Currently the cdp apis are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles, if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev/vdev id or peer mac address, which will be
used to get the respective handles, and hence
avoiding the unwanted access of the handles, if
it has been deleted.
Converged misc_ops
- tx_non_std
- get_opmode
- get_tx_ack_stats
- set_ibss_vdev_heart_beat_timer
- hl_tdls_flag_reset
- set_wisa_mode
- txrx_post_data_stall_event
- update_mac_id
- pkt_log_init
- pkt_log_con_service
- get_num_rx_contexts
- set_wmm_param
- flush_rx_frames
- bad_peer_txctl_set_setting
- bad_peer_txctl_update_threshold
- txrx_data_stall_cb_register
- txrx_data_stall_cb_deregister
- vdev_set_driver_del_ack_enable
- get_intra_bss_fwd_pkts_count
- mark_first_wakeup_packet
- register_pktdump_cb
- unregister_pktdump_cb
- pdev_reset_driver_del_ack
- runtime_suspend
- runtime_resume
CRs-Fixed: 2539811
Change-Id: I3080df033d6411d7078a322224b914bda2fddc0e
Fix compilation error in DP_PRINT which is
seen when compiled for lithium datapath.
CRs-Fixed: 2567068
Change-Id: I4bb7bb14a2e521645be6e2677a44a78fa79fcb0b
A build error happens if "%lu" is applied to a size_t variable.
Change the format to "%zu" in dp_print_tso_stats().
Change-Id: Ib9e7ff5de91a8d5de091f8adae003f0ce0258acb
CRs-Fixed: 2560138
Currently the cdp apis are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev/vdev id or peer mac address, which will be
used to get the respective handles, and hence
avoiding the unwanted access of the handles if
it has been deleted.
Converged mob_stats_ops
- clear_stats
CRs-Fixed: 2539824
Change-Id: Id424b939c8ef77bd9fae55eaa4c08023efc32093
Currently the cdp apis are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev/vdev id or peer mac address, which will be
used to get the respective handles, and hence
avoiding the unwanted access of the handles if
it has been deleted.
Converged flowctl_ops
- flow_pool_map_handler
- flow_pool_unmap_handler
- dump_flow_pool_info
- tx_desc_thresh_reached
CRs-Fixed: 2539812
Change-Id: I084d3878df84778622340e87bddf90acd3e669d6
Memory leak fixed in dp_rx_tid_delete_wifi3 in the case
where update cmd send fails. Add the desc to the front of
free desc list and set a flag to ensure that the update
cmd is resent from delete rx_tid callback. In the same
callback ensure that the update cmd desc is sent out first
and then proceed to free other descs by sending out the
flush cache cmd for each of those descs.
If the flush cache cmd is not sent successfully to REO,
add the REO descriptor back to the free desc list and
defer the deletion to the callback function. This update
is made under MCL feature flag REO_DESC_DEFER_FREE.
Add a soc level stat to indicate the reo send cmd failures.
Change-Id: I4e4cf47223d5325a53f2df22571895489d033ba3
CRs-Fixed: 2551028
The datapath vdev handle is not to be used outside
datapath layer. So the cdp api for getting txrx stats
will pass vdev_id instead of the vdev handle.
Pass vdev id instead of vdev handle for the cdp api
used to get txrx stats. Use the vdev_id to retrieve
the corresponding vdev handle in the txrx stats handler.
CRs-Fixed: 2560364
Change-Id: I57b6c6b232d122583e85929fa972d68bc54e84e0
Expecting a fresh skb from reo exception ring with skb->len of 0 but are
unexpectedly receiving one with len greater than 0, so will drop the
packet.
Change-Id: I1079b40dbb3180dd1ccd87f47668f75d10003934
CRs-Fixed: 2556164
Add debugging infrastructure to record every event posted to reo
command ring. The infrastructure maintains the record of the last
64 events posted to the ring.
Change-Id: Id56fc352050eb664a64b0abb767f3b4a6b4c3aa3
CRs-Fixed: 2552822
NOC error is observed when PCIe accesses IPA GSI RX doorbell
register even before IPA clocks are ON. Currently for SAP vdev,
default REO dest is set to REO2SW4 and with RX hash being
disabled, packets will finally land on REO2SW4 ring. If packets
arrive on REO and are routed to SW4 ring, REO HW will ring
IPA GSI doorbell address and thus the NOC error will occur
because IPA clocks are still OFF which should be set to ON
by WLAN via ipa_wdi_enable_pipes API.
Fix is to set DEST_RING_MAPPING_4 to SW2 for REO dest ctrl
register such that packets arrived before IPA pipes are
enabled will be handled by WLAN host. Note that
DEST_RING_MAPPING_4 will be remapped to SW4 after IPA pipes
are enabled.
Also correctly configure REO dest ctrl register when RX hash
feature is disabled when enabling and disabling IPA
autonomy.
Change-Id: Ifd471bbe2e4a0e66e080d9ae51fb2a3600fd87e6
CRs-Fixed: 2554023
When a particular vdev is deleted, the corresponding rx
packets which have been queued to the rx thread are not
flushed. Hence when such packets are submitted to the
network stack, the dev for this skb will be invalid,
since we have already freed the adapter.
Flush out the packets in the rx thread queues, before
deleting the vdev.
CRs-Fixed: 2543392
Change-Id: I2490d0f5ce965f62152613a17a59232521ca058f
Currently we do not update svld with 0 on receiving
delba or during a teardown. This change sets update_svld
and resets svld flag to 0.
Change-Id: Ic5eb5732946c47d7c20230f225fbb1bf54621506
CRs-Fixed: 2514183
The reo destination ctrl registers
HWIO_REO_R0_DESTINATION_RING_CTRL_IX_2_ADDR and
HWIO_REO_R0_DESTINATION_RING_CTRL_IX_3_ADDR are used for mapping
msdu packets to different reo rings.
For QCA6390,
reo remap values varied from 0 - 7 so every 3 bits in
the register were used to map to a particular reo ring.
For QCA6490,
reo remap values vary from 0 - 9 as two extra reo rings are
added so we are using 4 bits in the register to map to a
particular reo ring.
Use the macros directly provided in the header files
to map reo rings.
Change-Id: I6d64266d3b388b3453b7df959048e3d693cf0a40
CRs-Fixed: 2544102
For RX defrag, if incorrect SW peer ID is got from REO exception
ring descriptor, the expectation maybe is AP BSS peer ID but it
is replaced by other peer ID which like SAP self peer that won't
do dp_peer_rx_init, then in dp_rx_defrag_cleanup no chance to
run dp_rx_clear_saved_desc_info to free dst_ring_desc since
rx_tid[].array is NULL, memory leak happened.
Call dp_rx_clear_saved_desc_info always in dp_rx_defrag_cleanup.
Change-Id: Ib1ebfbd976c817d5238ee48196388a8c88189ebc
CRs-Fixed: 2549913
Add an atomic variable to indicate IPA pipes are connected.
Use it to ensure that SMMU mapping for rx buffers is sent
to IPA even if REO is not remapped but IPA pipes are connected.
Change-Id: I5d82dc073fc2f0de6df102f7bfd2a1e945297aa8
CRs-Fixed: 2552128
Add support to account for TSO jumbo packets on the
Tx path and print the statistics using dumpStats 3.
Change-Id: I6cc446df5c84e3ac436d922935fcd559e0704ec5
CRs-Fixed: 2356244
Add the soc context for ol_txrx,
The soc layer is used to hold the ol_pdev context.
CRs-Fixed: 2539807
Change-Id: I751ad61de55db9d86624b8b5e18b0981ffb0338d
Check if REO ring is near full at the end of dp_rx_process. In case the
ring is near full, reap the packets in the ring (and replenish, send to
upper layer) until the quota allows. Ignore the HIF yield time
limit in such cases.
This change is needed to prevent back pressure from the REO ring(in case
it gets full). Backpressure from REO ring (to LMAC) may lead to a
watchdog and eventually a FW crash. Hence, avoid such a scenario by
reaping as many packets as the 'quota' allows when the REO ring is in
aforementioned condition.
A sid-effect of this change would be that at times the RX softirq may run
longer (till the quota limit) than the configured HIF yield time.
However, this logic is not expected to kick-in in perf builds. The issue
is reported for a defconfig build where lots debug options are enabled
in the kernel which can slow the processing down.
Change-Id: I2eb6544c159ec5957d10386b1750fd96473fe13a
CRs-Fixed: 2540964
While handling a frag with no peer, donot set packet length as this is
already done while handling the fragment before re-injection into the
REO. Without this, qdf_nbuf_set_pktlen will fail while doing a skb_put
on a non-linear packet.
Also, donot use L2 header offset while doing a pull head for the RX frag.
Change-Id: Ie1faeebf548b589ad524b31d51444c5934a7b976
CRs-Fixed: 2502756
In the present scenario, in case of Multicast Enhancement when
the multicast packet is received the packet is converted to
unicast packet and send to list of clients in the hyfi table.
During conversion descriptors get allocated from ME pool
for each client and the Tx MSDU descriptor is send to HW
for transmit. On TX completion descriptors are freed and
added back to ME pool.
But if the HW enqueue is failed then the current TX descriptor
is freed and added back to ME pool. But the remaining descriptor
are neither retried nor freed thus resulting in Host Asserted
Crash.
So, adding a fix that if the HW enqueue is failed for ME packet,
free that descriptor and retry HW enqueuing for the remaining
descriptors.
Change-Id: Ibfeb1b07ee8fab4bf066689d0258bb23fb2aa9f8
CRs-Fixed: 2545818
Currently for REO reinject path, first fragment is in the
linear part of the skb buffer while other fragments are
appended to skb buffer as non-linear paged data. The other
point is that for REO reinject buffer, l3_header_padding is
not there, meaning ethernet header is right after struct
rx_pkt_tlvs.
Above implementation will have issues when WLAN IPA path is
enabled.
Firstly, IPA assumes data buffers are linear. Thus need to
linearize skb buffer before reinjecting into REO.
Secondly, when WLAN does IPA pipe connection, RX pkt offset
is hard-coded to RX_PKT_TLVS_LEN + L3_HEADER_PADDING. Thus
need to pad L3_HEADER_PADDING before ethernet header and
after struct rx_pkt_tlvs.
Change-Id: I36d41bc91d28c2580775a1d2e431e139ff02e19e
CRs-Fixed: 2469315
During cleanup path in STA mode, remove false assert as there is just self
dp_peer with no TX and RX TIDS setup.
Change-Id: Id6be7a6b3823c41ddbff67926bda240a4e9b6bd0
CRs-Fixed: 2547680
Add hal_rx_get_rx_sequence API to retrieve
rx sequence value based on the chipset.
Change-Id: I8377b96dfe04e9695a183482d9fcc4a804f845e0
CRs-Fixed: 2522133
Add the following support for QCA6490:
1. Initialize the qca6490_hal_hw_txrx_ops
2. Initialize the hw_srng_table
3. Attach hal_qca6490_attach
Change-Id: Ic53c520ef804eb4fbe1434c704e9040c83011d3d
CRs-Fixed: 2522133
Implement hal_rx_tlv_get_tcp_chksum API
to retrieve tcp_udp_checksum value
based on the chipset.
Change-Id: Ifab970f10af06f8c0cdbd14d57cb66b49bae1648
CRs-Fixed: 2522133
Add the following HAL macros:
1. HAL_RX_MSDU0_BUFFER_ADDR_LSB
2. HAL_RX_MSDU_DESC_INFO_PTR_GET
3. HAL_ENT_MPDU_DESC_INFO
4. HAL_DST_MPDU_DESC_INFO
Add relevant function pointers to retrieve
descriptor info from the macros based
on chipsets.
Change-Id: I99ce7566a668180c7849eedea915b6f23a8dbf35
CRs-Fixed: 2522133
Implement hal_tx_desc_set_mesh_en API
based on the chipset as
the macro to set mesh_en value is
chipset dependent.
Change-Id: I43c85e4ed6fd4f9992de5b71857cdb8becd1dd36
CRs-Fixed: 2522133
Implement hal_rx_hw_desc_get_ppduid API based
on the chipset as the macro to retrieve
ppduid value is chipset dependent.
Change-Id: I7d3457d731ea486f04367f98f9f18d3f1c0fcfd7
CRs-Fixed: 2522133
Implement hal_rx_is_unicase API based
on the chipset as the macro to retrieve
is_unicast bit value is chipset dependent.
Change-Id: I38807f478c295309adf2a07ce9010b1bc04c734e
CRs-Fixed: 2522133
Implement hal_rx_get_mpdu_sequence_control_valid
API based on the chipset as
the macro to retrieve sequence control valid
value is chipset dependent.
Change-Id: I01a006094d0330060e9ff1a91200c48c2426f38d
CRs-Fixed: 2522133
Implement hal_rx_mpdu_get_addr4 API based
on the chipset as the macro to retrieve
addr4 value is chipset dependent.
Change-Id: Ie35d01de1619a8ab540bb1b2019a15b436efb7d4
CRs-Fixed: 2522133
Implement hal_rx_mpdu_get_addr3 API
based on the chipset as
the macro to retrieve addr3 value is
chipset dependent.
Change-Id: I3983599b656e82170de5905c08daee3ec164e7a0
CRs-Fixed: 2522133
Implement hal_rx_mpdu_get_addr2 API
based on the chipset as
the macro to retrieve addr2 value is
chipset dependent.
Change-Id: I4026db892d4f2f41db72c50f780ba898b8a17fa7
CRs-Fixed: 2522133
Implement hal_rx_mpdu_get_addr1 API
based on the chipset as the macro to
retrieve addr1 value is
chipset dependent.
Change-Id: I7ed88f2243d397c9d605a08d3b93e17f0004c63d
CRs-Fixed: 2522133
Implement hal_rx_get_mpdu_frame_control_valid API
based on the chipset as the macro to retrieve
frame control valid value is chipset dependent.
Change-Id: I49d16ae44b2e9567ff746d2088058f0c1025ea40
CRs-Fixed: 2522133
Implement hal_rx_mpdu_get_fr_ds API
based on the chipset as the macro to
retrieve for_ds value is chipset
dependent.
Change-Id: I6d41d02ac50cae752567d98645f0447cc122a84f
CRs-Fixed: 2522133
Implement hal_rx_mpdu_get_to_ds API based
on the chipset as the macro to retrieve
to_ds bit value is chipset dependent.
Change-Id: I36d9d14e226bcc604b91d8aecbe52836c5a12272
CRs-Fixed: 2522133
Implement hal_rx_mpdu_start_sw_peer_id API
based on the chipset as the macro to retrieve
sw_peer_id value is chipset dependent.
Change-Id: Ifebaf2430731f5e0593dde4789d721e9fe7ce7c1
CRs-Fixed: 2522133
Implement hal_rx_get_mpdu_mac_ad4_valid API
based on the chipset as the macro to retrieve
mac_ad4 value is chipset dependent.
Change-Id: I9d7cc90e798d4f0775e915fe6edcb1a1f5129490
CRs-Fixed: 2522133
Implement hal_rx_msdu_end_last_msdu_get API
based on the chipset as the macro to retrieve
last_msdu value is chipset dependent.
Change-Id: I561c28a49062d7b650e68c5a4ce4da0183be34d6
CRs-Fixed: 2522133
