To avoid memory leakage, clean children and firmware lists
at session close, error cases, and at the end of each usage.
Change-Id: I1eadbf81da207bd987c50428c0c7cf4967a8885f
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
[1] Add support to adjust and set blur type and blur
resolution.
[2] Modify flip to not allow dynamic flip enablement
when external blur is enabled.
Change-Id: I730f452c143ba8c8e15402d1c1ec3a0617bd583c
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Modify cap values for below properties:
[1] VBV Dealy: default as 300, min as 100, and max as 300
[2] Peak bitrate: default as avg bitrate set by client.
Change-Id: Ic9533e8a40e789128e5baa975bf1a0355e373e08
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Add support to calculate and print encode and decode
time, and average time consumption per fbd sample.
Change-Id: I5e867833d1d88285bfebc8c9b9a593e3ed975ed5
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Increase max buffer count to release the buffers,
Change-Id: I34774a8e99c7a5c78f79e8ca101e6135a22e7f30
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Due to delayed unmap feature on decoder output buffers,
refcount will become one when no one uses the buffer
in driver. In release done functonality, remove the
buffer from maps list only if refcount equal to one.
If refcount is more than one indicates the buffer is
being used, so do not remove from maps list. There are
chances that same decoder output buffer might be queued
by the client in which case we are not supposed to
unmap it from maps list in release done.
Change-Id: I69250c3efa89d77055e89770fd441af1fb50b755
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
add extra size for input meta buffer
when ROI metadata is enabled.
add dependency of rate control and
color format.
Change-Id: Icefd3f9e319d596f88090cee331417c0b2946180
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
- subscribe for dpb list property in combined
mode on output port.
- copy dpb list property payload from fw to
static array.
- using this array, mark read_only list buffers
as non-reference if not part of array. if count
of such buffers is greater than output min count,
send to fw for release.
- once fw returns them, destroy these buffers.
- unmap stale output mappings due to lazy unmap feature.
- unify release internal functions into common function.
Change-Id: Id32f04efb19eecaff453cc4383ee8296a0246263
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Need to increase debug timeout incase more debug logs were
enabled. This is to avoid sync cmd timeout.
module_param_cb supports to register custom set/get callbacks.
So using this feature to increase various timeout values,
incase more logs were enabled.
Change-Id: I194c077c2ba00af2403d487a3dcfbb48f119b478
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Avoid adjusting, sanitizing, and setting mark and use ltr
controls to fw for input port static case.
Change-Id: I8ac7fd9537ff0c5ddce0ff0f4d0337cb19dd83d2
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Added support for VIDIOC_ENUM_FRAMEINTERVALS to provide
supported frame intervals range for a given resolution.
Change-Id: I51174634739dd1141d308ba9bfd1cf3720b6ca42
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
- Account for V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY
ctrl value to decide HFI_PROP_DECODE_ORDER_OUTPUT property value.
- Set encoder run time properties on raw port
- Some logging changes.
Change-Id: I5eef81b484e81b69031854a3a8665de4be7f98f9
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Handled below items as part of this change.
- print buffer_name instead of hex value.
- enable dcvs only for realtime sessions.
- enhanced max_input_data_size handling at
msm_vidc_scale_power.
Change-Id: If5ac810f4e020bee54364161596c5547af94161a
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
- add support to skip lazy unmapping for decoder
output buffers only. Map twice for these buffers.
- v4l2 client owned RO SMMU mapped buffers are
maintained separately in read_only list.
- For FBD with RO flag from fw, add buffer to read_only
list. Else remove from this list.
- During FTB, if buffer present in read_only list,
add RO flag to hfi buffer and queue to fw.
- During streamoff output, unmap all buffers except
those present in read_only list.
- During close, unmap completely and clean up read_only
list, output list.
Change-Id: Iacee7d298dfbff0b9cb6f17dff27ad98574b489b
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Add support to deliver HFI_PROP_BUFFER_TAG via FTB metadata buffer
to receive HFI_PROP_DPB_TAG_LIST from fw via FBD metadata buffer.
Change-Id: Id9eeee26135379975f55923505d9c91905fa0b9e
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Do not access buffers list of an instance without
acquiring its instance lock in msm_vidc_set_clocks()
and msm_vidc_set_buses().
Change-Id: Ic7e8e15eaddca3b77bd4eccc6b728de20d3bcc78
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Introduce module_param to enable debug logs.
For general debug, use below commad:
echo 0x103f101f > /sys/module/msm_video/parameters/msm_vidc_debug
To further print bus-related logs, use below command:
echo 0x103f103f > /sys/module/msm_video/parameters/msm_vidc_debug
Change-Id: Iab735d3e7157cd78a8e5d99c4cdbb290fb36421a
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Following changes are added with this:
1. Handle and adjust session priority.
2. Session addmission based on priority.
3. Power (clock and bus) scaling based on priority.
4. Handle s_parm influence on priority.
Change-Id: I12dec5fb03d733f07b0b0a24b4d74d1ccd4bf791
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Remove separate fault_work_handler and print all needed
debug info as part of smmu_fault_handler callback itself,
to avoid race between fault handler invocation and core
deinit sequence.
Change-Id: Ib47e3d457a5a3e33497c71d5920382cb43baed79
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
remove release of dpb buffers as part of start
of output port.
handle watchdog interrupt incase of page fault
Change-Id: Idaccbcaa92d4835dea2da3d8b6f645114baa338a
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Enable encoder input Compression Ratio (CR) stats.
Input CR stats are provided by clients for each input buffer
and used in bandwidth calculations.
Change-Id: Ibd910118837148b0b9dcc288069237f9a2d8f225
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
add RGBA and RGBA_UBWC color format support
for encoder.
Change-Id: I3e179ae9769d851afc5a6f11e1afb14d96e92073
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Initialize subscribe params for colorspace using OUTPUT
port params and use right mapper function
Change-Id: Ie6be50c1de20e351bad0fc4b015bcc4d72d1711b
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
- Add support for a new non-secure pix context bank.
- Remove usage of deprecated 'buffer-types' in context banks.
Change-Id: I3a21eb8ce1d9aff277568d54aadb54193ad0ce75
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
update hfi command header file to include
release done flag and related hfi buffer flag
changes. add functionality to release and
unmap buffer if this flag is sent by fw.
Change-Id: I03fdd7776fcd6ac5e8a147c7dff2dfb6a15250e9
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
