QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO to get finer details on roaming
behavior, TSF out of sync count, and the latest TX rate, Rate Index used
for the transmission.
Change-Id: I34d112a263a587603f555069c0244f61dc44ec73
CRs-Fixed: 2876411
Currently there is no mechanism in driver to decide whether
to consider the user configured number of sched scan plan or
to configure only 1 schad scan plan.
There is a requirement to configure only one sched scan plan,
add ini support to meet this requiremet.
Change-Id: Iea3bc3f18696837150ce6f4bd60416a8a45bd1d3
CRs-Fixed: 2868125
Currently driver rejects connect request if assoc ie length
is 0 or assoc ie is NULL which results in connect failure.
To avoid above issue do not reject connect request if
assoc ie is NULL. Also fix the connect status to send the
proper status code instead of WLAN_STATUS_UNSPECIFIED_FAILURE.
Change-Id: Icb775a88780350fa589ae8db65abdd79980558c6
CRs-Fixed: 2869967
Host updates proper FILS param set i.e. username, auth_type and
is_fils_connection in the FILS response.
Change-Id: I0c30325bc7d620aa286aae0dd299dec9b26219ff
CRs-Fixed: 2865060
In connection success case the unlink BSS is not required, so
add the status check.
Change-Id: If5e2d02b37865267a096f01f0835bdccbc8e1c3d
CRs-Fixed: 2860102
Define VENDOR_NLA_POLICY_IPVXXX_ADDR for IPV4/IPV6 to address kernel
version dependency.
Change-Id: If73fe24dc29a65c043af6cf3d797a756a264f602
CRs-Fixed: 2851486
Host add support to save gtk and set hlp data from fils ie of connect
response.
Change-Id: I5e6b9882359697f09a0935a9c07f3427dbe04cc2
CRs-Fixed: 2849123
Use safe API - wlan_objmgr_iterate_obj_list to enumerate
vdev. It will check vdev in "create" state by
wlan_objmgr_vdev_try_get_ref.
Change-Id: I650801c07846e22f1863925ed4316c0a24bd9cae
CRs-Fixed: 2849177
The response for the respective TWT operations can either be synchronous
or asynchronous (wherever specified). If synchronous, the response to
this operation is obtained in the corresponding vendor command reply to
the user space. For asynchronous case, the response is obtained as an
event with the same operation type.
Drivers shall support either of these modes but not both simultaneously.
The support for asynchronous mode is advertised through the new flag
QCA_WLAN_VENDOR_FEATURE_TWT_ASYNC_SUPPORT. If the driver does not
include this flag, it shall support synchronous mode.
Change-Id: I359e12c5147b0115158d03a7a08d74beca78455c
CRs-Fixed: 2842872
Define the following additional TWT operations:
QCA_WLAN_TWT_GET_STATS, QCA_WLAN_TWT_CLEAR_STATS,
QCA_WLAN_TWT_GET_CAPABILITIES, QCA_WLAN_TWT_SETUP_READY_NOTIFY.
Also define new attributes to qca_wlan_vendor_attr_twt_setup
and qca_wlan_vendor_attr_twt_nudge.
Change-Id: I687fd215c13aa12741d8ba7af23507f930d0ec81
CRs-Fixed: 2842072
In dual station case, wlan0 is connected to AP, wlan1
connects to the same ap and will get failed because two
interfaces can not connect to same band (same ap).
At present wlan1 will do unlink bss of ap after connect fail.
This may corrupt the bss tree in kernel because the bss is
still pointed by wlan0’s wdev -> current_bss.
Fix by avoid the unlink bss if the bss is still connected
in any interfaces.
Change-Id: I27c76eca2d4f130addabbdc2600f6959d24c8511
CRs-Fixed: 2837496
TWT nudge is a combination of suspend and resume in a single request.
Add TWT nudge operation and QCA vendor attributes to support
the TWT nudge request.
Change-Id: Iddc4cb6722e88ad9dd65933091bdaa468718f2cf
CRs-fixed: 2822267
Define QCA vendor attributes to dynamically configure TX NSS and RX NSS
to be used with QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION and
QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION commands.
Change-Id: I9b3b3d3c5be2abd01fa8669b10c2961c271ecdbb
CRs-Fixed: 2831257
Add feature capability indication for dbs for the
drivers to advertize support for this.
Change-Id: Ic6941e58a30d6aa6a867a12ddd7a8db5abbb1673
CRs-Fixed: 2821654
Add feature capability indication for Adaptive 11r for the
drivers to advertize support for this.
Change-Id: I28da5c3d7d4d841de980c841b1d4c39be12ed295
CRs-Fixed: 2817358
Define a QCA vendor attribute
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_FULL_BW_UL_MU_MIMO to
enable/disable full bandwidth UL MU-MIMO subfield in the HE PHY
capabilities information field for testing purposes.
Change-Id: I666abb2654603069140bd603ae0377ea01a720fa
CRs-Fixed: 2816951
Add logic to
- Check if connect req freq is 6Ghz and security
is not allowed for 6Ghz, reject connect.
- Ignore 6Ghz APs if connect req security is invalid
for 6Ghz
Also added user config key_mgmt_mask_6ghz mask
to allow specific AKMs, by default all are allowed.
Add added user config check_6Ghz_security to enable
security checks as per spec.
Change-Id: I37518731faa4de67a49853e5ac544efa3b3ce1d6
CRs-Fixed: 2813013
There is a possibility that driver already has a vdev
with the mac address same as bssid, in this case sta
should not connect to this AP as it may lead to undefined
behavior.
To address above issue add a check to compare bssid with
already existing vdevs before connect start.
Along with above changes add few renaming changes also.
Change-Id: Ia12be0b392a01bf935b5261e505290064de68805
CRs-Fixed: 2809147
Move disconnect wait logic from osif to connection mgr, so that
MLO/IF manager can use the wait logic for disconnect
during vdev delete.
Change-Id: Ied2bbcfd6a532209f8008499424f94acc41efc0e
CRs-Fixed: 2800990
The connection process fails for several reasons and the status codes
defined in IEEE802.11 specification doesn't cover the locally generated
reason codes. Add an attribute to QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO
vendor sub command which can be used by driver/firmware to report various
additional reason codes for connection failures.
Change-Id: Ibab4696fba34f7a18fb8b5f8601e90c5dfcba89e
CRs-Fixed: 2799153
Currently host does not convert all internal auth types
to qca auth types which results in invalid auth type
indication for big data logging even for some of the
valid auth types.
For example in current scenario connection hapens in SAE
auth type but driver indicates invalid AKM type.
To address above issue add missing auth type and send
proper auth type to user space as part of the big data
logging.
Change-Id: I2612a081385c2bc888afb032cf6fd2a44d886e40
CRs-Fixed: 2803348
Unlink BSS on connect timeouts like AUTH/JOIN/ASSOC timeout and
in case of no candidate found. This is to avoid reconnect without
a scan.
Also remove entry if diconnect from peer or south bound disconnect
due to heartbeat failure, sta kickout etc.
Change-Id: Ie78c7e764e8c009a5d19ed5dda9c6b9bbf75196f
CRs-Fixed: 2798188
Initialize osif callbacks to connection manager and add
legacy callbacks to osif and initialize these legacy callbacks
for connection manager.
Change-Id: Ic3e8bd6f55b6cdbbc8cdd5c9c3a6631e8d3bd83e
CRs-Fixed: 2797472
Add new QCA vendor attributes to get thermal level from driver.
Driver will return thermal level upon userspace requests or sent
thermal event when firmware indicates theraml level changes.
Change-Id: I86b3ac34466d57cbd713cf72a7eb883677883a21
CRs-Fixed: 2786642
Wake lock stats vendor command attribute names in
the driver are different from the attribute names
in upstream qca-vendor.h.
Change the wake lock stats attributes name in driver.
Change-Id: I761aa07dacd6a7424759ae1e501053428275b113
CRs-Fixed: 2789538
Add connect params in osif connect request to pass scan IE and other
params from legacy to be used in connect request.
Change-Id: I83721023362ff2405727316f090671468200b362
CRs-Fixed: 2793280
Define QCA vendor attribute in SET(GET)_WIFI_CONFIGURATION to
dynamically configure ANI level.
Change-Id: I422c6301f2e4c207b58a2d85199dd4a47f031236
CRs-Fixed: 2781047
Introduce QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME_TRIGGERS
that represents the triggers for which the scan scheme from
enum qca_roam_scan_scheme has to be applied.
Change-Id: I9d620a0ada16093042befaf8ae2e80437369c256
CRs-Fixed: 2785260
