This change is made to support 100ms VBV delay for
aggressive rate control in iris3 hw.
Video buffer verifer helps to ensure that encoded stream
doesn't overflow or underflow the decoder's buffer.
iris3 hw is capable to decode data in 100ms VBV buffer window.
Adaptive Blur (Internal encoder feature): This is other enhancement
which supports adaptive blur feature on iris3 for CBR_VFR
(Constant bit rate_Variable frame rate)/CBR_CFR
(Constant bit rate_Constant frame rate) rc types apart from
already supported VBR_CFR. Unlike iris2, there is no need to enable CAC.
Below are the listed scenarios when it is enabled/disabled on iris3-
- Supported only for 8 bits encoding (H.264 & H.265).
- By default enabled for VBR_CFR/CBR_VFR/CBR_CFR RC without CAC enabled.
- No dependency on CAC to be enabled.
- Adaptive Blur is disabled if minquality_VBR is enabled
- Adaptive Blur is supported for 3 RC types: VBR_CFR, CBR_VFR & CBR_CFR
- If any one of the features (scalar/external blur) enabled, encoder
disables adaptive-blur.
- Static property available to disable adaptive blur feature
Below are the listed scenarios when it is enabled/disabled on iris2-
- Supported only for 8 bits encoding (H.264 & H.265).
- By default enabled for VBR_CFR RC type with CAC enabled.
- Dependency on CAC to be enabled.
- Adaptive Blur is disabled if CAC is disabled
- Adaptive Blur is disabled if minquality_VBR is enabled
- Adaptive Blur is not supported for any other RC types except: VBR_CFR
- If any one of the features (scalar/external blur) enabled, encoder
disables adaptive-blur.
- Static property available to disable adaptive blur feature
For backward compatibilty:
- Removed CAC as parent from msm_vidc_kalama.c.
- Removed cac query from msm_vidc_adjust_blur_type in msm_vidc_control.c.
- Moved legacy code to newly created function msm_vidc_adjust_blur_type_iris2().
- Added msm_vidc_adjust_blur_type_iris2 in BLUR_TYPES in msm_vidc_waipio.c
Change-Id: I49dec7e2574496d1b32babde55c0187866ca21d2
Signed-off-by: Mahesh Kumar Sharma <quic_smahesh@quicinc.com>
-Removed unwanted functions
-Removed unwanted part of code from function definitions
-Added proper format specifier according to the data type.
Change-Id: I700202f1cf588506b329d202ce3e2729c027dcae
Signed-off-by: Gaviraju Doddabettahalli Bettegowda <quic_gdoddabe@quicinc.com>
Signed-off-by: Govindaraj Rajagopal <quic_grajagop@quicinc.com>
AV1 bitstream frames can have different resolutions than
sequence resolutions. Subscribe to BITSTREAM_RESOLUTION and
CROP_OFFSETS metadatas and exopose them to clients so that
clients can receive per-frame resolution and crop.
Change-Id: I7c0503f25ddde201979d13ff18028681f685d649
Signed-off-by: Mihir Ganu <quic_mganu@quicinc.com>
- Do not clear V4L2_FL_USES_V4L2_FH flag because this
flag indicates that file->private_data points to
&struct v4l2_fh.
- Initialize v4l2 ctrl handler with driver ctrl handler.
- Add ctrl ops for g_volatile_ctrl to return updated
value of volatile ctrls from driver.
Fixes: v4l2-compliance:
testPrio (VIDIOC_G/S_PRIORITY).
testQueryControls (VIDIOC_QUERYCTRL).
Change-Id: Ibe4b6fa67d2c02a5afeb627f2060e4761c5ef717
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Add AV1 codec, profile and level defintions and controls in UAPI.
Add these controls as private controls in video driver.
Change-Id: I58edec2d7fabceaa405708c99a75997c9f454022
Signed-off-by: Mahesh Kumar Sharma <quic_smahesh@quicinc.com>
Max mbps has to be calculated using max fps.
Change-Id: Ic0e3b337c7327e9a9bd4ada6b2008ccb6fa1be04
Signed-off-by: Priyanka Gujjula <quic_pgujjula@quicinc.com>
check max mbpf as well while allowing
the real time session.
Change-Id: I1091582a02e01a4daa9c58ec5b50400b7d856610
Signed-off-by: Manikanta Kanamarlapudi <kmanikan@codeaurora.org>
Avoid setting same GOP size to fw dynamically to avoid unnecessary
generation of IDR frame from firmware.
Change-Id: I50c61e9f86ebc9c8a3834fbceb525666b7b194bb
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Check for max supported secure sessions before allowing
any new secure session to limit secure sessions count by
max supported value.
Change-Id: I72d22c5e592eeb662d18018f6d880104992d570b
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
In msm_vidc_packetize_control api, there is a stack-out-of-bounds
possibility. So added change to fix this issue.
Change-Id: I9c9a0217b55dd2586cfd6f814401c80ddb0c011f
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Cap chroma qp offset value other than -12 as 0.
Change-Id: I0ca9c4844ab835a9365e695f38deff90768191aa
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Sequence change property would configure firmware to generate psc at every
key frame. This property is configured based on low latency settings from
the client.
For cases, when client sets low latency from 1 to 0, the hardware would
continue to run in direct mode (low latency mode). Since the sequence
change property gets disabled, there would not be psc from firmware to
change the mode to 2 stage. Hence the sequence change property to be reset
only during psc handling.
Change-Id: Ie8e17e44c921f036763f6f390397d4d812120e23
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
There are few apk which does not set the rate. As per the design,
video sessions should run in non real time mode for such sessions.
It is leading to high power as the resources are clocked to max
in non realtime mode.
Keeping the mode as real time for such sessions.
Change-Id: I072b33038b1169788f37711ebf6cb069d0f07381
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
- make B and P frame QP controls as dynamic.
- enable I/P/B QP to fw as and when these
controls are set to the driver.
- remove HEIC qp support.
Change-Id: I7f45ab0bda75df8128bbbdfcebe66c2cae208b06
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Priority level was not determined at few sequences.
Determine the priority level and set to firmware, if
there is a change in driver and firmware priority.
Change-Id: I97861fd4ce8cfb7cf828a8da9a5ce8ba900280ef
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Currently driver prints hex values for codec type, pixel
format and port number. So added change to print strings
instead of hex values.
Removed unnecessary logs to avoid overlogging timeout
issues.
Change-Id: Ia44401990797dc20eae0a35631e9ed6a0b094c20
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
- misc fix for setting frame qp, min qp, max qp.
- seperate LEVEL database entry for encoder and
decoder as max level supported by encoder is 6_0,
but decoder supports upto 6_2.
Change-Id: Ia0a0a717e73e55a8b6933421e3eb55c3831524b2
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Currently session_error check is scattered at multiple places,
So check for session error at ioctl entry point itself(for set
type controls only).
Cleanup &inst->response_works.list as part of session close to
avoid leaks and remove unused variables from inst struct.
Change-Id: I349ec845cc71814b33a94ac07c7628304ddae564
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Add strict check in msm_vidc_check_mbpf_supported() to
reject image session, if total image load exceeds 16K.
Added msm_vidc_print_insts_info() support to print all
running instance info, if new session is rejected due
to mbpf/mbps checks.
Change-Id: I98bab985fcf4f4d20c6f263c48e0c701ec86ab6f
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Decoder supports dynamic low latency. When client configures the
video session in low latency mode, driver would configure the
firmware such that HFI_CMD_SETTINGS_CHANGE is triggerred on
sync frame boundary.
Change-Id: Ie70eaaeb8ad420db926f0d99f77723476deee400
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
[1] Irrespective of layer encoding type P or B, always
caliberate gop size to have gop size multiple
of sub gop size.
[2] Do not cap enh layer count value to max 1 value when
cvp is disabled.
Change-Id: I10f602202ce007707c0fee76d9f847db70798754
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Add support to honor client enablement of csc custom
matrix and set csc coeff to video firmware.
Change-Id: I14d702eb7033541aa439bebe11df7fc4aa49ffdb
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Deprecate custom pipe setting and use the hfi setter
to configure it alongwith other configurations.
Change-Id: Iffbd25df89f43cf77c1fa85ffa97601a31998410
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Latency property is set to firmware during streamon output port,
if set as part of initial configuration by client.
During runtime, the property is set as and when configured by
client.
1. Make the latency property dynamic for decoder.
2. For encoder, the same gets set to firmware with regular
v4l2 set properties.
3. For decoder, set the property explicitly during streamon
output port.
Change-Id: I35990614b95e57f113ddacfc2272cad6ae0dde82
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Allow max 1 enh layers when cvp metadata is disabled for HB
layer type.
Change-Id: If6e33462e8be36a4ca1fb1f253875678b697c05a
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
[1] External blur is disbled to firmware if either blur width or
blur height exceeds driver crop width or crop height.
Also, it is disabled when both blur width and blur height is
equal to blur width and blur height.
[2] fix b_frame adjustment calculation formula.
Change-Id: I71458b72095542f12c31094f7b9fc3bd34a7c66b
Signed-off-by: Akshata Sahukar <asahukar@quicinc.com>
Added support for V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN_10_STILL_PICTURE.
It willbe used in 10bit image encoding usecases.
Change-Id: I14877547f1f4792eefb0ea6bcecf2643627c125a
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Fix the issue where bitrate cap database value is
incorrectly updated to dynamically client set layer bitrate
value when layer bitarte is not set.
Change-Id: I0f66c056c8ea0d053f8347dd003b61193258687e
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
