Move away from the private and private_flags fields from drm_mode,
as it is being deprecated in latest kernel version. Instead, Add
msm_display_mode as a wrapper to be used in downstream to store these
parameters. Also, store msm_mode in connector_state to be accessed
in commit path.
Change-Id: Ia5bdebe75f00aa15fb7db4dc3a0d50c30894a95c
Signed-off-by: Orion Brody <obrody@codeaurora.org>
This change replaces kzfree with kfree as kzfree has been
renamed.
While moving to the latest 5.10 tip, additional small changes
were required to resolve compilation issues:
set_dma_ops has moved from dma-mapping to dma-map-ops header.
This change includes the new header file required.
drm_panel_add returns void, this change removes the expected
return value check.
drm_prime_pages_to_sg takes an additional parameter. This change
passes in the drm_device pointer the function is looking for.
Remove an unused variable in sde_crtc vblank function.
Change-Id: I47c085c0cb64432873c2e750ae64cbdc2b5340da
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
This change adds DRM_MODE_SEAMLESS to private flags downstream,
as it was deprecated from drm UAPI. Additionally, this will
update the is_mode_seamless function to access the seamless
flag from private flags.
Change-Id: Idea0b4ac8e71063c000f582d3228bc0a50a6a8e6
Signed-off-by: orion brody <obrody@codeaurora.org>
Commit 62afb4ad425a ("drm/connector: Allow max possible encoders
to attach to a connector") enables additional encoders per
connector through use of a mask rather than encoder ids.
This change updates the driver when looking for an encoder
for the connector to look through the list of all possible encoders.
Change-Id: I69cc7c38cd0a9842ed2f15712feeb3c6b88daadf
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Commit 2b07021a940c ("debugfs: remove return value
of debugfs_create_u32()") removes the return value
from debugfs_create_u32. This change updates the msm
driver to remove cehcks on this return and corrects
for unnecessary line wraps.
Change-Id: I8d50dd7168921edfb2d5edad13941f91117d3c30
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Commit a25b988ff83f ("drm/bridge: Extend bridge API to
disable connector creation") and commit ee68c743f8d0 ("drm: Stop
including drm_bridge.h from drm_crtc.h) add additional input flags.
This change adds fixes to the drm bridge attach API and includes
relevant drm_bridge header files.
Change-Id: I85e84eaff7df2995243896108a217fae81716b63
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Commit 6dbe0c4b0fc0 ("drm/panel: Initialise panel dev and funcs
through drm_panel_init()") and commit ba2fad4c9648 ("drm/panel:
Add and fill drm_panel type field") modify input parameters for
drm_panel_init. This change updates the relevant changes to the
dsi driver by passing in the device and panel type.
Change-Id: I76a271fea08190bd8633831442ca48882f8a97e6
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Commit 05193dc38197 ("drm/bridge: Make the bridge chain
a double-linked list") creates a bridge chain linked
list. This change updates the relevant changes to msm
driver to use the list to find the bridge associated to
the encoder.
Change-Id: I59eb2910be96f4fff7bdbeb040d6ad204c41d747
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Commit 12c683e12cd8 ("drm: bridge: Pass drm_display_info to
drm_bridge_funcs .mode_valid()") passes the drm_display_info to
mode valid. This change updates relevant changes to dsi display,
that will make it available during bridge validation.
Change-Id: I2772e9e3920de940f22341be5019213d562352ff
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
This change moves the backlight update operation from
drm bridge enable to connector post kickoff.
When timing engine is enabled with programmable fetch
enabled, the timing engine will start counting from
the prog_fetch_start point (which is somewhere in VFP).
It’s a grey area from that point to the actual panel
vsync and SW should not trigger DMA command during that
time.
During display resume, sometimes the INTF timing engine
do not get enabled completely at the first vblank irq.
The backlight update cmd transfer trigger as part of the
drm bridge enable can also take place at the same time,
that may cause DSI cmd transfer failure.
Change-Id: I2722d3c23012ef0e7bcc7f728ec5658318ce4e60
Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
This change enables the DMA CMD scheduling as default for
video mode panels.
In video mode panel, if the DMA is triggered very close to
the beginning of the active window and the DMA transfer
happens in the last line of VBP, then the HW state will
stay in ‘wait’ and return to ‘idle’ in the first line of VFP.
But somewhere in the middle of the active window, if SW
disables DSI command mode engine while the HW is still
waiting and re-enable after timing engine is OFF. So the
HW never ‘sees’ another vblank line and hence it gets
stuck in the ‘wait’ state.
Scheduling the DMA cmd to the first line in VFP fixes
this issue.
Change-Id: If9e5bd1923c012f10dee50c791a2b2b001d97553
Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
Add support for 5nm DSI PLL C-PHY shadow clocks, which
will be used during dynamic dsi clock switch.
Change-Id: I55b11f2d0cffd8494d4641e9b2de0b88e7229978
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
As per the HW requirements it is highly recommended to use DMA start
window to trigger broadcast commands. If not used then it can
result in a hardware hang with the DSI controllers going out
of sync. This behavior is even more prominent in cases of higher
refresh rates. As part of the change we change the default DMA
scheduling behavior to default to maximum possible DMA window
in case it is not specified in the panel device tree.
Change-Id: Ied4df9063664cedbc18ce009054d4e5ecae30ab2
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
The rechecks count in dsi_display_status_check_te defines the
number of times the TE status needs to be checked before exiting.
Avoid the execution if rechecks is set to zero as it would avoid
unnecessary irq status changes.
Change-Id: Ice31701ac06f5b0a82f29b5f415dcb0b055e7b16
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
when a broadcast DSI command is scheduled, the command can get
triggered close to the schedule line. This might cause DMA
timeout. This change reads the video line count from
MDP_INTF_LINE_COUNT register and checks whether DMA trigger
happens close to the schedule line. If it is not close to the
schedule line, then DMA command transfer is triggered.
Change-Id: Ida92e63e46b4cc703d57ce24097834f810776aa8
Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
Add check to avoid the dsi panel status check with TE
method as the GPIO support is not available in Trusted-vm.
Change-Id: I5ad6e7b77b189b5150302ab34767dfc4d97aaf61
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add support to trigger ESD through debugfs by directly
modifying the reset GPIOs TLMM register in trusted-vm as GPIO
driver support is not enabled.
Change-Id: I859affe69c13dbe115a48b0a63a600a57027db58
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Parse all the GPIO pins used by the DSI host and the display panel
along with its register ranges and store it in panel struct. This
avoids parsing the device-tree everytime during transitions between
trusted and primary vm.
Change-Id: Ibbb646358c0409703afda1c4f758f044fc8c0001
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Currently, mdp_intf_line_count and mdp_intf_tear_line_count register
addresses are defined in dsi_ctrl_hw for debug feature. But mdp_intf
base address is target specific and independent of dsi controller
version. This change adds support for parsing the mdp intf base
address from dt, thereby remapping using base + offset addressing.
Change-Id: Ibb72dfe84a786a5c8b95f6a400e8333f6b46814a
Signed-off-by: Lipsa Rout <lrout@codeaurora.org>
Drm driver will remove the same mode that defined
in dsi panel dtsi. But the mode count was not updated,
so when checked drm mode, need to recount the mode.
Change-Id: I51a2c40ceb7d4ee83a15f74d9d724b4fb9c8a618
Signed-off-by: Zhao, Yuan <yzhao@codeaurora.org>
This change adds dsi display ramdump support when DEBUG_FS
is not enabled.
Change-Id: Ic6659a9380acd5eb55a3270d3e3b7016a9cd2bd7
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
During ESD check failure, DSI video engine can get stuck
sending data from display engine. In use cases where GDSC
toggle does not happen like DP MST connected or secure video
playback, display does not recover back after ESD failure.
This change adds support to perform soft reset when DSI
video engine gets stuck.
Change-Id: I9cb31e6c71c4da171f9fe22fc3bee9175711831d
Signed-off-by: Ritesh Kumar <riteshk@codeaurora.org>
Change clears the DSI TX command buffer allocated for debugfs
command transfers and destroys the command packets in case of
error during command transfer.
Change-Id: Ia1e822b9b60d44f7eba325116d416916419471fa
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
The change batches DSI commands sent using the debugfs node, in a
separate buffer from the TX command buffer to ensure that they are not
triggered before the last command bit is set. Once the last command
bit is set the buffer is then copied to the DSI TX buffer and triggered.
Change-Id: I9ba624e4e19341696a974994817603315c6c8a45
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Currently, PLL_CFG1(1:0) register is updated with cached values
in dsi_pll_enable. This can create issue when UEFI and kernel
cfg1 programming is not same. To fix it, return cached value
of cfg1 when its read in pclk_mux_read, so that pclk_mux_write
is called and cached value is updated.
Change-Id: I1e45ff0685797bf4dd2e3a52af4753425f31edfc
Signed-off-by: Ritesh Kumar <riteshk@codeaurora.org>
Currently, changing panel configuration from firmware approach is present
for single display. This change adds support for secondary display using
firmware approach.
Change-Id: I8095dceed1567d8582c7473c0ac7f59c4666a200
Signed-off-by: Lipsa Rout <lrout@codeaurora.org>
In current implementation qsync min fps is single value.
It is same for all the list of supported dfps list.
Added support for new dt entry dsi-supported-qsync-min-fps-list
corresponding to the fps supported in the dfps list
dsi-supported-dfps-list.
Change-Id: Ifd5309c2f51865a3c0d9fadb65cbcd291b6ef42b
Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org>
This change adds support to have same panel names for dual displays.
Without this change, the secondary panel bind will fail if it has the
same panel name as primary since the primary panel debugfs directory
would have been created during its display bind and when display bind
for secondary panel is initiated with the same name it will try to
create a debugfs directory with the same name resulting in bind failure.
This change appends a string as secondary in the panel name and creates the
debugfs directory.
Change-Id: I2bd25672ce0105a3b8225bbf17e13d4e373ad10b
Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
Currently, in firmware approach, the panel node is null
for secondary display. As a result, the number of display
remains one, in case of dual display also. This change
updates the number of displays.
Change-Id: I4b945b8b94d931e0dedf7ca7b27cb1a288b9d6ab
Signed-off-by: Lipsa Rout <lrout@codeaurora.org>
For phy ver 4.0 chipsets, configure DSI controller and DSI PHY to
force clk lane to HS mode always. This change was missed while
propagating from 4.19 to 5.4.
Change-Id: I60370034f7b9ed5d036d9d22f0807250afbcbcd5
Signed-off-by: Ritesh Kumar <riteshk@codeaurora.org>
Change decreases logs during a mode set in dsi_display and adds the
info to event logs.
Change-Id: I3bbe328f942008004c15b39230dd8be3e4cb64b5
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
