for a PPDU monitor status can be split across multiple status buffers,
If status buffer continuation is carried in next NAPI budget,
store ppdu status buffers to process in next reap context.
Change-Id: Id00646fa4edb55f3540e23ad327952bf0f5d9889
CRs-Fixed: 3147113
For platforms which CONFIG_BAND_6GHZ undefined, build failed for
implicit declaration of function
reg_convert_supported_6g_pwr_type_to_ap_pwr_type.
Change-Id: Iefaef8ea64f76f07e040403ada145c99c29db19a
CRs-Fixed: 3147319
Read out of bound due to invalid cookie and cause device broken. This
change checks cookie before using it as index of DBR buffer pool.
Change-Id: I1abc7d771cc62a7dd2dfe98784bf8ef2710f26ca
CRs-Fixed: 3144133
Function wlan_cp_stats_twt_get_peer_session_params() is missing
its documentation block, so add it.
Change-Id: I050d45df1861de02998039b76c8c2a7da59af669
CRs-Fixed: 3137344
Currently HW TX queue HP value is updated for every TSO segment enqueue,
as a part of optimization update HP only for the last segment.
Change-Id: Ibe349a1e6f55932bf780e1f755f13841078a493f
CRs-Fixed: 3138142
Fetch phy addresses for wbm release ring descs
in the cookie conversion enabled case
Change-Id: I420dc395bfa7b783dfed98b7258e7c0f0728e543
CRs-Fixed: 3146766
API reg_get_channels_from_opclassmap populates channels from opclass map to
reg_ap_cap as supported and non-supported channels. But for 6g opclass 133
and 134, non-supported channels were also getting reported as supported
channels.
This was due to an error in the logic of reg_get_channels_from_opclassmap
API for opclass 133 and 134. The 20Mhz channels towards the end of the
channel list in the op_class_tbl were causing the issue.
To address this issue, add a logic to get the supported and non-supported
channels from the cfi list object of op_class_tbl for 6GHz in the
reg_get_channels_from_opclassmap API. Also remove the 40MHz centre channel
calculation condition for 6GHz in reg_get_chan_or_chan_center API as it is
being handled in the new API.
CRs-Fixed: 3133022
Change-Id: If6ea18f79786c8549a1c75c557adffa178dd5c71
Add support to receive the fft_recapture arg value
from spectraltool, handle the FFT recapture config and
pass this to FW. The recapture feature must be
enabled only for spectral scan period > 52 us and
Normal Spectral scans.
Change-Id: Ied637704d25bb15bff2139a215da7481d4f80e4f
CRs-Fixed: 3140890
With multiple radio supporting IPA offload path, the g_ipa_config
is getting free when doing wifi unload for single radio, which is
leading to an issue of early free of g_ipa_config variable.
Fix is check if all the soc are down and then only free the
global struct for IPA.
Change-Id: If8fbc7a72c91a26e6f9e680711cd58429f8a1e99
CRs-Fixed: 3137091
prefetch certain nbuf fields and nbuf data fields, this
will ensure these fields are in cacheline by the next
iteration of the rx processing loop.
CRs-Fixed: 3146589
Change-Id: I69fd9a7800c7e881cf6635f329343195d19735c5
The per packet info feature can be enbaled to support enhanced
stats independent of mesh mode.
Change-Id: I852e7a958c520901b6f418d30deb53fa2f68fb68
CRs-Fixed: 3079000
Add the supported 6g power types dispatcher APIs to
i) get the best 6g power for a given frequency.
ii) convert input 6g ap power type to supported 6g power type enum.
iii) get the 6g ap power type from supported 6g power type enum.
Change-Id: I4b8bce5f23c7c0b95f9192ff20d90a908b3e0bd7
CRs-Fixed: 3110989
Adding new API to bypass scanning and connection
restrictions to bss operating in 6GHz with different
country code.
This API is based on a cfg item which can be configured
separately from safe mode or rf test mode.
Change-Id: I47396ac8793172e94499377cb0b980f7eee0f39e
CRs-Fixed: 3135147
While Unloading WIFI ko IPA deinit path is called thrice
and leading to double free issue which is causing kernal
panic, FIX is call the IPA deinit only once for each soc/pdev.
Change-Id: I3b5bd500afabe45cb8d1062e2c82a4b338f28544
CRs-Fixed: 3130590
Due to the nature of discrete channel lists for each
power mode on the host driver, it is currently not
possible to scan 6GHz channels which are not part
of the operating regulatory power mode.
To enable scanning all 6GHz channels irrespective of the
regulatory power mode (i.e., standard, low, etc.), the
existing sanity checks for the regulatory current channel
list need to refer to the super channel list
instead.
Additionally, these sanity checks need to check the
channel state and flags for the best power mode instead
of the current power mode. This will allow the scan
manager to access all 6GHz channels irrespective
of the current regulatory power mode.
Multi-band operation (for radios operable on 2.4GHz,
5GHz and/or 6GHz) is also ensured in these sanity
checks.
CRs-Fixed: 3140935
Change-Id: If10c617834dd89f4bbd99669318fd84c63421755
Since lvl_idx maybe get value large than
param_buf->num_temp_range_stats, then out
of bounds will happen when read array of
wmi_tt_stats.
Change-Id: I85b29216272952102dca41792c290baf285a8e31
CRs-Fixed: 3136333
Currently the detection logic for non-ofdma packets based
on the ppdu_type_comp_mode and ul_dl is incorrect.
Fix the logic to detect non-ofdma packets from USIG header.
Change-Id: Ic029a2fea948595157146e4105337d02d2e5ed43
CRs-Fixed: 3143088
In case of empty HW descriptor, sw cookie is not valid.
Instead, HW reports ppdu_drop_cnt, mpdu_drop_cnt and
tlv_drop_cnt.
Do not process sw desc, if it's empty HW desc indication.
In case of flush and trucanted PPDU, status buffer need to be discard,
added handling for same.
Change-Id: I1219f71645072bb9e0e80ff271fa354f305c7961
CRs-Fixed: 3144525
Add support to handle the FFT recapture config and
pass this to FW. The recapture feature must be
enabled only for spectral scan period > 52 us and
Normal Spectral scan.
Change-Id: I6b92fcd674ae95bcd0a23892ef9ccc6ba487d6ad
CRs-Fixed: 3140890
When mlo_dev_ctx is not initialized, it causes NULL ptr
access causing crashes.
Add NULL check in mlo api's to avoid the issue.
Change-Id: Icd7472cab22e3ff441cc9327f0443adb939bbc05
CRs-Fixed: 3143777
Add Legacy interrupt changes for QCN9224 target. Added code to calculate
hif group for DP interrupts and initialize legacy interrupts for the same.
Change-Id: I1b2f81905d3ce840fea172b13cbd192f041913d4
CRs-Fixed: 3139986
The number of BTM candidate info TLV is sanitized against the
total number of candidate info in the roam stats event. But
the condition for validation is not correct. So BTM request
candidates and preferences are logged as 0.
Fix invalid btm candidate TLV conditional check in
extract_roam_trigger_stats_tlv.
Change-Id: Ib96cd8c2ba84726b23490bcaf8a934cca2c82d2c
CRs-Fixed: 3142568
Add feature support to tag first packet that wakes up HOST from WoW.
rx_pkt_tlv.rx_msdu_end.reserved_1a field is used by TARGET to meet
such request.
Change-Id: I3d37e13e8cff49bc4f622d3070a19e4c4be56417
CRs-Fixed: 3137621
As part of TX FW metadata V2 global sequence number based
and SVC ID based support added.
Change-Id: Iefee2c47ecbebf6edfec9a687ef67e0e270bbf06
CRs-Fixed: 3136931
Currently, VDEV connected links bitmap is not being updated properly
for link VDEVs. Because of this, during the disconnect assoc peer
is being deleted first instead of link VDEV peer.
To address this, update VDEV connected links bitmap after STA link
connection complete.
Change-Id: Id8465948fbb3af2f063e04ec9403cb4e3a6f98d8
CRs-Fixed: 3125636
Intrabss check for NAWDS was added as a temporary fix to resolve the
issue of selfbridge enteries present in AST table. The actual reason
is loopback pkt received with one's own bridge mac. To avoid this, add
a check for not sending out any packet with an invalid peer id in the
ast table.
Change-Id: Ia4c520bcc8b7077f0b484a0bc40c4d26db77c3f4
CRs-Fixed: 3135142
Currently the TWT rx frames are dropped in
tgt_mgmt_txrx_rx_frame_handler considering them as unspecified
packets as action category for TWT is not defined.
Define TWT action category so that the TWT frames will not be
considered as unspecified frames and dropped while processing.
Change-Id: I2d9c01e89029bcbb379a5a9c77a7d101de155d6a
CRs-Fixed: 3087275
Add new reg API to check if frequency is active (non-passive)
or not from the secondary channel list.
The API checks the channel state against CHANNEL_STATE_ENABLE.
Change-Id: If41850563e680659ea815f09207ec0b854a2f040
CRs-Fixed: 3136785
