Extract EML and MLD Capabilities from Target via
wmi_service_ready_ext2_event. These values can be
used while advertising EML and MLD Capabilities.
Add helper function to get EML related delays in
Micro Secs from values got from EML and MLD advertisments.
Send EML Capabilities received from node to Target
via WMI_PEER_ASSOC.
CRs-Fixed: 3225495
Change-Id: Ibfa2ff8dbf11d4293125331376a7986e611d5f63
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the target SW to
indicate the different capabilities of the Spectral HW.
Add support to process this event and extract the capabilities.
Change-Id: I03b3236b6def98d24e77b2a9ea51ee866e62e6fe
CRs-Fixed: 3238450
Firmware advertises WMI_SERVICE_DELETE_ALL_PEER_SUPPORT
capability to indicate vdev peer delete all command support.
PASN peer relies on the WMI_VDEV_DELETE_ALL_PEER_CMDID
command to delete the PASN peers before vdev delete.
So allow PASN peer create only on targets that advertise
WMI_SERVICE_DELETE_ALL_PEER_SUPPORT.
Change-Id: Ib94d9e14e34dd1e5c25bf6946e0d59fe83fd6dd3
CRs-Fixed: 3229438
Add infra to support Dedicated Bluetooth Antenna Mode (DBAM)
feature. It is used to switch between dedicated antenna for
BT and shared antenna for WLAN and BT.
Change-Id: I21688093674ef9b63ee811df9168a31bd71c56b5
CRs-Fixed: 3239895
Add support for initiate pasn authentication using the vendor
command: QCA_NL80211_VENDOR_SUBCMD_PASN
Fill the below required attributes to initiate PASN:
QCA_WLAN_VENDOR_ATTR_PASN_ACTION
QCA_WLAN_VENDOR_ATTR_PASN_PEERS
QCA_WLAN_VENDOR_ATTR_PASN_PEER_MAC_ADDR
QCA_WLAN_VENDOR_ATTR_PASN_PEER_SRC_ADDR
Change-Id: If33f54eafe5986b4571cc21a80fb0b61578db116
CRs-Fixed: 3232261
Fix TWT configuration for 2.4 GHz PHYB mode MAC.
Change is macro protected. Wlan resource config sets twt_ap_pdev_count
to number of Radios per psoc. But for 2.4 GHz vap coming up in PHYB
mode needs the value 2 if only one radio is enabled per psoc. WAR is
done from host driver to enabled TWT certification process. Actual fix
must be done from Firmware code.
Change-Id: Id29692097ee555c94c54f53d7540eb108fbe98e0
CRs-Fixed: 3238210
Add change to fetch and save the WMI service capability
bit of FW to support vendor handoff control feature
using service bit.
Change-Id: I6bc85f2807032bf84d391f34c814c91de906ab42
CRs-Fixed: 3225147
Since more than one components depend on reap timer of
monitor status ring, add bitmap to record the trigger
sources of the timer and refine the APIs/calling functions
accordingly.
With this change:
When a new start request comes, if the source is
CDP_MON_REAP_SOURCE_ANY, skip bit set, and start timer
if any bit has been set in the bitmap; while for the
other sources, set the bit and start timer if the bitmap
is empty before that.
When a new stop request comes, if the source is
CDP_MON_REAP_SOURCE_ANY, skip bit clear, and stop timer
if any bit has been set in the bitmap; while for the
other sources, clear the bit and stop timer if the bitmap
is empty after that.
Change-Id: Idaa7837c4b93b247ff2236aa5072d309fa9548c2
CRs-Fixed: 3190347
This enables the option to configure when a peer's
TID queue needs to be flushed. This is required to
discard packets that are no longer useful to the application.
Change-Id: I558debff043fc0c8038e5f5f2c815b64c90e1561
CRs-Fixed: 3130422
chan_params structure is uninitialized, due to which variables
inside the chan_params structure have garbage values.
To avoid this, initialize the chan_params structure.
Change-Id: Ic09c0a2d24c2a1eac8f076c7bbd4d25d147370fd
CRs-Fixed: 3205502
For legacy targets, MLO-specific event-handlers are not
supported.As this is not fatal, the caller of the
wmi_event_handler_register API should not treat this as
failure.
Change-Id: Ic6a36c933b46cfcbe860f573af290cac4667de44
CRs-Fixed: 3181774
Set/Get the management Rx REO feature capability to psoc
using the correct APIs.
CRs-Fixed: 3201829
Change-Id: Id925be4a6930a1a3ec05bfdd67ef6518a5cb2cea
In function reg_freq_width_to_chan_op_class_auto, global_tbl_lookup is set
to false for 2.4 GHz and 5 GHz without considering the global opclass set
by user command. This results in wrong opclass information in eCSA.
Add an api to check if global opclass is set and update global_tbl_lookup
accordingly in reg_freq_width_to_chan_op_class_auto.
Change-Id: I069131d6068fb546f2b59f1e752a3c8c50f15759
CRs-Fixed: 3168817
Set num_max_active_vdevs to WMI init command and
extract it from WMI ready event.
Change-Id: I6d6377c03214fcab74c675839f136301ebf27834
CRs-Fixed: 3183010
Add init sequence handling to support AFC device deployment type
Set AFC device deployment type to regulatory private obj
Change-Id: Ib041d2010552412aaaa41395915d948aa2ea2bba
CRs-Fixed: 3190288
Add support to manage Wifi pos vdev private object. Add new peer
type in enum wlan_peer_type. Add rx_ops and register the rx_ops
for PASN peer create/peer delete request.
Register 11az PASN related WMI events in target if.
Change-Id: I2a5e4d8d7c9b9562d9ab02b287957e93ee6f4758
CRs-Fixed: 3154521
Read the management Rx reorder snapshots back to back to get a
consistent value.
CRs-Fixed: 3181479
Change-Id: I5ff73db5d4be362d7449494f3630a11da0456f0e
Currently host driver defines 11d offload APIs under
HOST_11D_SCAN feature flag which is not correct.
Add 11d offload APIs under TARGET_11D_SCAN feature flag.
Change-Id: I0d3205b215c9fc363a71c4e7a6b54e40fb10a964
CRs-Fixed: 3183200
When we try to unregister a module that was not registered earlier, we will
try to unmap the buffers that were not allocated. As a result, we end up
with invalid memory access. Fix this issue by checking if the module was
registered before unregistering it.
Change-Id: I97c4ee7a6690c6cba2a7d1a919a39fcb12ebb692
CRs-Fixed: 3179498
Add change to fetch and save the WMI service capability
bit of FW to support multi-client low latency feature
using service bit.
Change-Id: Ifce82c06fc913668949ed06634da1eebcea80397
CRs-Fixed: 3180932
While pushing WMI cmds for TWT enable/disable, use separate
CE instance for each pdev.
Change-Id: I63e77996f9face7e319fbd8abf580d13ce1c05a1
CRs-Fixed: 3162042
Firmware advertises per candidate roam frame capability to
indicate:
1. Firmware sends auth/assoc frames for each candidate to
which roaming was attempted.
2. Fill the frame info TLV with authentication algo = 3
for authentication frames.
Add support for the roam per candidate frame info capability
Change-Id: I95c23031ab0fbc21fb9d8db3bd54004e4d1ac234
CRs-Fixed: 3172311
packmode_fftbin_size_adj is used when the reported FFT bin length from
HW is twice the actual size. This issue is fixed in HW from Pine onwards.
So, don't use this WAR on QCA9574.
Change-Id: I43a4bcb6f238fac6a14c1f6459d7ad24a7a99b2d
CRs-Fixed: 3165085
Update cfr metadata version for Alder as agc gain table index
is reported newly on this target
Change-Id: Ie9b4933068163d461676a9005ba8c706730717e8
CRs-Fixed: 3170137
1. Since peer id is reused for reconnection in MLO case,
old entries for queue desc addr is cleared. Clear the reo
internal storage and reset it back on client connection.
2. Send Qref feature WMI cmd to FW to enable the feature.
Change-Id: I6705ce121c8c25d9a2ace039dab21312fa5ea4b1
CRs-Fixed: 3156642
Puncture is one of 11be feature. Even 11be compile macro is defined,
Dut can start AP with non-11be mode. Regulatory component has no idea
whether it should consider puncture or not. Puncture should be a
configurable parameter from caller.
When updating channel state, puncture should be considered for 11BE
AP. is_create_punc_bitmap should be set in struct ch_params and pass
it to reg_get_5g_bonded_channel_state_for_pwrmode.
Change-Id: I96fb131f2df201a827ab7d98ca099a38b008e0d3
CRs-Fixed: 3160259
Validate the MLO HW link related info obtained from the global shared
memory arena of management Rx reorder feature.
CRs-Fixed: 3111549
Change-Id: I6fd7812dc49bfa8428b2ffbf66ae978592734bc0
When non-TLV targets are used, the WMI event table is not populated.
So, it shouldn't be treated as fatal and WMI event register/unregister
functions can return NOSUPPORT instead of FAILURE.
Handle this value in TWT code.
Change-Id: I5bc8e7aae2e572c84ea0333c967cff527d5cbcc3
CRs-Fixed: 3145077
Update cfr metadata version for Pine and HKv2 as agc gain
table index is reported newly on these targets.
CRs-Fixed: 3158325
Change-Id: I17fe5a78ec44e1528e6187535a803c729734dd18
Include a UTC timestamp when constructing the CFR header,
represented as a 64-bit nanoseconds value. This will allow
for better correlation with ground truth data.
CRs-Fixed: 3156846
Change-Id: Ic5308bcd591d641e715ded8e4b75d447160dbbce
