Process smart antenna fields from tlv
HTT_PPDU_STATS_USR_COMPLTN_COMMON_TLV in tx
completion path and export it to tx_completion.
Change-Id: If14e711b0aee8e583fd329f3c3915904649ffe47
CRs-Fixed: 2491429
This feature enables user to change HW mode dynamically
from DBS to DBS_SBS mode and vice-versa. Currently, HW
mode configuration is only possible through INI setting
requiring a subsequent reboot.
Relevant DP changes are:
1. Add API cdp_txrx_handle_pdev_status_change to pass
pdev 'up' or 'down' status to DP module
2. Add pdev-status check in dp_rx_process_invalid_peer
3. Add pdev-status check in dp_tx_comp_handler to free
buffer and release descriptor
Change-Id: I74b144abb1b0dc41a26a18ad28f872e6457e9653
CRs-fixed: 2490212
Size of rx_pkt_hdr tlv structure is used to check if there is enough
space in the SKB to add radiotap header.
The issue is seen due to a single SKB can hold the multiple TLVs and
the next subsequent SKB has the data. In this case, there is no headroom
available in the second SKB. Therefore crash seen while adding the
radiotap header in the second SKB.
To fix this issue, check if the SKB has enough headroom space. If not,
drop the frame.
Change-Id: Icd11f946c0aee974dde2ef21f59cfe3d8b87fa5d
CRs-Fixed: 2480719
A radio level parameter for configuring if external channel selection on
the radio is in progress is required to reduce the number of external
channel selection requests by the radio.
Add the parameter OL_ATH_EXT_ACS_REQUEST_IN_PROGRESS for this purpose.
Change-Id: I30ce066e840b11fe23158b896977fbf3924dbbf3
CRs-Fixed: 2483737
Add enum for baseline radio level channel width. This is required for
some low level use cases which need the original width configured into
the radio when channel is configured, rather than per-VDEV protocol
level width which might vary.
Change-Id: I8215003774bc46403a038011e7581517d25b94f9
CRs-Fixed: 2474794
Add enum pdev configuration param to
- Set PD threshold value
- Set enable/disable PD transmission
Change-Id: I76209a316552b63f72df9a812a5491517b7f1277
CRs-Fixed: 2429269
Non raw traffic gets enqueued to VAP in raw mode
and incorrect fc.type causes HW fault.
Lets proceed only if raw frame is of type data.
Change-Id: I9f0d608cd1b319feb9af642969b258aab813645f
CRs-Fixed: 2434391
Add WMI commands:
1) WMI_PDEV_PARAM_SET_MGMT_TTL
Enable/Disable/Set MGMT_TTL in milliseconds.
2) WMI_PDEV_PARAM_SET_PROBE_RESP_TTL
Enable/Disable/Set PROBE_RESP_TTL in milliseconds.
3) WMI_PDEV_PARAM_SET_MU_PPDU_DURATION
Set global MU PPDU duration for DL (usec units)
4) WMI_PDEV_PARAM_SET_TBTT_CTRL.
Set TBTT CTRL value BITS 0 - 2
(refer to WMI_TBTT_CTRL_CFG enum)
Change-Id: Iedda500fdb7bdedcc11fef31f0b29ad3f1812a43
CRs-Fixed: 2415745
Tx completion stats should be counted per wbm ring on tx completion
and not globally. Similarly, rx stats should be counter per reo ring.
Change-Id: I1e4af0d38b23e60de78ca03316861db08ff0811a
Add configuration option for enabling/disabling acs channel
grade algo along with configurations channel efficieny
variance and weightages for near mid and far range OBSS
used in algo.
Change-Id: I21fffc6f96d78634bc6ced6ac76a61d87a7d4bb9
CRs-Fixed: 2453992
[Patch 1/1]
Incase we have WMI backpressure issue, which
is not caused by host, collect the fw dump.
We trigger host dump when WMI Pending cmds reache max
wmi commands. If this feature is enable then we will
not assert host,rather will wait for fw to dump the logs
which can later be used by fw team for debugging.
To enable this debug feature:-
cfg80211tool wifi0 set_wmi_dis_dump 1
Change-Id: I499d83d5f014e953310481816e40c3c15b715620
Identify the WIN/MCC specific features. Move the features under feature
specific flags. Get rid of WIN/MCC specific code.
Change-Id: Iaf4e5befd7d574a20bea5c078201adbeac3b762c
Move WIN specific structures out of common datapath, WDI_ENUM
into common datapath and remove WIN specific header files inclusion
Change-Id: I8a0d9db4970f3ea9d966337caf178ebce55c28c5
Peer stats struct members initial value 0, so when other functions call
to update peer stats have 0 rssi value which updates mininum
rssi since its the least value. So initialize the rssi with invalid
value initially
Change-Id: Ife033598c7ac47a9a26595f97bff058570d3e91f
CRs-Fixed: 2403735
CCE stats are reported across rings today. Since HKv2 is a SMP, it
creates the possibility of missing stats when two or more CPUs are
updating the counters for the same protocol type. In order to avoid
this, we can either use locks or store stats on a per-CPU basis.
Since tagging happens on the core data path, locks are not preferred.
Instead, we use a per-ring counter, since each CPU operates on a REO
ring. Exception packets today go to Ring-0 (also normal rx Reo-0
go to Ring-0). Hence tags are maintained separately for exception
ring as well.
Change-Id: Ib01934619fb026bf64a8ac998eaec2d4df7f5a6e
CRs-Fixed: 2438143
With this feature, using appropriate commands, link layer, network layer,
transport layer and some of the application protocols can be tagged with
the user provided tag values for easier identification of protocols. The
supported protocols today are as follows.
ARP, DHCPv4, DHCPv6, DNS over TCP (v4), DNS over TCP (v6), DNS over UDP
(v4), DNS over UDP (v6), ICMPv4, ICMPv6, TCPv4, TCPv6, UDPv4,
UDPv6, IPv4, IPv6, EAP.
Receive packets are tagged by hardware. Tags are applied after the first
matching rule. Hence it is recommended that the rules are
programmed in such a way that tags are configured from application layer
to data link layer to get expected results.
Change-Id: Ibdc2bd2b78234f482074955e89fb93f05988eaca
Currently we are upadting sojourn stats for all tid.
but rate stats maintains stats for only data tids 0-7.
updating stats for tid value exceeding 7 is leading it to
assert.
Update correct tx rate, rx rate and sojourn stats.
Change-Id: Ib2f5791aa7b8e85aac6283c46f58ce7e821a559b
CRs-Fixed: 2428648 2429575 2429575
The datatype of average and round up tx rate was uint32_t which truncates
the upper byte of the average and round up tx rate value.
changing the datatype of average and round up tx rate from uint32_t to
uint64_t.
Change-Id: I3809ba7cfc73ec0b4609981e70d57112ac958f33
CRs-Fixed: 2409751
Vlan tagged STP pkts are received in host from
wbm exception path with wifi parse error code.
This is delivered to stack. Stats added for wifi
parse error and vlan tagged stp pkt count.
Change-Id: I25af5ab403ee7a46b4abe2f60328314d61587b80
CRs-fixed: 2375575
Use the time stamp taken during the updating of RSSI value to
calculate the time elapsed when the IOCTL call happens. Return
that value as delta age in ms.
Change-Id: I96d36a7a132b7a327d9d5a5ba3a318a82889ebd5
CRs-Fixed: 2394910
Delay counters per TID have been implemented for following types:
1. Linux stack to hw enqueue delay
2. HW enqueue delay to tx completion delay
3. TX interframe delay
4. RX interframe delay
5. RX frame delay from ring reap to networking stack
Change-Id: I836596cbd878a43955c18b4981cb5b7b43d4df5e
VOW stats is an extension of regular stats to capture
all drops per TID. Delay counters per TID are also
included.
Change-Id: If6087f37b32cf9ae4bb405190a358ad3c9750dd2
Add CDP APIs for:
a. To get/set rdk stats context into soc
b. To set rdk stats flag into soc
c. To flush rdk stats
Change-Id: I74e35f5fa244d6d38f46a4f64ebbad8a630589bd
Change API signature for dp_getrateindex to populate rate index
and add additional stats required for RDK.
Add QDF abstraction for EWMA average rssi
CRs-Fixed: 2397918
Change-Id: Id878971799c5df2ae60057a86b2769724ee0dcc5
Sometimes we receive num_msdu as 0 with ru_tones and ru_start
which cause OFDMA counter to get increament
Change-Id: Ib099a2143799551266e94bc9b8d281237092a46e
Add the WMI PDEV param 'wmi_pdev_param_ul_ppdu_duration' to
add command support to modify the UL PPDU duration.
Change-Id: If2f8ef02d4f992d91fa745599d5c08b1dfccceca
CRs-fixed: 2393139
populate TX OFDMA and TX MU MIMO information from
user rate tlv and display the same in fc_peer_stats.
Change-Id: If1dab15bbdf391fba00a701abd6024c420d1d8f7
Add command support to enable/disbale 'Spatial Reuse Value15
Allowed' parameter in the Spatial Reuse IE.
Change-Id: I755a15da7758704f2e833ddc61805d45654f0957
CRs-fixed:2345770
Add a missing NULL check for peer object in rx_da_learn API
Also add missing elements in pdev_stats_cmn_tlv structure.
CRs-Fixed: 2357352
Change-Id: Ie54fd0a6a45f00d60420c391098f22b0097de3ac
Radio band which is classified and it's operating in 5G_HIGH_BAND
or 5G_LOW_BAND or 5G_FULL_BAND freq range or NON_5G_BAND,
ie It's 2G BAND
Change-Id: I9d140960c4b1fdab41621a1b277c140323d86e59
CRs-Fixed: 2339508
