1) select lower bw vdev link as primary umac for first station
2) Added support to increase group size to distribute stations
on all PSOCs
Change-Id: Ic6762fbe8e6bc5feef70ddaaa118af121d38a1f4
CRs-Fixed: 3366442
As of today, dp_peer.c has the peer management and rx_tid
functionality(create/setup/remove) which is used by the REO HW.
WCN6450 does not have REO HW and dp_rx_tid functionality is not
required for WCN6450. Hence, separate out dp rx tid functionality
from dp_peer.c so that we can avoid compiling unnecessary code
for WCN6450.
Change-Id: I322823704f38ff72e485f050941be6b1254bad09
CRs-Fixed: 3383330
Move cfr monitor filter cdp func ptr to cdp mon ops structure.
cfr monitor filter cdp function is different for 1.0 and 2.0
hence moving the func ptr to mon ops structure ensures that
func ptr is initialized appropriately.
Change-Id: I82b9c85e96f2f219521ae6ed908ade120081c748
CRs-Fixed: 3428791
Since special vendor roam log is not need for common roam,
add flag to filter the log.
Change-Id: Ide67de16ae68c507a7b4e81672cbf5e0fc0e4c5d
CRs-Fixed: 3442621
In the case of WCN6450, WBM HW block is removed in the UMAC.
TX completions come via HTT messages. Add logic to handle
HTT TX completion messages from the firmware.
Changes are specific to WCN6450 and hence implement the logic
in the arch specific code.
Change-Id: I447020354ce26e8948e4b49648c434fb2ed302cd
CRs-Fixed: 3381814
Currently 0x400f0000 is assigned to 2 helium targets
Remove WCN3990_v2_2 from the SOC ID entries and keep
correct target for this ID.
CRs-Fixed: 3432410
Change-Id: Iab5c6ade70038953e729e4e7994484d4f192022b
If only a single filter is installed,
then the ip version of the second filter
param will not be set. Hence fix the check
for ip version in htt layer as it is already
verified when received from the IPA layer.
Change-Id: I05dff71aa27a254023599df0cbab51bafd0c4f82
CRs-Fixed: 3441760
rx_user_stats were used to update HE info in
Radio tap header, but HE info is stored at ppdu level
stats.
So changes are done to update HE info using ppdu level
stats.
Change-Id: I4734ee5df73d3a865a8b63a9ed28d647cc52d9f2
CRs-Fixed: 3405611
This code helps to initialize and deinitialize new SOFTUMAC
based Rhine architecture.
Change-Id: I374140ccb3b31e9351c6e683c77d81a5a876472a
CRs-Fixed: 3382913
Currently dp_soc_init/deinit API's are called first for
common soc initialization/deinitialization and then architecture
level init/deinit APIs are called from base dp_soc_init/deinit.
But with RHINE architecture dp_soc_init/deinit API's are not common,
so we cannot call these APIs as base. To handle this scenario
routing all the soc level init/deinit from arch ops APIs and
arch ops APIs will take care of calling common soc_init/deinit.
Change-Id: Ibb10d452931630c917088b4d222c7fbd82621f6a
CRs-Fixed: 3404205
Trigger SAP / GO channel switch on receiving
wmi_csa_ie_received_event_id from FW in STA + SAP / GO DFS SCC
concurrency.
Change-Id: Iff60dffb71b170f56c4fbee4e297b81b87632a2a
CRs-Fixed: 3431365
Add support for WMI_CSA_IE_RECEIVED_EVENTID as:
1. Register the handler
2. Handler to extract the event
Change-Id: I9f476c7fbc51d9686d05fbdb5f46dec3bcd3c29e
CRs-Fixed: 3431363
Currently we have a 850ms timeout threshold not to
block upper APPs, but this could contribute to some
query timeout. To address this issue, this change
changes the timeout threshold from 850ms to 100ms.
Change-Id: Ibb39609000972d09713a0435b4884454b331fe4f
CRs-Fixed: 3436517
Add a flag WLAN_VDEV_FEXT2_MLO_STA_TDLS to mark whether
the vdev is used for TDLS or not.
It can use these API:
wlan_vdev_mlme_feat_ext2_cap_set(vdev, WLAN_VDEV_FEXT2_MLO_STA_TDLS);
wlan_vdev_mlme_feat_ext2_cap_clear(vdev, WLAN_VDEV_FEXT2_MLO_STA_TDLS);
tdls_vdev = mlo_get_tdls_link_vdev().
Change-Id: I89c50ad5321013993e798ebb5549c5015ac18969
CRs-Fixed: 3435963
Remove wapi frames from is_eapol check in dp_rx_null_q_desc.
This change is to address the below issue:
First wapi packet received in dp_rx_nll_q_desc,
before TID setup does not reach stack since it is
treated as an eapol frame and gets dropped in
dp_rx_eapol_deliver_to_stack.
Change-Id: Ibcad786eb1a1cec1c082ec630ea38cc582627dfa
CRs-Fixed: 3413689
Remove DP_MLO_LINK_STATS_SUPPORT macro from per
packet RX Path to enable Link Peer Stats support
Change-Id: Ie4b7ac70db3ba3a8cc20a53de320c0eb1720d08b
CRs-Fixed: 3443161
Currently for client SP, super channel list is disabled
even if the corresponding reg rules are sent by the target.
To address this issue, add two definitions for
reg_is_sp_pwr_mode_allowed_in_supchan, to check
if the given mode is SP mode in the super channel list.
Change-Id: Idb1fc22e3ba4a61a07e03302f92fd8e2a6a9bc85
CRs-Fixed: 3426498
The datarate for Data packets and QOS NULL packets,
shown in the Radiotap header was wrong for QCN9224.
In Lithium based devices, for data packets datarate
is not included in the radiotap header.
So for WKK also changes are done to not to include
data rate.
Change-Id: I3fa8a65973e3e0b01ef589551c6621d35b34b984
CRs-Fixed: 3408916
Mark the blanking support as not supported and
return success status for AR9887
in target_is_scan_blanking_enabled().
Change-Id: I055f4d3b30781189744b0d96db4a93b61c0cf1f4
CRs-Fixed: 3430100
Currently, bss is unlinked from kernel scan db in below cases,
1. Disconnect
2. Connect failure
3. AP moves to hidden SSID mode from normal mode
bss is unlinked in above 1 and 2 cases (i.e. disconnect and
connect failure) to avoid continuous connect failures when
userspace attempts connect to the same AP without issuing a
fresh scan, which may result in blacklisting the AP. But
framework/wpa_supplicant can take care of this now by making
sure that connect is attempted only if scan result is from
a fresh scan.
Unlinking the bss may lead to inconsistency in some scenarios
and found that disconnect is most common scenario. So, don't
call __wlan_cfg80211_unlink_bss_list() in case 1 and 2 to
avoid unlinking.
Change-Id: I2d3af5fcc22360a5ead0e148d623194cb815f882
CRs-Fixed: 3433127
Add APIs to fetch the DFS channel parameters such as CAC, NOL and the
channel state to the user application.
struct dfs_cacelem is defined to store all the CAC related information
such as cac start time, cac completed time and the cac timeout.
dfs_cacelems is stored for NUM_5GHZ_CHANS in the dfs pdev object.
dfs_handle_cac_events() API is used to handle CAC related events such
as WLAN_EV_CAC_COMPLETED, WLAN_EV_CAC_RESET and radar during CAC.
CRs-Fixed: 3428828
Change-Id: I82f7aafeb20222d9722bed5a1a8c10b5703ac975
Detach dp soc and mlo ctx in mlo soc down sequence,
to remove the dependency with link teardown event
Change-Id: I2dc2f64398904a7c57f579029297d11d887979c4
CRs-Fixed: 3390199
Re-init mlo global shmem region whenever in case of expected
target recovery mode. In case of mode1 recovery assert, need
complete teardown of mlo and clearing out global mlo shared
memory, when asserted SoC is recovered, re-init global shared
memory region again.
Change-Id: I475b08934bdceb78b87d115b79abf45e76633795
CRs-Fixed: 3390199
in case of DS pkts the same pkt which is received
in RX path (REO2PPE) can be refilled back to wifi
rxdma
CRs-Fixed: 3381462
Change-Id: I3762c91110ffcc95162bf068b7a1ed3e41904824
Changes to allocate correct number of buffers for monitor during boot
time and allocate remaining buffers only when monitor vap is created.
Change-Id: I8a2cd7b6a20a281934c47ca0418904b426d17a4d
CRs-Fixed: 3432525
Move smart monitor cdp func ptrs to cdp mon ops structure.
Smart monitor cdp functions are different for 1.0 and 2.0
hence moving the func ptrs to mon ops structure ensures that
func ptrs are initialized appropriately.
Change-Id: Ic827b44f36d76349f397e5b72dec0a127f90aa7a
CRs-Fixed: 3428778
Changes to incorporate link mapping size in t2lm control
field of t2lm ie per draft 3.0
CRs-Fixed: 3431897
Change-Id: I61834258e6348b6483a86eb9e9217e3d5997c2c9
1) Enable MLO Link Stats Support
2) Add Stats counter to capture Invalid Link ID
3) Fix the FW Recovery crash while ol_stats
disable.
Change-Id: I1b5263ae024579c5ec2018f8082f0d03ffdf0030
CRs-Fixed: 3431319
Received window ppdu are dropped in work queue context as it doesn't
have ppdu timestamp. Added fix to populate ppdu timestamp.
Change-Id: I3276284351f27ae2e8bfb787aa96fb031e4025ac
CRs-Fixed: 3439473
Currently, HW cookie conversion is enabled
for the WBM ring dedicated to IPA during
optional wifi datapath feature. IPA does
not need HW cookie conversion hence disable
it for this ring when the feature is enabled.
Change-Id: I84ecfa54c87f41f1be5202280c450bdfaeebd4ac
CRs-Fixed: 3437556
With the current implementation of tlv parsing for rx_evm and
rx_antenna, there is a flood in printing the higher pilot
evm count error. Update the debug level of the print to
prevent the RCU stall due to excessive printing.
CRs-Fixed: 3435849
Change-Id: I8f1eb0c133a4d8b70494639d90b04de23b276fc2
To support MLO on 4 chips, update the maximum number of chips that
can participate in MLO to 4
CRs-Fixed: 3426681
Change-Id: I1281eed9720d5a5f17bbb6a5e3c7f9e56842a33f
As IPV6 version number 0xdd86 is 16 bit integer
change the type from uint8_t to uint16_t.
Change-Id: I82c2c0c5bac0632351ee41873b4dd83b2eeae8be
CRs-Fixed: 3429726
Limit the AP-MLD association links to 3 currently.
More than 3 links will not be supported currently
for association.
Change-Id: I3cd6acda27d2f538172673a8d573367d77ee00b5
CRs-Fixed: 3435787
Currently pipes_down flag is not set to false
during wlan_ipa_uc_enable_pipes() because
autonomy is disabled for optional wifi dp
feature. This causes a crash while trying
to disable pipes during teardown.
This change will update the check and
set pipes_down flag to false during pipe enable.
Change-Id: I41f7e6fc942764c5ab5d3437185af9f90fb39280
CRs-Fixed: 3436012
Read the new service capability:
WMI_SERVICE_TDLS_CONCURRENCY_SUPPORT for TDLS concurrencies
support. With this service capability below concurrencies are
supported:
STA+TDLS+P2P
STA+TDLS+P2P+P2P
STA+TDLS+P2P+SAP
Host driver will check this capability to disable TDLS
off channel when concurrent interface comes up. If this
service cap is not advertised by the firmware then
existing TDLS connection will be teared down when concurrent
interface is started.
Change-Id: I744775080a22ca8f3bc88894c349916eea27fd3a
CRs-Fixed: 3414266
Refactor DP rings related code to different files, such that
both hardware UMAC based and Software UMAC based platforms
can use required code effectively.
Change-Id: Ie58eae34a2da77c2d63870fab74b9d2d9d49c14a
CRs-Fixed: 3382905
