While ACS delayed worker scheduled and is running the function
wlan_hdd_cfg80211_start_acs(), ACS_PENDING has already been cleared by
wlan_hdd_cfg80211_start_pending_acs() before it, so the later coming
stop sap event can't cancel the running delayed worker and free the
sap context which need access by delayed worker.
Fix by clear ACS_PENDING after wlan_hdd_cfg80211_start_acs(), and move
cancel ACS delayed worker before cancel any scan, it can cancel ACS
scan invoke by delayed worker and avoid race condition.
CRs-Fixed: 2289364
Change-Id: Ibd771fc199a0778ac1d8f1f04ba22b49014437de
The MAC context ftm_msg_processor_callback is a remnant from the
legacy FTM support. Since this callback is no longer used, remove it.
Change-Id: Ibd375bcd91900654315681f7f9b56bf100090942
CRs-Fixed: 2298895
Add the basic infra for MLME CFG items and the APIs to be used from
other components.
Change-Id: I39654de8f7266089d574b85437a19e8d21f91249
CRs-Fixed: 2293825
During ssid restart currently driver send vdev stop and then
restart. There is no need to send vdev stop in this scenario and
direct vdev start is enough to set hidden ssid.
Thus remove vdev stop during hidden ssid restart.
Change-Id: Ide6826f73ecd51bbafa875ed547efeff4a410397
CRs-Fixed: 2298636
Currently the driver doesn't handle the nss update
if a prior connection is already present in DBS
mode. Suppose if a STA is already connected in
5ghz and the SAP comes up in 2.4ghz, the beacon
template should be updated with NSS = 1
Fix is to check whether the current hw_mode is in
DBS or not, and change the nss in the beacon template
accordingly
Change-Id: I54ead1fd26d705a821160b5bc5d816df1d2ab8f4
CRs-Fixed: 2288307
Currently VDEV Force cleanup happens only if FW is in recovery state
and not if target_ready is set to false. However, since FW down flag
is set for recovery case also, even during SSR, the VDEV Force clean up
is not triggered.
Force cleanup vdev for FW down case also in wma_vdev_detach.
Change-Id: I3ba6dc92c1c5ea1090f9f5dc9062775de6db1954
CRs-Fixed: 2298278
Several HDD logs have been identified as being excessive. Reduce the
logging level of these logs to avoid spamming dmesg.
Change-Id: I49e0f91c5d66051f9e6ffd991d86505a11faa346
CRs-Fixed: 2298385
To speed up recovery trigger debugging, pass the caller's function name
and line number, such that the group needing to do the initial triage
can be easily identified via the panic message.
Change-Id: Ibac141a62a990adf7a781d7ef64544d92ff4e31b
CRs-Fixed: 2298194
Ref id debug support adds an array of atomic_t to peer object
which significantly increases peer object size. Move this debug
support under the compile time flag WLAN_OBJMGR_REF_ID_DEBUG to
save memory.
Enable the compile time flag WLAN_OBJMGR_REF_ID_DEBUG for mcl.
Change-Id: Ie618bd049270d23def6ca37542f1e2948b6d32b5
CRs-Fixed: 2297976
Reduce log level for few prints to debug to avoid flooding
of prints to console.
Change-Id: I514585cc87d51ead15fb1f40d45f62023628d9bb
CRs-Fixed: 2295815
Do sap_ctx release for all DFS "Ignore" case.
Otherwise, the ref count may mismatch.
Change-Id: Ib3d7c416ec3942f4d0317825fa504bc2b5abd968
CRs-Fixed: 2297787
Make changes to the Kbuild and config files to
enable and compile crypto common component
Change-Id: Ie16acd71d7794aa8ffaf6e48596bc6f46294a1df
CRs-Fixed: 2294394
Remaining may be greater than its original value when
(remaining & 0x3)!=0, then OOB occurs when memcpy.To address
this, align the remaining after doing memcpy.
Change-Id: I3e39a791a76a272e82beb6561375e26ca84ec0f4
CRs-Fixed: 2259721
lim_process_ap_ecsa_timeout() contains a misleading indent. Reduce the
indentation of the affected code.
Change-Id: Ic18ebf88b0a754c8088005d22a9cec94313fa550
CRs-Fixed: 2297513
Currently, hdd_update_tgt_cfg() continues execution if allocation of the
pdev object fails. Unsurprisingly, this leads to numerous access issues.
Abort hdd_update_tgt_cfg() if allocation of the pdev fails.
Change-Id: I1c820994510a10949ef546cac06a8eb97ca0adf1
CRs-Fixed: 2297412
For SAP (2.4G) + SAP (5g dfs chan), the radar event
will be posted to all vdevs. 2.4 SAP will run into
failure in random chan selection.
Fix by ignoring radar event for Non dfs channel SAP.
Change-Id: I739f2a84f17941e501dfe52c9cd12afc6a42425f
CRs-Fixed: 2294077
The hosts sends the beacon template to firmware through the
command WMI_BCN_TMPL_CMDID. The firmware sends a TX complete
indication via the WMI_OFFLOAD_BCN_TX_STATUS_EVENT and upon
receiving this host decrements the CSA count.
The hosts waits until the csa count becomes zero and then sends
vdev restart to firmware. There are some issues with this
implementation when 10 beacons with CSA are taking more time
than 1 sec. This is because in STA+SAP case sometime the
WMI_OFFLOAD_BCN_TX_STATUS_EVENT is received after in 200-300ms.
If the host doesn't receive the channel change event, it gets
struck in the channel change.
To avoid this scenario, send the beacon template to the firmware
for every beacon interval without waiting for the beacon TX
complete indication from FW except for the first beacon template
updation. Introduced a new timer (ap_ecsa_timer) to update the
firmware with the beacon template.
Change-Id: I377768b87c96fd5064aa04d1ed5434a475e656ef
CRs-Fixed: 2294661
Revert I457c20f6ba908cac32cfc9b27fbaf980f1ec174d, which removes the
check to ensure recovery has been enabled via configuration before
starting the recovery process. This is a critical feature for internal
debugging. The check was moved into cds_trigger_recovery() to prevent
callers from bypassing this configuration and unconditionally asserting
the target firmware. Restore that check now.
Change-Id: Ieb347cfcd0eecd24f005d374c0fead07c34f3705
CRs-Fixed: 2296038
cds_trigger_recovery() already checks for various conditions before
actually triggering recovery. One of these checks ensures that recovery
is enabled, but some callers are checking to see if recovery is enabled
before calling cds_trigger_recovery() as well. Because of this, some
important checks are skipped, and crashes can occur when they should
not. Remove the redundant checks at the call sites for
cds_trigger_recovery() so that all of the recovery conditions are
properly handled, and the wlan driver avoids crashing when it should
not.
Change-Id: I8c26a002b66496a1eb06263f3f8b91ead739e3ac
CRs-Fixed: 2296008
When channel 4 is unsafe channel in 2.4g LTE coex ACS case,
the weight for channel 4 will be calculated as 0 by function
sap_sort_chl_weight_ht40_24_g, it's wrong because weight_copy
doesn't be initialized in this case, so acs channel select
may choose wrong channel to start sap.
Fix is to add initialization for weight_copy when weight is
SAP_ACS_WEIGHT_MAX.
Change-Id: I4aa0fb133774d9980146a9ceae9b91154bd15bbc
CRs-Fixed: 2282371
Scheduled scan (a.k.a Preferred Network Offload, PNO) is intended to be
used only for station interfaces. However, it has been observed that
userspace will send scheduled scan requests for non-station interfaces.
Reject requests to start or stop a scheduled scan on non-station
interfaces.
Change-Id: If5abd242f134518ac4e3d942c1513c66b5c50ff3
CRs-Fixed: 2295101
