Currently, ML IE address update is missing while copying the beacon data.
This may result in illegal memory access when ML IE accessed from copyied
scan entry after original scan entry got freed.
To avoid this, update ML IE address in new scan entry while copying
scan entry.
Change-Id: I6161481cbd13573b8177f122f7d26d177cc07aaa
CRs-Fixed: 3052302
Do not limit the max length of RSN/WPA IE as they can contain multiple AKM
and CIPHER. We need to consider all the variables to limit the max length.
Change-Id: I204f86d7c773d0c104ad1f58b3648d6c5577af94
CRs-Fixed: 3051247
The API that takes in the input 6G AP power type and updates current
channel list, allows setting the same power type which is not needed and
is a costly operation.
Change-Id: Ia690f40a6796a0db243f0abd15f2eebc8340d1d9
CRs-Fixed: 3051502
The power event received status is set when AFC power event is received
and is reset unconditionally when AFC expiry event received.
Reset AFC power event received status only on receiving AFC expiry event
with sub-type AFC_EXPIRY_EVENT_SWITCH_TO_LPI.
Change-Id: Ib7c1d12cbc2797ddbb19d73fd38d82d100adf3d3
In case when connect req is received while ML connect is in progress,
disconnect is issued with SB_disconnect as source but sb disconnect is
not handler in join active. So, send osif_cfg_disconnect as a source
Change-Id: I9604e23193ba3aef334f0873d2460a992b1914ea
When the frequency ranges and channel frequency indices in the AFC
server response are not the same, the current channel list has
channels enabled, that are absent in the CFIs.
This is because the AFC master channel list is built by intersecting
the frequency ranges in the AFC frequency object and state of the
channels in the SP AP master channel list.
To fix this issue, build the AFC master channel list by intersecting
the frequency ranges in the AFC frequency object and state of the
channels along with the CFIs received in the AFC channel objects from
the target.
Change-Id: I12cc54f90b75b9a7be491e7dd2e9c101be6dd1f6
CRs-Fixed: 3042040
Add a CDP api to update the packet capture mode in dp_soc
when it get updated by user using vendor command.
Change-Id: Id0856aeeb5e1a77e1ce6fb23562fdbff4a2fb320
CRs-Fixed: 3048344
wma to target_if convergence code is guarded under the feature
flag ROAM_TARGET_IF_CONVERGENCE and it's is enabled currently.
Remove the flag usage and remove the deprecated code(else part)
also.
Change-Id: Id3171956028d6086f85eac73865c37498926d6cc
CRs-Fixed: 3049946
Add 11be D1.0 Mac and Phy capability defines.
Corrected lengths if the capability fields.
Change-Id: I40e2d048946857498c425ca01c3010f255081833
CRs-Fixed: 3025958
For enabling LPI/SP mode host service flag bit is expected
to be enabled. Updated the variable name appropriately to
correctly reflect interpretation of the Host service flag.
CRs-fixed: 3024535
Change-Id: Ie5fa2b4036074bf5304c17984007401f821d6d04
Add dp functionality to collect stats for sysfs buffer.
Add both host and fw stats.
Change-Id: I64f84804d36cccec9d701925d96cc7ee96943b7a
CRs-Fixed: 3035864
Currently, host allows NAN log messages from firmware upto a max
size of 200 bytes. But firmware may need to send bigger messages
than this in case of stats events as tx/rx stats message length
can go upto 350 bytes.
So, allow NAN messages upto 400 bytes to avoid splitting
the stats messages.
Change-Id: Ibb03944da81ed8d378dadbf4750013e0fe941e57
CRs-Fixed: 3049258
The "wmi_pdev_dfs_radar_detection_event" has an unused field "chan_freq".
It currently holds the value of primary 20MHz channel. With the
introduction of 11BE chipsets, this field is changed to hold the value of
the center frequency of the channel width on which the radar is found.
This new change is indicated by a wmi service
"wmi_is_radar_found_chan_freq_eq_center_freq".
For the Chipsets that support this service, the radar found frequency
can be calculated by mere addition of the fields "chan_freq" and
"freq_offset" field.
Change-Id: I8d2ce0023e2feb6e749ca8d7d5f547fafc0fdf98
Handle QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_TIME_TSF attribute
in TWT setup command to provide absolute TSF value to firmware.
This helps application to start TWT session on specific TSF value.
Change-Id: Ic25b45e88599a024e6c4e6bb265ea90122405d05
CRs-Fixed: 3029020
Send responder pm mode info in twt setup event and twt
get session parameter response.
Change-Id: I1f58e0bed62f152d84cec20ff7924d05e126347f
CRs-Fixed: 3029014
The multicast echo check feature is moved to hardware in
Beryllium. Enable this hardware feature and also disable
the MEC handing code for Beryllium in the host.
Change-Id: I86d319963191f3ed77aba16dcccbc659906edd9f
Add some 11BE files inclusion under feature flag to fix
compilation error when 11BE files are removed.
Change-Id: I809c5a3e3be2b6a7db35fa420714063b730ebe1d
Spectral scan bandwidth value that is received over NL80211 socket will be
in NL80211_CHAN_WIDTH format. Convert it into phy_ch_width format before
using it in the driver. Similarly, convert the spectral scan bandwidth to
NL80211_CHAN_WIDTH format before sending over NL80211 socket.
Change-Id: Ic3b464bff6ac62a9d0c1f915118a4ca6db416252
CRs-Fixed: 3048195
When the AFC dummy server sends the frequency range with only the
UNII-6 channels, the AP still moves to SP and comes up on the
UNII-6 channel.
In reg_fill_max_psd_in_afc_chan_list, the channels are enabled in the
AFC master channel list only based on the frequency ranges present
in the AFC frequency object. There is no condition present to check
if the channels are supported by the reg_rules sent by the target
in the WMI_REG_CHAN_LIST_CC_EXT_EVENT.
To fix this issue, before enabling the channel in AFC master channel
list, check if the channel is also enabled in the SP AP master channel
list.
Change-Id: I2cbe69acf13bff57662f77eeab70e3f3a3240196
CRs-Fixed: 3042428
FW sends Spectral scan detector info TLV in WMI_PDEV_SSCAN_FW_PARAM
event to indicate the information of a detector participating in a sscan
session. FW sends one TLV of this type for each detector participating
in a spectral scan session. Add support to process the TLV and update
the spectral host data structures accordingly.
CRs-Fixed: 3044193
Change-Id: Ie17b6ea9336ada7a00e4594fa2f7f49ef3d443e5
FW sends Spectral scan chan info TLV in WMI_PDEV_SSCAN_FW_PARAM_EVENTID
event to indicate the channel information for a spectral scan session.
Add support to process the TLV and update the spectral host data structures
accordingly.
CRs-Fixed: 3044162
Change-Id: Ibbf7f6bbbb267123bbdf44bcfffa2cfb1c2926df
wds in Beryllium is managed by hardware.
Make use of hardware managedwds and disable
the corresponding wds handling done in host
for Beryllium.
Change-Id: I39f23cb40c6c5f85ada8ce59c92ff2855bb18da3
Currently ML secure connection is failing for second link at STA.
This is because, auth type is not proper in connect request crypto
params. Hence failed to get the partner scan entry with matching
auth type.
To resolve this, reset auth type while preparing partner link connect
request.
Change-Id: Ic291ad4e4405ea2f625c1e47d052166eba21036b
CRs-Fixed: 3040789
Remove logic to enable/disable wake msi for drv systems. Today, during
WoW suspend sequence, between hif pci bus suspend and hif pci bus
suspend no irq, wake msi is getting disable temporarily. In case
fw toggles wake msi during this period, then the wake msi is lost,
which can lead to device not waking up for fw triggered wakeup.
Add the fix to remove enable/disable wake msi from suspend/resume
path and keep wake msi always enabled.
Change-Id: Idad0805f66ead4079d67577fa1151f73567511a3
CRs-Fixed: 3042261
1. Initialize the temporary variable to read snapshot to zero.
2. Read correct number of shared snapshot values.
CRs-Fixed: 3026029
Change-Id: I6f4fc9d1d2bfe4818304be16f7c80830b4fb260b
Export symbols("mlo_glb_h_shmem_arena_ctx_init" and
"mlo_glb_h_shmem_arena_ctx_deinit") for other modules.
CRs-Fixed: 3026023
Change-Id: I2a7c55f119be531b495a0f42a9b058734feb0ebb
With this change add log with scan channels list dump to print
if NAN is enabled or not for any frequency.
Change-Id: I81f5017c7f146d2c7bd227601ae320d9cc67f82f
CRs-Fixed: 3042903
Following are the changes:
1. Add macros relevant to the addition of the 320 MHz root to the preCAC
tree.
2. Adding 320MHz bandwidth in switch case and separating
'case CH_WIDTH_320MHZ' using a compile time macro ( 11BE), forces us
to use the macro inside the function, which is not allowed by the
coding guideline.
Convert the "switch case" mapping (which is generally a binary search)
into a linear search of a mapping (BW -> bonded pair) array , thereby
using the macro WLAN_FEATURE_11BE to separate the 320MHz bandwidth
in the data structure space instead of doing the separation inside
the function space.
Change-Id: Iaab2328deef1cb7b2ff82bafe5d3cd2ea137e725
On Beryllium architecture, PHY DMA applies a 32-bit byte swap to assist
in efficient Host reads when connected to a big-endian Host.
This is done to avoid byte swapping at the Host.
So, if the Host reads this data 32-bit word at a time, the byte order
would be intact. Report headers are not a problem because as they are
composed of 32-bit words. For FFT bins, read each DWORD at a time and
extract FFT bins out of that DWORD. Make this change in a generic way to
keep the design uniform across different chipsets and endian modes.
CRs-Fixed: 3042188
Change-Id: Idff1ac7eb5e18c692c9ee8b19b9ae9e6b962d486
Add Spectral APIs to convert channel width values
from enum phy_ch_width to nl80211_chan_width and
vice-versa.
CRs-Fixed: 3029184
Change-Id: I60fb7fb04b943b0d70c569ff6587e5e8efd7722b
When processing a peer or southbound disconnect on the non assoc link,
there is a vdev stop issue due to the correct state not being set. For
this link, set the disconnect source as MLO instead of passing it down
from the caller.
Change-Id: I8db444e7c80659a1a1026a53326e99c96ef631f0
CRs-fixed: 3040658
Populate the list of supported spectral scan bandwidths for different
targets and use that in populating the detector list.
CRs-Fixed: 3042448
Change-Id: I5dac2c845843698bbafac64a01517acfbe120180
Initialize the variable "segid" to prevent the usage of junk value.
Dont dereference the spectral-lmac object if the same is NULL.
Change-Id: I5206a99017f77e5c94368d91171a7eb05745933c
Add new vendor command to configure monitor mode packet filter
parameters which includes data/mgmt/ctrl frame types.
Change-Id: Ie5e5d35b725e3d1b617edc1c889dc269b22a3673
CRs-Fixed: 3025489
Add disconnect wake lock reason code to add a wake lock
for WiFi disconnection.
Change-Id: I2ac33239c9df76d7c92429b9ada0380ad79fc72c
CRs-Fixed: 3045132
Define QDF API for virtual memory allocation and free.
Also add new api to get time of the day in microseconds.
Change-Id: I2921055bbb6b5d2a1105d19448b2a10fa2d6ccc5
CRs-Fixed: 3038180
