This change allow Tx VDEV of MBSS mode to configured
dynamically by reset the VDEVs.
This change includes FW service bit parsing, checking
VDEV state of all VDEVs, sending MBSS information in
VDEV start command
Change-Id: I46b13629bd1c07be86b408d72c2967642ce8542e
CRs-Fixed: 2759229
When get vdev by opmode from psoc, objmgr will return vdev without
getting reference if vdev list isn't null and no matched vdev with
opmode.
Change-Id: I1bb29f074155a40c38a21a9f0534d5f756862031
CRs-Fixed: 2758693
Add pdev flags to indicate
1) scan radio support
2) DFS disable, This flag is valid only for a scan radio pdev.
CRs-Fixed: 2753799
Change-Id: I2e875b0233bd1c5bf5421821c35170f3412a582a
Adding support for iot_sim drop operation.
Drop operation will be handled in Rx direction.
Change-Id: If2e1c9663a69fcd16715cdd1d28639a388ea1c0c
CRs-Fixed: 2686309
Currently, size of the array to return dbgids in string format is
not specified explicitly. This array is expected to be updated
with the corresponding string when a dbgid is added in the
enum wlan_objmgr_ref_dbgid. Any miss in the updation would lead
to array out of bound access as the API string_from_dbgid()
tries get string corresponds to the newly added dbgid also.
Specify the maximum possible size as WLAN_REF_ID_MAX explicitly,
so that it returns "null" if the string corresponds a dbgid
is not defined.
Return the string only if the id matches or return "Unknown".
Change-Id: I1c835b8e9d681bf23f1bce866aa523cb41b9a134
CRs-Fixed: 2702696
Add support to populate 11AX wireless modes advetised in ext2 service
ready message. To support older FW that do not advertise this, use
existing host workaround to populate these in host itself.
Change-Id: I3b3b280672592c858bd3f6f0e368909a16bd30ee
CRs-Fixed: 2650136
The current bitmap used for vdevs in psoc is a two element
array of 32bit, thus supporting upto 64 bits bitmap.
In certain feature of AP use cases, there could be more
than 64 vdevs of multiple radios of a psoc, so the current
bitmap would not suffice.
Use the qdf_bitmap to define bitmap based on the max vdevs
supported by a psoc, which could be defined to higher value than
64 if a given AP feature is enabled.
CRs-Fixed: 2678131
Change-Id: Icd72f8dbe4654180dab993e3ce35d886c9e6ca43
Avoid inclusion of wlan_lmac_if_def headerfile in
wlan_objmgr_psoc_obj.h which led to inclusion of several
other components header files, so handling dependencies by
adding a forward declaration.
Change-Id: I9ad231152789a1d8d9c01fd772abe4a8b06ad0b4
Enhanced Multi-BSSID Advertisement is an enhancement to the
existing Multi-BSSID feature in terms of advertising
non-transmitted bssid profile using the transmitted bssid
beacon. Mandatory inclusion of RNR IE in lower-band AP
beacon to support Out-of-Band Advertisement of colocated
6Ghz AP may impose limitation in the beacon size. EMA AP
provides a standardized way of overcoming such a limitation
Relevant UMAC changes are:
1. Add fw_caps_ext support bit WLAN_SOC_CEXT_EMA_AP
2. Add vdev_control_flag WLAN_VDEV_MLME_FLAGS_EMA_MODE
3. Support of 32-bit ema_params in beacon_tmpl_params.
The 4 octets in this param field will respectively
indicate ema_beacon_profile_periodicity, ema_beacon_tmpl_idx,
ema_first_tmpl and ema_last_tmpl in the order of low to high
CRs-fixed: 2677701
Change-Id: I3d96fd3becd7609abb2529f977362bfa5401d600
1. CFR feature can be disabled through INI
2. Add a bit in pdev ext caps to indicate whether
CFR feature for pdev is enabled/disabled by user.
Change-Id: I3bbb6c23a0be087c64e45bffedb2338cb96717d8
CRs-Fixed: 2671620
Changes to support Beacon protection. Additional key ix 6 and 7
support BIGTK. Update beacon template for Beacon protection support.
CRs-Fixed: 2632290
Change-Id: Ic37d17f5076bb28d2e1f2430da039cc8b9f759b6
Currently vdev private data osif_priv gets allocation
separately and requires to be de-alloc separately.
This de-alloc needs to be taken care at different places
based on the vdev create failure or whenever vdev is freed.
As vdev private data is associated to the vdev and needs to
be freed if vdev is not there, it is good to allocate this
private data along with vdev so that there is no need
to maintain allocation and de-allocation of vdev priv data
separately.
As part of this change alloc the vdev priv data along with
the vdev allocation as a single memory and free of the vdev priv
data will be taken care as part of vdev free.
Change-Id: Ib442958c2d8684706830782d339c589c5f5daddf
CRs-Fixed: 2636222
spin lock is called without init while peer attach
move spin-lock init before get ref
Change-Id: Ibf21ac6a7b06c62f2e64a2d89154b21183b9c472
CRs-Fixed: 2628750
Array strings of size 73 may use index value(s) 73..74
Adding dbg ids to strings same as wlan_objmgr_ref_dbgid
CRs-Fixed: 2632424
Change-Id: I8eac1c4f015d54c626c2e74891d8c86ccfb962e4
Handle minidump logging using dynamic
configurablity options. Data structures
to be logged in minidump can be configured
using internal INI file.
Change-Id: I99f12b3f98c4a9c0e15c3e5d611019e6b8d0909a
A service bit is added to indicate Firmware supports sending NSS ratio
information to Host and Host receives the NSS ratio information from
Firmware as part of service ready ext event. Save this service bit in
soc's extcap feature bit. Extract the NSS ratio info from service ready
ext event and save the results in wlan_psoc_host_mac_phy_caps structure
to calculate NSS value.
Change-Id: I8fbee48d872b0724bbb629ad38b3c959736a3c39
CRs-Fixed: 2612959
Add API to set/get monitor vdev count in pdev object.
Also update the max peer count in pdev and psoc when FW allocated peer
count is different than host requested.
Number of vdevs and beacon tx offload max vdevs in wlan_res_cfg are updated
in target_if_update_pdev_tgt_info().
Also, add radio related parameters to get number of vdevs and peers per
psoc and pdev.
Change-Id: I0165f3bd4638280b45ad54391319806fba62e2fe
CRs-Fixed: 2600984
Remove pdev, vdev and peer dp handles from umac objects,
and also remove corresponding APIs used to set and get
these handles
Change-Id: I1abc8ba91e9a697b85d1711a9a37ce675e1f6d3d
CRs-Fixed: 2602133
The current implementaion check for peer, vdev and pdev leaks on
psoc in order and if any leak is found for peer then QDF_DEBUG_PANIC
is called and vdev and pdev leaks are not checked. Similar is the case
if vdev leak is found, pdev leaks are not checked
Adding a wrapper API to check all the leaks and then do panic if any
leak is found
Change-Id: Icf6622760f3646b82f893beb7415b95307e2ccd7
CRs-Fixed: 2599228
Structure memory is being optimized by aligning field with
bus address length using pokeahole tool.
This patch optimizes structure linked in obj_mgr and scheduler
modules.
Structure Bytes saved (64bit) Bytes saved (32bit)
scheduler_ctx 8 bytes 4 bytes
wlan_channel 8 bytes 8 bytes
Change-Id: I298946b55328d8d9b564c140e0a59e0b8702fab0
CRs-Fixed: 2587842
6Ghz SAP needs to send either a probe response or fils
discovery at every 20ms.
Add a new feature to configure the probe response or
fils discovery frame.
Change-Id: I3b9842021db94515ae4dccbcdc573a4cd84caa56
CRs-Fixed: 2591147
Allocate node for new entry and add it to existing list of function or line
If function or line already present in list then increment count
Change-Id: I3d737dcd33862f133b52c6d694c89f6d6b1517a5
Add function name and line number while taking/releasing
references for vdev to trace Object Manager references
Change-Id: Ie8a7d77db2f3c7b58536ab267c665299cb67152e
Add function name and line number while taking/releasing
references for peer to trace object manager references
Change-Id: I93c30d62ecaa979f8c2680eec68f723d2d3c4292
In wlan_objmgr_get_vdev_by_macaddr_from_pdev driver checks the
first vdev matching the mac address and try to get ref and return
NULL if it fails.
In case if a vdev is logically deleted but not physically deleted
(some ref are pending) and a new vdev is added with same mac address
at the tail of the vdev list, the
wlan_objmgr_get_vdev_by_macaddr_from_pdev always return NULL cheking
for the logically deleted vdev, even when a valid vdev is present
after the logically deleted vdev.
Thus continue to next vdev if try get ref fails for the vdev.
Change-Id: Icd67ce8830460fca7bb4c19e81b2e9f764fb5dba
CRs-Fixed: 2580697
Restricted 80+80 MHz capability is reported by FW in service bitmap.
Based on this support set soc's extcap feature bit.
Please note, wmi_service_bw_165mhz_support will be renamed as
wmi_service_restricted_80p80_support once the FW changes are available.
Change-Id: I88f89eecd916c40ea8669c792dde3a335e4bac56
CRs-Fixed: 2579543
Define framework to notify registered callbacks on peer freed.
Interested modules can register their callbacks with object manager.
Change-Id: I9ab0e45f7841b1609b9ada3b50335299b462b630
CRs-Fixed: 2578099
Move the vdev response timer from the vdev object manager structure
to the psoc mlme structure.
Change-Id: Ieb87ac6549aa23e0beb61441fea459d3db78c2f3
CRs-Fixed: 2563410
There is use-after-free of vdev object in wlan_objmgr_vdev_obj_create
wherein vdevid is being accessed to log the create failure after the
vdev is freed.
To resolve the issue, Log the error with vdev_id before freeing the
vdev
Change-Id: Ia509f90cd2219f657ecdecbfb26d397daa3beda6
CRs-Fixed: 2559556
Currently, the timeout value LOG_DEL_OBJ_DESTROY_ASSERT_DURATION_SEC is
set at 24 seconds. This is not sufficient for various cases where the
delay caused are genuine (FW and HW delays), thus leading to unwarranted
device assert.
Increase the timeout to 32 seconds to mitigate this.
Change-Id: I799b45b0d5f25a9fcf68f88d385994e31c56e939
CRs-Fixed: 2546641
Add debug code to print the vdev, pdev and psoc info before getting
destroyed. This will help in cases where we dont get crash dumps
for panics and we need to look up few important data, which
can be done by enable object manager debug.
Change-Id: Iab1895d348ccf225ee6390abef26b76936fbe560
CRs-Fixed: 2528290
During vdev reference release if double free is attempted for, then
the vdev references are printed. But the vdev id and the reference id
for which the reference release was attempted is not printed.
Add change to print this log, which will help in debugging vdev
reference release related issues.
Change-Id: I8c1942dc770a1dce2e25cda8c3c6aa8c056afb8e
CRs-Fixed: 2531227
Currently, FW has TTL of 5 sec for management frames, if a frame
is queued just before logical deletion, it takes max 5 sec to complete,
by considering other latencies, increaseing it to 8 sec.
Change-Id: I6861d9557489bcf10e60ff32d06e88be23535d48
CRs-Fixed: 2526239
Change log level to debug level since any console logging
under the spin lock has side effects due to slow UART
Change-Id: I21dca8f4eb9ba563d2ce96274d32405d1817d13e
CRs-Fixed: 2521056
wlan_pdev_vdev_list_peek_active_head can't be used out of object
manager, because object manager structures can't be referenced
outside object manager.
Add wlan_pdev_peek_active_first_vdev which can be used out of
object manager, because it only needs pdev parameters.
Change-Id: I1d32ec2b5342dbdcbbb817d80623f802011892b0
CRs-Fixed: 2507969
WIN and MCL both uses common targer_if code for vdev manager.
So legacy code and "CMN_VDEV_MGR_TGT_IF_ENABLE" macro is removed.
Change-Id: I2984ae44f3a7cfa01b8f1455353d09deb4db5759
CRs-Fixed: 2503804
