Fix intraBSS MCAST traffic issue between legacy and MLO
clients. Fix includes below changes
1. Change get_mcast_primary_vdev to return correct value
in case current VDEV is mcast primary
2. Avoid checking vdev->mlo_dev as it is set only for
mcast primary VDEV
3. In intraBSS ucast case use destination SOC to get the
destination peer with da_peer_id
Change-Id: I0d7a890bc62f703cd92e7c9edc20768a9a487d06
CRs-Fixed: 3456458
In WBM2SW Rx Error path for BE
specific functionality
1) HAL API's/Function pointers are replaced
with specific function calls.
2) Efficient read/write of WBM Error Info
from HAL Rx desc.
3) Minimize reading data from Nbuf TLV.
Change-Id: Ic8793ffcbeb2411c9b81fb32acae062e8a1f40cc
CRs-Fixed: 3362828
done the following changes to improve the RX path KPI
1. remove the extra invalidate in RX path as
we no longer dirty the RX TLV cache lines.
we now store the rx error codes in nbuf cb instead
of RX TLVs reserved memory bytes.
2. with features like flow tag and wds extended mode
enabled by default, the rx_fast_flag is always set
to false, this resulted in lot more instructions
being executed in RX path.
Now we ensured this flag is at least set for other
features which are not enabled by default.
Change-Id: I04c6bdc52a2b3f1248b822a108d8bd1a70abcc7c
CRs-Fixed: 3406505
Remove wapi frames from is_eapol check in dp_rx_null_q_desc.
This change is to address the below issue:
First wapi packet received in dp_rx_nll_q_desc,
before TID setup does not reach stack since it is
treated as an eapol frame and gets dropped in
dp_rx_eapol_deliver_to_stack.
Change-Id: Ibcad786eb1a1cec1c082ec630ea38cc582627dfa
CRs-Fixed: 3413689
Remove DP_MLO_LINK_STATS_SUPPORT macro from per
packet RX Path to enable Link Peer Stats support
Change-Id: Ie4b7ac70db3ba3a8cc20a53de320c0eb1720d08b
CRs-Fixed: 3443161
1) Enable MLO Link Stats Support
2) Add Stats counter to capture Invalid Link ID
3) Fix the FW Recovery crash while ol_stats
disable.
Change-Id: I1b5263ae024579c5ec2018f8082f0d03ffdf0030
CRs-Fixed: 3431319
Add link_id check while aggregatin stats into vdev at
time of peer unmap, otherwise vdev stats are aggregated
twice and hence give incorrect output.
Also comment out link_id fetch in BE Rx path as it is
currently not enabled.
Change-Id: I91ceab4c6380bbd6e0cb2717adb2413e9e8e4221
CRs-Fixed: 3435688
Add support to enable/disable MLO Link Peer stats through
ini and cfg80211tool enable_ol stats command
Change-Id: Id1229a149befa416d060e1b07eee150e6b295abf
CRs-Fixed: 3397721
Add support of HW Link ID in PeerMetaData.
Retrieve the HW Link ID in both Rx per packet
path and RX Error path, store it in nbuf cb.
Use the stored value from nbuf while updating
MLO peer link statistics.
Change-Id: I11596d44fe8557af568fd399d0c0a04d2b887b2a
CRs-Fixed: 3397721
In RX process, driver reaps the data in the REO DST RING
by successively move the tail pointer. The problem is
that driver will move the tail pointer twice if something
wrong happens, like sanity check, which will lead to the
miss of an entry next to the abnormal entry. This issue
has existed for a long time due to the code refactoring.
Change-Id: I2c5d402f81090497a4414efbf6e7e79130ba11f5
CRs-Fixed: 3426707
For WDS ext use fr_ds and to_ds fields to check for
4-addr instead of reading value from TLV
Change-Id: I261746018de2320367e8650332a5c355edfb1489
CRs-Fixed: 3410639
WIN and MCC shared a common definition od qdf_nbuf_cb
considering that there are various fields which are
not common it is decided to have 2 different definitions
for WIN and MCC. in case of WIN he per pkt cycles will
be significantly reduced in RX path.
CRs-Fixed: 3257879
Change-Id: I5d3fa7c91592afb905702f2dca49972be89664e3
The kernel-doc script identified a large number of documentation
issues in dp/wifi3.0/be, so fix those issues. In addition, there are a
number of instances where public functions have their implementation
documented instead of having their interface documented, so move that
documentation.
Change-Id: I15c8570aa1832ed053fa38f536fa36b2ca0aa56b
CRs-Fixed: 3373157
In case of split phy return the partner vdev from
same SOC for intrabss forward
Change-Id: Id7d2acd80d60e4d5cfb6df821f72a8d885d8fe57
CRs-Fixed: 3398627
1) In WBM2SW Rx Error path, code to reap and
the process the HAL descriptor is split into
BE and LI architecture specific functionality
in dp_be_rx and dp_li_rx files respectively.
2) The function to handle Null Queue desc.
error for WBM and REO Rx Error path is split
into BE and LI architecture specific
functionality in dp_be_rx and dp_li_rx files
respectively.
Change-Id: Ic51a9742f65cee677ed7f3081f49fb3ece5b42f1
CRs-Fixed: 3356179
Change flow idx invalid to flow_idx_valid.
This change is made so that flows for which this field is not present
are identified as invalid flows and not forwarded to PPE.
Change-Id: I92c82bb0ef57012b2b884fe3fd18344b523a3f51
CRs-Fixed: 3390588
Generate the mcast dummy src mac from the SA
instead of the AP mld mac address.
Change-Id: I146deb8564bd18b33ca87c2bd62121616e149850
CRs-Fixed: 3390036
flow related fields like flow_idx_invalid and
flow_idx_timeout are needed to send the packet
to PPE_VP hence need to be saved in SKB CB
CRs-Fixed: 3359237
Change-Id: I2166566c53641f6569f69ff316d1bafb67a828d0
Use destination chip and pmac IDs from TLV.
Build flag for HW assist feature is not enabled yet,
so code is not exercised.
Change-Id: Ia9175d6597a7a2780f451d99a9f8ece7a16049e5
CRs-Fixed: 3262344
Due to the CCE rule in QCN9224 IGMP packets will be routed
to err ring. When multipass is enabled, perform multipass processing
before handing over the packet to stack.
Change-Id: I50b747710eb3c49eab60c81bbc61e75e2f8650ed
CRs-Fixed: 3275888
Adding compact tlv support for QCN9224, As part of this change
Rx tlv size will reduce from 384 bytes to 128 bytes.
Change-Id: I3f42a781e42b2e696a5b25d9c5f333c8cc83b7fe
CRs-Fixed: 3274152
Tid in RX frame header may be larger than MAX TID allowed
value, this will lead a out of boundary array access and
lead to kernel crash at last. Change is aimed to do a TID
check and discard such frame when necessary.
Change-Id: I11f312668a5a42d690c058550f22b0f36f952104
CRs-Fixed: 3264581
Change to avoid processing of extended features
based of Fast RX flag
Also add changes to enable or disable this flag
based on feature settings
Change-Id: I8064780a271f8bdcf396bb9e2e2c14998f195535
CRs-Fixed: 3268842
Access peer, vdev only if peer_id in current pkt is
different from previous pkt.
CRs-Fixed: 3257844
Change-Id: If10356a01030511c7473112f67f3434d328d4586
Add HW, SW and nbuf prefetch support in Berryllium, this will
ensure we have prefetched the HW desc, SW desc and nbuf by
the time we are in the 3rd iteration of the dp_rx_be_process
first loop.
CRs-Fixed: 3218647
Change-Id: I27d371c5d1c9a37d61e4fc00d5eb03609fad589c
Currently while sending nbuf to rx fate logs
we are not removing rx tlv before sending nbuf
to logger which is causing issue of incorrect
packet type issue.
To Fix issue make changes to make sure that
rx tlv is removed and nbuf length is set
Change-Id: Ib56c8e009398b3410c43be910feb4048bfb06b54
CRs-Fixed: 3241828
Duplicate X times of RX packet before delivering to stack, if OTA
RX T-put is 100 Mbps and try to simulate 200 Mbps RX T-put,
duplicate extra 1 time RX packets, this is aimed to test
driver/stack RX capability.
Change-Id: Iaf4db05d0ec0e0cda5fac19fa63b9d3133270847
CRs-Fixed: 3132743
Add support to track the high watermark for the number
of entries which are used at any given instant. This helps
in identifying if the ring size is sufficient or is being
full for certain use-cases.
Change-Id: Id3ffa52c653696699fbcfbb556a815d5f7908863
CRs-Fixed: 3235115
Add packet logging support by registering
Rx and Tx callback functions for packet logging of
initial 32 Tx and Rx packets.
Change-Id: I91b59b7c5f65f505e3ee730c497347be28955128
CRs-Fixed: 3224881
In the case of qwrap repeater, send the original packet on the
interface where it received and send the packet with dummy src
on the mcast primary interface
Change-Id: I08f64559ff2a9430b140c962117d4d71ab684b8d
CRs-Fixed: 3214360
With restructuring in HIF runtime PM module, modules are
required to register with the HIF runtime PM module. Also,
changes are done in functions of allowing and preventing
runtime PM suspend as part of restructuring.
This change registers DP, HTC and HAL internal modules
with runtime PM module and update HIF runtime PM function
calls with the restructured code of HIF runtime PM module.
Change-Id: I8899a1d3b92a90a05c5eaf4df7609f4008f739f8
CRs-Fixed: 3169372
