log for every iteration and log
only when seq2 fails.
Change-Id: I1e2b3dcc775bf5fef28fe2e0c6846d3940a2bad1
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
This change ensures that qseed programming to be completed through AHB
path only.
Change-Id: I26270fdf51d1ac8c68c6967b3ee99857be9c801e
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
This change adds line count to info being added to the
event log buffer.
Change-Id: Ic51b12bb3fbff206603ca8265cd916972418d0d2
Signed-off-by: Grace An <gracan@codeaurora.org>
Add support for accepting a smaller output buffer size than full
frame. In this case, input will be cropped as needed and set to
0,0 coordinate in the output buffer.
Change-Id: Ie6d60aa313ae87ce148a08108e09b56c908147da
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
TUI clients are the display sub-drivers that participate
during the TUI transition. They register with the display
TUI notification framework with a list of callbacks functions
that will be invoked during pre/post transitions and for quering
I/O memory that need to be access controlled. This change
adds RSC to the TUI client list.
In Trusted VM, all the sub-drivers are not enabled to avoid
any re-configuration of respective module registers. But the
TUI framework need to know the sub-driver I/O memory ranges
in order to accept the I/O memory list lent by the HLOS VM.
So, SDE provides them ranges by reading from a custom
devicetree property.
Change-Id: I2c4b254d539d04771339ae4a7bf4d296b7a7f91a
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Drm frame-work crtc state doesn't need to duplicate color processing
properties since color processing frame-work caches these properties to
apply across suspend/resume, idle power collapse use-cases.
Change removes copying color processing properties during state duplication.
Change-Id: Ieafa7e5bacdf0ad814d579070c8aaa30c12e887f
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
Canceling delayed_off_work in encoder pre_modeset might not be
executed in all cases, but the following encoder enable might
initialize the work.
This will lead to list corruption as delayed_off work list node
is reinitialized before removing from linked list.
Move canceling delayed_off_work to start of encoder mode_set to
ensure work is canceled before reinitialization.
Change-Id: I38687604f2eedced308ea02019c162022725534e
Signed-off-by: Lei Chen <chenlei@codeaurora.org>
In the event of panel dead scenario, it is possible to receive a
mode set call before the panel has recovered. When this happens,
display should select watchdog TE as the vsync source.
Similarly when detecting a write pointer timeout, if the panel is
dead then watchdog TE should be or has already been configured and
display should not make a change to this vsync selection.
Change-Id: I732c75e54d734b00889151b914b0749ae1f27d08
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
In video mode for fps greater than 60, perf cpu dma latency votes
are not removed during idle fallback. Made changes to remove and
add the perf cpu dma latency votes during idle fallback and idle
exit scenarios respectively.
Change-Id: I8dffc743bd48c96a6022935f71057a0223d9696e
Signed-off-by: Andhavarapu Karthik <kartkart@codeaurora.org>
The hypervisor is renamed to gunyah now. All 'haven' words need change
to 'gunyah' and 'hh' words in hypervisor interface need change to 'gh'.
Change-Id: Ia7ff6d855eb5548540a2f11a781c2555beb23187
Signed-off-by: Cong Zhang <congzhan@codeaurora.org>
Add a new connector property to allow DC dimming feature to set
dimming backlight LUT. This change also adds a connector event
for client to register for backlight info needed for digital dimming
feature, including OS brightness, OS brightness_max, panel_backlight,
panel_backlight_max, and scale factors from ABA and LTM features.
Change-Id: I78f713fb2b965ca24effd973b4dfa9ff07a852f8
Signed-off-by: Ping Li <pingli@codeaurora.org>
Change moves error log to debug log for invalid dspp when process
histogram interrupt, that also removes error logs from userspace
by returning ENODEV.
Change-Id: Ib26b42668ba9e9597cd6eef75d87e679f2d3422f
Signed-off-by: Xu Yang <yangxu@codeaurora.org>
While setting up vsync source, display info is used to decide whether
or not watchdog TE should be used. This change passes display info
as a parameter to vsync setup rather than using the encoder's display
info which is not updated in the case of panel dead error.
Change-Id: I928ee2012eec7bf63f4ba3538082bc3e47d5e99d
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
This change adds allowed_dsc_reservation_switch to determine if
dsc seamless switch is supported for DP. Also, based on the
flag, it determines and populates the required number of
available resources for DP.
Change-Id: I9cd7219a50d352369c5bc8386ce7dc25c30b80b6
Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org>
